25.71 %-Efficiency FACsPbI Perovskite Solar Cells Enabled by A Thiourea-based Isomer.

Various isomers have been developed to regulate the morphology and reduce defects in state-of-the-art perovskite solar cells (PSCs). To insight the structure-function-effect correlations for the isomerization of thiourea derivatives on the performance of the PSCs, we developed two thiourea derivatives [(3,5-dichlorophenyl)amino]thiourea (AT) and N-(3,5-dichlorophenyl)hydrazinecarbothioamide (HB). Supported by experimental and calculated results, it was found that AT can bind with undercoordinated Pb defect through synergistic interaction between N1 and C=S group with a defect formation energy of 1.

The Influence of Al and Nb on the Low Oxygen Pressure Pre-Oxidation Behavior of Fe-35Ni-20Cr-xAl-yNb Alloys at 1000 °C.

To investigate the impact of Al and Nb elements on the formation of a protective oxide layer on the surface of Fe-35Ni-20Cr-xAl-yNb (x = 0, 2, 4, 6 wt.%; y = 0, 1, 2 wt.%) alloys, their oxidation behavior was examined at 1000 °C, 10 atm.

(SbLi)TiO-Doping Effect and Sintering Condition Tailoring in BaTiO-Based Ceramics.

(1-x)(BaSrBi)(TiZr)O-x(SbLi)TiO (abbreviated as BSBiTZ-xSLT, x = 0.025, 0.05, 0.

Free-standing ultrathin silicon wafers and solar cells through edges reinforcement.

Crystalline silicon solar cells with regular rigidity characteristics dominate the photovoltaic market, while lightweight and flexible thin crystalline silicon solar cells with significant market potential have not yet been widely developed. This is mainly caused by the brittleness of silicon wafers and the lack of a solution that can well address the high breakage rate during thin solar cells fabrication. Here, we present a thin silicon with reinforced ring (TSRR) structure, which is successfully used to prepare free-standing 4.

A carboxylate linker strategy mediated densely accessible Fe-N sites for enhancing oxygen electroreduction in Zn-air batteries.

Iron-nitrogen-carbon single-atom catalysts derived from zeolitic-imidazolate-framework-8 (ZIF-8) have presented its great potential for the oxygen reduction reaction (ORR) in Zn-air batteries (ZABs). However, due to insufficient active Fe-N sites, its ORR activity is inferior to Pt-based catalysts. Herein, a carboxylate (OAc) linker strategy is proposed to design a ZIF-8-derived FeNCOAc catalyst with abundant accessible Fe-N single-atom sites.

Lead-Free Perovskite Single Crystal Linear Array Detector for High-Resolution X-Ray Imaging.

0D Bi-based 329-type halide perovskite is demonstrated as a promising semiconductor for X-ray detection due to its strong X-ray absorption, superior stability, availability of large single crystals (SCs) and solution processibility at low temperature. However, its low mobility-lifetime product (µτ) limits its further improvement in detection sensitivity. Based on the first-principles calculations, this work designs a new 2D Bi-based 329-type halide perovskite using a mixed-halide-induced structural dimension regulation strategy.

In Situ Synthesized Low-Dimensional Perovskite for >25% Efficiency Stable MA-Free Perovskite Solar Cells.

Developing an additive to effectively regulate the perovskite crystallization kinetics for the optimized optoelectronic properties of perovskite film plays a vital role in obtaining high efficiency and stable perovskite solar cells (PSCs). Herein, a new additive is designed and directly synthesized in perovskite precursor solution by utilizing an addition reaction between but-3-yn-1-amine hydrochloride (BAH) and formamidinium iodide. It is found that its product may control the intermediate precursor phase for regulating perovskite nucleation, leading to advantageous 2D perovskite to induce growth of perovskite along the preferred [001] orientation with not only released lattice strain but also strong interaction with perovskite to passivate its surface defects.

Impact of length of branched alkyl side chains on thiazolothiazole-based small molecular acceptors in non-fullerene polymer solar cells.

It has been reported that the length of branched alkyl side chains on fused-ring electron acceptors confers different impacts on properties solubility of BJH blends. However, because this impact on a non-fused acceptor backbone has rarely been studied, we examined the impact of molecular optimization from alkyl chain tuning based on non-fused thiazolothiazole small-molecule acceptors. The length of the side chain on the thiophene bridge was modified from 2-butyloctyl to 2-ethylhexyl, which corresponds to small molecules TTz3(C4C6) and TTz3(C2C4), respectively.

Morphological control and performance engineering of Co-based materials for supercapacitors.

As one of the most promising energy storage devices, supercapacitors exhibit a higher power density than batteries. However, its low energy density usually requires high-performance electrode materials. Although the RuO material shows desirable properties, its high cost and toxicity significantly limit its application in supercapacitors.

A chiral bipolar host for efficient solution-processed circularly polarized OLEDs a chirality energy transfer process.

Chiral bipolar hosts of (/)-L-2mCPCN are synthesized, which show high singlet/triplet energy levels and clear circularly polarized luminescence. Employing racemic phosphorescent and TADF materials as emitting guest molecules, solution-processable CP-OLEDs based on such chiral hosts are obtained with an EQE of 10.7% and || values of 5.

Performance of Large Area n-TOPCon Solar Cells with Selective Poly-Si Based Passivating Contacts Prepared by PECVD Method.

Selective emitter (SE) technology significantly influences the passivation and contact properties of n-TOPCon solar cells. In this study, three mask layers (SiO, SiN, and SiON) were employed to fabricate n-TOPCon solar cells with phosphorus (P)-SE structures on the rear side using a three-step method. Additionally, phosphosilicon glass (PSG) was used to prepare n-TOPCon solar cells with P-SE structure on the rear side using four-step method, and the comparative analysis of electrical properties were studied.

HLCT-Type Acceptor Molecule-Based Exciplex System for Highly Efficient Solution-Processable OLEDs with Suppressed Efficiency Roll-Offs.

Exciplex systems are promising candidates for thermally activated delayed fluorescence (TADF) molecules because of the small energy difference between the lowest singlet and triplet excited states (ΔE). However, realizing high-efficiency and low-external-quantum-efficiency (EQE) roll-off in solution-processed organic light-emitting diodes (OLEDs) using an exciplex system remains a formidable challenge. In this study, two (HLCT)-type isomers with a spiro skeleton, 2-BuspoCz-TRZ and 10-BuspoCz-TRZ, are designed and synthesized as acceptors of exciplexes, where tert-butylspirofluorene indole is regarded as a donor and the triazine unit as an acceptor.

Hybridized local and charge transfer dendrimers with near-unity exciton utilization for enabling high-efficiency solution-processed hyperfluorescent OLEDs.

Achieving both high emission efficiency and exciton utilization efficiency () in hot exciton materials is still a formidable task. Herein, a proof-of-concept design for improving in hot exciton materials is proposed elaborate regulation of singlet-triplet energy difference, leading to an additional thermally activated delayed fluorescence (TADF) process. Two novel dendrimers, named D-TTT-H and D-TTT-Bu, were prepared and characterized, in which diphenylamine derivatives were used as a donor moiety and tri(triazolo)triazine (TTT) as an acceptor fragment.

Liquid-crystalline circularly polarised fluorescent emitters with a high luminescence dissymmetry factor.

Chiral liquid-crystalline emitters based on 9,9-dimethyl-10-(4-(phenylsulfonyl)phenyl)-9,10-dihydroacridine and a functionalised binaphthol show smectic liquid crystal phases and circularly polarised blue fluorescence with a high luminescence dissymmetry factor || of 0.13. Solution-processable organic light-emitting diodes (OLEDs) based on the enantiomers were explored.

Liquid-crystalline circularly polarised TADF emitters for high-efficiency, solution-processable organic light-emitting diodes.

Achieving a high emission efficiency and a large luminescence asymmetry factor () in a single molecule exhibiting circularly polarised thermally activated delayed fluorescence (CP-TADF) remains a formidable challenge. In this work, a proof-of-concept, liquid-crystalline CP-TADF molecule is proposed to realise high by taking advantage of the order inherent in liquid crystals. Employing a chiral dinaphthol-based CP-TADF molecule as the emissive unit, a pair of liquid-crystalline CP-TADF molecules (R/S-4) is synthesised the introduction of six mesogenic moieties.

Defect Synergistic Regulations of Li&Na Co-Doped Flexible Cu ZnSn(S,Se) Solar Cells Achieving over 10% Certified Efficiency.

Ion doping is an effective strategy for achieving high-performance flexible Cu ZnSn(S,Se) (CZTSSe) solar cells by defect regulations. Here, a Li&Na co-doped strategy is applied to synergistically regulate defects in CZTSSe bulks. The quality absorbers with the uniformly distributed Li and Na elements are obtained using the solution method, where the acetates (LiAc and NaAc) are as additives.

Au Nanocluster Assisted Microstructural Reconstruction for Buried Interface Healing for Enhanced Perovskite Solar Cell Performance.

The heterogeneity of perovskite film crystallization along the vertical direction leads to voids and traps at the buried interfaces, hampering both efficiency and stability of perovskite solar cells. Here, bovine serum albumin-functionalized Au nanoclusters (ABSA), combined with heavy gravity, high surface charge density, and strong interactions with the electron transport layer, are designed to reconstruct the buried interfaces for not only high-quality crystallization, but also improved carrier transfer. The ABSA macromolecules with amine function groups and larger surface charge density interact with the perovskite to improve the crystallinity, and gradually migrate towards the buried interface, healing the defective voids, hence suppressing surface recombination velocity from 3075 to 452 cm s .

Multifunctional Characteristics of BCTH:0.5% Sm Ceramics Prepared via Hydrothermal Method and Powder Injection Molding.

Briefly, 0.005-mol Sm-doped (BaCa)(TiHf)O ([(BaCa)Sm](TiHf)O, BCTH:0.005Sm) lead-free ceramics were prepared via hydrothermal method and powder injection molding using paraffin and oleic acid as binders, and the effects of preparation method and sintering conditions on microstructure, dielectric behavior and optical properties were investigated.

Synergistic Interfacial Engineering of Heterostructured Cobalt Phosphide Spheres/Cobalt Hydroxide Nanosheets for Overall Water Splitting.

Recently, transition metal phosphides (TMPs) have been widely explored for the hydrogen evolution reaction (HER) due to their advantaged activity. Nevertheless, the OER performance of TMPs in an alkaline medium is still unsatisfactory. Therefore, interfacial engineering of TMPs to enhance the OER performance is highly desirable.

Synergistic Effect of Strontium and Melt Quenching on the Solidification Microstructure of Hypereutectic Al-Si Alloys.

The synergistic effect between strontium (Sr) and melt quenching on the solidified microstructure of hypereutectic Al-Si alloys was investigated by optical and scanning electron microscopy. The results indicate that melt quenching can suppress the growth of primary Si particles in the solidified structure of the hypereutectic Al-Si alloy, resulting in a significant decrease of in the average size of primary Si particles in Al-(18~22)Si alloys from 30.35~66.

Preparation of Bamboo-Based Activated Carbon via Steam Activation for Efficient Methylene Blue Dye Adsorption: Modeling and Mechanism Studies.

Dye pollution has long been an ecological and human health issue. Activated carbon is considered to be the most promising material for dye adsorption. In this study, bamboo was used as a biomass precursor to produce activated carbon with a high specific surface area by the steam activation method.