Near-Infrared Light-Driven Efficient Tumor Elimination via Strong Oxidative Photogenerated Holes in Donor-Acceptor Supramolecular Porphyrin.

Efficient photocatalytic tumor therapy relies on deep tissue penetration via near-infrared (NIR) light absorption and potent oxidative stress induced by efficient photogenerated hole (h) migration. Herein, we report a supramolecular donor-acceptor (D-A) structure fabricated by integrating self-assembled tetra-(4-carboxyphenyl) porphyrin (SA-TCPP) with amino-functionalized graphene quantum dots (GQDs-NH). The D-A configuration significantly narrowed the band gap for extended NIR absorption and amplified the interfacial electric field 6.

Organic oxidation-assisted hydrogen production: glycerol electroreforming to formate on nickel diselenide nanoparticles.

The energy efficiency of water electrolysis is limited by the sluggish kinetics of the anodic oxygen evolution reaction (OER), which simultaneously produces a low-value product, oxygen. A promising strategy to address this challenge is to replace OER with a more favorable oxidation reaction that yields a valuable co-product. In this study, we investigate the electrochemical reforming of glycerol in alkaline media to simultaneously produce hydrogen at a Pt cathode and formate at a NiSe₂ anode.

Adding Clip Before Endoscopic Cyanoacrylate Injection Decreases Ectopic Embolisms in Gastric Varices: A Randomized Controlled Trial.

Introduction: Ectopic embolism caused by cyanoacrylate migration is a severe complication. We aimed to test the hypothesis that prior clipping can reduce ectopic embolism secondary to endoscopic cyanoacrylate injection (ECI) in gastric varices with a gastrorenal shunt.

Methods: In this multicenter, open-label, parallel, randomized controlled trial, patients with fundal gastric varices and gastrorenal shunts from 10 tertiary hospitals were randomly assigned to clip-assisted ECI (Clip-ECI, n = 35) and conventional ECI groups (Con-ECI, n = 35).

Balancing Electronic Spin State via Atomically-Dispersed Heteronuclear Fe-Co Pairs for High-Performance Sodium-Sulfur Batteries.

Room-temperature sodium-sulfur (Na-S) batteries are emerging as a promising next-generation energy storage technology, offering high energy densities at low cost and utilizing abundant elements. However, their practical application is hindered by the shuttle effect of sodium-polysulfides and the sluggish kinetics of sulfur redox reactions. In this study, we demonstrate a heteronuclear diatomic catalyst featuring Fe and Co bimetallic sites embedded in nitrogen-doped hollow carbon nanospheres (Fe-Co/NC) as an effective sulfur host at the cathode of Na-S batteries.

Metal Doping Activation of Anion-Mediated Electron Transfer in Catalytic Reactions.

Heteroatom-doping has emerged as a transformative approach to producing high-performance catalysts, yet the current trial-and-error approach to optimize these materials remains ineffective. To enable the rational design of more efficient catalysts, models grounded in a deeper understanding of catalytic mechanisms are essential. Existing models, such as -band center theory, fall short in explaining the role of dopants, particularly when these dopants do not directly interact with reactants.

Anionic Doping in Layered Transition Metal Chalcogenides for Robust Lithium-Sulfur Batteries.

Lithium-sulfur batteries (LSBs) are among the most promising next-generation energy storage technologies. However, a slow Li-S reaction kinetics at the LSB cathode limit their energy and power densities. To address these challenges, this study introduces an anionic-doped transition metal chalcogenide as an effective catalyst to accelerate the Li-S reaction.

Unsymmetric Protonation Driven Highly Efficient HO Photosynthesis in Supramolecular Photocatalysts via One-Step Two-Electron Oxygen Reduction.

Photocatalytic hydrogen peroxide (HO) production has emerged as an attractive alternative to the traditional anthraquinone process. However, its performance is often hindered by low selectivity and sluggish kinetics of oxygen reduction reaction (ORR). Herein, we report an anthrazoline-based supramolecular photocatalyst, SA-SADF-H, featuring an unsymmetric protonation structure for HO photosynthesis from water and air.

Surface Selenium Coating Promotes Selective Methanol-to-Formate Electrooxidation on NiSe Nanoparticles.

In the quest to replace fossil fuels and reduce carbon dioxide emissions, developing energy technologies based on clean catalytic processes is fundamental. However, the cost-effectiveness of these technologies strongly relies on the availability of efficient catalysts made of abundant elements. Herein, this study presents a one-step hydrothermal method to obtain a series of NiSe nanoparticles with a layer of amorphous selenium on their surface.

The Effect of Osteoprotegerin (OPG)/Receptor Activator of Nuclear Factor-κB Ligand (RANKL)/Receptor Activator of Nuclear Factor-κB (RANK) on Aortic Valve Calcified.

Objective: To evaluate the effect of osteoprotegerin (OPG)/receptor activator of nuclear factor-[Formula: see text]B ligand (RANKL)/receptor activator of nuclear factor-[Formula: see text]B (RANK) nuclear factor on aortic valve calcification.

Methods: The aortic valve tissue was collected from 132 aortic stenosis (AS) patients who underwent valve replacement. The valve tissue was stained with hematoxylin eosin (HE) and alizarin red calcium salt deposition.

Hydrothermal nickel selenides as efficient electrodes in alkaline media: application to supercapacitors and the methanol oxidation reaction.

The advancement of active electrochemical materials is pivotal for enhancing energy conversion and storage technologies, which is essential for a sustainable future. Furthermore, achieving cost-effective technologies necessitates avoiding the use of noble metals and low-throughput processes that require high vacuum or high temperatures. Herein, we describe in detail a simple solution-based protocol to obtain a series of phase-controlled nickel selenide nanomaterials.

Enhanced Methanol Electrooxidation and Supercapacitive Performance via Compositional Engineering of Colloidal Ni-Co Alloying Nanoparticles.

Among renewable energy technologies, particular attention is paid to electrochemically transforming methanol into valuable formate and storing energy into supercapacitors. In this study, we detailed a simple colloidal-based protocol for synthesizing a series of alloy nanoparticles with tuned Ni/Co atomic ratios, thereby optimizing their electrochemical performance. With the addition of 1 M methanol in 1 M KOH, the optimized composition was able to electrochemically produce formate at 0.

Electronic Spin Alignment within Homologous NiS/NiSe Heterostructures to Promote Sulfur Redox Kinetics in Lithium-Sulfur Batteries.

The catalytic activation of the Li-S reaction is fundamental to maximize the capacity and stability of Li-S batteries (LSBs). Current research on Li-S catalysts mainly focuses on optimizing the energy levels to promote adsorption and catalytic conversion, while frequently overlooking the electronic spin state influence on charge transfer and orbital interactions. Here, hollow NiS/NiSe heterostructures encapsulated in a nitrogen-doped carbon matrix (NiS/NiSe@NC) are synthesized and used as a catalytic additive in sulfur cathodes.

Nickel foam supported Mn-doped NiFe-LDH nanosheet arrays as efficient bifunctional electrocatalysts for methanol oxidation and hydrogen evolution.

Electrochemical upgrading methanol into value-added formate at the anode in alkaline media enables the boosting production of hydrogen fuel at the cathode with saved energy. To achieve such a cost-effective and efficient electrocatalytic process, herein this work presents a Mn-doped nickel iron layered double hydroxides supported on nickel foam, derived from a simple hydrothermal synthesis. This developed electrocatalyst could act as an efficient bifunctional electrocatalyst for methanol-to-formate with a high faradaic efficiency of nearly 100 %, and for hydrogen evolution reaction, at an external potential of 1.

Enhanced Electrochemical Hydrogenation of Benzaldehyde to Benzyl Alcohol on Pd@Ni-MOF by Modifying the Adsorption Configuration.

Electrocatalytic hydrogenation (ECH) approaches under ambient temperature and pressure offer significant potential advantages over thermal hydrogenation processes but require highly active and efficient hydrogenation electrocatalysts. The performance of such hydrogenation electrocatalysts strongly depends not only on the active phase but also on the architecture and surface chemistry of the support material. Herein, Pd nanoparticles supported on a nickel metal-organic framework (MOF), Ni-MOF-74, are prepared, and their activity toward the ECH of benzaldehyde (BZH) in a 3 M acetate (pH 5.

Platelet-derived growth factor subunit-B mediating the effect of dickkopf-1 on acute myocardial infarction risk: a two-step Mendelian randomization study.

Previous studies have indicated a potential connection between plasma levels of Dickkopf-1 (DKK1) and platelet-derived growth factor subunit-B (PDGF-B) with the development of atherosclerosis. However, the causal relationship between DKK1, PDGF-B, and the risk of acute myocardial infarction (AMI) is yet to be established. To address this research gap, we conducted Mendelian randomization (MR) and mediation analyses to investigate the potential mediating role of PDGF-B in the association between DKK1 and AMI risk.

Brookite TiO Nanorods as Promising Electrochromic and Energy Storage Materials for Smart Windows.

Electrochromic smart windows (ESWs) offer an attractive option for regulating indoor lighting conditions. Electrochromic materials based on ion insertion/desertion mechanisms also present the possibility for energy storage, thereby increasing overall energy efficiency and adding value to the system. However, current electrochromic electrodes suffer from performance degradation, long response time, and low coloration efficiency.

Identifying the Role of the Cationic Geometric Configuration in Spinel Catalysts for Polysulfide Conversion in Sodium-Sulfur Batteries.

An ABX spinel structure, with tetrahedral A and octahedral B sites, is a paradigmatic class of catalysts with several possible geometric configurations and numerous applications, including polysulfide conversion in metal-sulfur batteries. Nonetheless, the influence of the geometric configuration and composition on the mechanisms of catalysis and the precise manner in which spinel catalysts facilitate the conversion of polysulfides remain unknown. To enable controlled exposure of single active configurations, herein, Co and Co in CoO catalysts for sodium polysulfide conversion are in large part replaced by Fe and Fe, respectively, generating FeCoO and CoFeO.

A Layered Bi Te @PPy Cathode for Aqueous Zinc-Ion Batteries: Mechanism and Application in Printed Flexible Batteries.

Low-cost, safe, and environmental-friendly rechargeable aqueous zinc-ion batteries (ZIBs) are promising as next-generation energy storage devices for wearable electronics among other applications. However, sluggish ionic transport kinetics and the unstable electrode structure during ionic insertion/extraction hamper their deployment. Herein, a new cathode material based on a layered metal chalcogenide (LMC), bismuth telluride (Bi Te ), coated with polypyrrole (PPy) is proposed.

A 3d-4d-5d High Entropy Alloy as a Bifunctional Oxygen Catalyst for Robust Aqueous Zinc-Air Batteries.

High entropy alloys (HEAs) are highly suitable candidate catalysts for oxygen evolution and reduction reactions (OER/ORR) as they offer numerous parameters for optimizing the electronic structure and catalytic sites. Herein, FeCoNiMoW HEA nanoparticles are synthesized using a solution-based low-temperature approach. Such FeCoNiMoW nanoparticles show high entropy properties, subtle lattice distortions, and modulated electronic structure, leading to superior OER performance with an overpotential of 233 mV at 10 mA cm and 276 mV at 100 mA cm .

MoS @Polyaniline for Aqueous Ammonium-Ion Supercapacitors.

Ammonium-ion aqueous supercapacitors are raising notable attention owing to their cost, safety, and environmental advantages, but the development of optimized electrode materials for ammonium-ion storage still lacks behind expectations. To overcome current challenges, here, a sulfide-based composite electrode based on MoS and polyaniline (MoS @PANI) is proposed as an ammonium-ion host. The optimized composite possesses specific capacitances above 450 F g at 1 A g , and 86.