Ordering Bimetallic Cu-Pd Catalysts onto Orderly Mesoporous SrTiO-Crystal Nanotubular Networks for Efficient Carbon Dioxide Photoreduction.

Artificial photosynthesis of fuels has garnered significant attention, with SrTiO emerging as a potential candidate for photocatalysis due to its exceptional physicochemical properties. However, selectively converting CO into fuels with desired reaction products remains a grand challenge. Herein, we design an updated method via an aging strategy based on the electrospinning technique to synthesize a single-crystalline Al-doped SrTiO nanotubular networks with self-assembled orderly mesopores, further modified by Cu-Pd alloy.

Triune Nanomodulator Enables Exhausted Cytotoxic T Lymphocyte Rejuvenation for Cancer Epigenetic Immunotherapy.

Oncogene activation and epigenome dysregulation drive tumor initiation and progression, contributing to tumor immune evasion and compromising the clinical response to immunotherapy. Epigenetic immunotherapy represents a promising paradigm in conquering cancer immunosuppression, whereas few relevant drug combination and delivery strategies emerge in the clinic. This study presents a well-designed triune nanomodulator, termed ROCA, which demonstrates robust capabilities in tumor epigenetic modulation and immune microenvironment reprogramming for cancer epigenetic immunotherapy.

Construction of a Robust Radiative Cooling Emitter for Efficient Food Storage and Transportation.

Nowadays, food safety is still facing great challenges. During storage and transportation, perishable goods have to be kept at a low temperature. However, the current logistics still lack enough preservation ability to maintain a low temperature in the whole.

Efficient liquid phase photothermal catalysis realized by AgO/BiOI heat-localization in a microreactor.

By constructing a AgO/BiOI p-n heterojunction and applying a heat-localization microreactor, efficient photocatalysis enhanced by both photoinduced carrier separation and the photothermal effect was realized. This work focuses on the utilization of near-infrared light to broaden the absorption spectrum and accelerate the transportation of carriers. Through the production and localization of heat, it provides a novel thought for full-spectrum photocatalysis.

Use of Ball Drop Casting and Surface Modification for the Development of Amine-Functionalized Silica Aerogel Globules for Dynamic and Efficient Direct Air Capture.

Amine-functionalized silica aerogel globules (AFSAGs) were first synthesized via a simple ball drop casting method followed by amine grafting. The effect of grafting time on the structure and CO adsorption performance of the AFSAGs was investigated. The CO adsorption performance was comprehensively studied by breakthrough curves, adsorption capacity and rates, surface amine loading and density, amine efficiency, adsorption halftime, and cyclic stability.

Salt-Supported Nickel Oxides for Boosted Hydrogen Production: The Critical Role of Halogen.

Hydrogen production from organic waste by gasification and reforming technologies offers major benefits to both the environment and climate. The long-term stability and regeneration of the reforming catalyst are still the biggest challenges because of carbon deposition. Here we report a recyclable salt-supported nickel oxide NiO/NaX (X: F, Cl, Br) catalyst for effective autothermal reforming of the oxygenated volatile organic compound (OVOC) ethyl acetate to hydrogen.

Highly sensitive fluorescent explosives detection SERS: based on fluorescence quenching of graphene oxide@Ag composite aerogels.

High fluorescence background poses a substantial challenge to surface-enhanced Raman scattering (SERS), thereby limiting its broader applicability across diverse domains. In this work, silver nanoparticle (Ag NP)-loaded graphene oxide aerogel nanomaterials (GO-Ag ANM) were prepared for sensitive SERS detection of fluorescent explosive 2,4,8,10-tetranitrobenzo-1,3,6,6-tetraazapentaenopyridine (BPTAP) by a fluorescence quenching strategy. By harnessing the fluorescence quenching properties of graphene and the localized surface plasmon resonance of silver nanoparticles, the synthesized aerogels exhibited effective fluorescence quenching and Raman enhancement capabilities when employed for BPTAP analysis with 532 nm laser excitation.

Elevating the Photocatalytic Performance of BiOCl by Promoting Light Utilization: From Co doping to the Microreactor.

Owing to its unique layered structure, BiOCl demonstrates high photocatalytic activity. However, its wide bandgap hinders the absorption of visible light. Doping modification is an effective method to expand the light absorption edge of photocatalysts by creating a doping energy level within the bandgap.

The 3D Printing of Novel Honeycomb-Hollow Pyramid Sandwich Structures for Microwave and Mechanical Energy Absorption.

Honeycomb sandwich (HS) structures are important lightweight and load-bearing materials used in the aerospace industry. In this study, novel honeycomb-hollow pyramid sandwich (HPS) structures were manufactured with the help of fused deposition modeling techniques using PLA and PLA/CNT filaments. The microwave and mechanical energy absorption properties of the HPS structures with different geometry parameters were studied.

Modulating Electronic Structure and Atomic Insights into the Novel Hierarchically Porous PdCuFe Trimetallic Alloy Aerogel for Efficient Oxygen Reduction.

The high cost of noble Pd/Pt required for the oxygen reduction reaction (ORR) in the cathode restricts the wide applications of fuel cells. In this study, the synthesis of a novel PdCuFe aerogel electrocatalyst is successfully demonstrated using self-assembly and lyophilization techniques, employing a mild reducing agent. The resulting aerogel electrocatalyst exhibits a distinctive 3D network structure, possessing a substantial BET-specific surface area of 75.

Customizing biomimetic surface attributes of dendritic lipopeptide nanoplatforms for extended circulation.

The pressing demand for innovative approaches to create delivery systems with heightened drug loading and prolonged circulation has spurred numerous efforts, yielding some successes but accompanied by constraints. Our study proposes employing dendritic lipopeptide with precisely balanced opposing charges to extend blood residency for biomimetic nanoplatforms. Neutrally mixed-charged zwitterionic nanoparticles (NNPs) achieved a notable 19 % simvastatin loading content and kept stable even after one-month storage at 4 °C.

Nature-Inspired Scarless Healing: Guiding Biomaterials Design for Advanced Therapies.

The use of biomaterials in the treatment of skin wounds has been steadily increasing over the last two decades. The key to the successful application of biomaterials in scar reduction is the up-to-date knowledge of the actors involved in accelerated healing and the cellular factors that can be implemented in bioinspired materials. Natural models of scarless healing such as oral mucosa, fetal skin and the skin of amphibians, fish, and reptiles are a great source of information.

Facile Preparation of a Novel HfC Aerogel with Low Thermal Conductivity and Excellent Mechanical Properties.

Aerogels emerge as captivating contenders within the realm of high-temperature thermal resistance and thermal insulation. Nevertheless, their practical applications are usually constrained by their inherent brittleness when subjected to rigorous conditions. Herein, employing hafnium dichloride oxide octahydrate (HfOCl·8HO) as the hafnium source and resorcinol-formaldehyde (RF) as the carbon precursor, hafnium carbide (HfC) aerogels are fabricated via the sol-gel method complemented with carbothermal reduction reaction.

construction of N-doped TiCTconfined worm-like FeOnanoparticles by Fe-O-Ti bonding for LIBs anode with superior cycle performance.

The development of FeOas lithium-ion batteries (LIBs) anode is greatly restricted by its poor electronic conductivity and structural stability. To solve these issues, this work presentsconstruction of three-dimensional crumpled FeO@N-TiCTcomposite by solvothermal-freeze-drying process, in which wormlike FeOnanoparticles (10-50 nm)nucleated and grew on the surface of N-doped TiCTnanosheets with Fe-O-Ti bonding. As a conductive matrix, N-doping endows TiCTwith more active sites and higher electron transfer efficiency.

Facile Synthesis of Polymer-Reinforced Silica Aerogel Microspheres as Robust, Hydrophobic and Recyclable Sorbents for Oil Removal from Water.

With the rapid development of industry and the acceleration of urbanization, oil pollution has caused serious damage to water, and its treatment has always been a research hotspot. Compared with traditional adsorption materials, aerogel has the advantages of light weight, large adsorption capacity and high selective adsorption, features that render it ideal as a high-performance sorbent for water treatment. The objective of this research was to develop novel hydrophobic polymer-reinforced silica aerogel microspheres (RSAMs) with water glass as the precursor, aminopropyltriethoxysilane as the modifier, and styrene as the crosslinker for oil removal from water.

Asymmetric Plasmonic Moth-Eye Nanoarrays with Side Opening for Broadband Incident-Angle-Insensitive Antireflection and Absorption.

Plasmonic absorbers with broadband angle-insensitive antireflection have attracted intense interests because of its wide applications in optical devices. Hybrid surfaces with multiple different sub-wavelength array units can provide broadened antireflection, while many of these antireflective surfaces only work for specific angles and require high complexity of nanofabrication. Here, a plasmonic asymmetric nanostructure composed of the moth-eye dielectric nanoarray partially modified with the top Ag nanoshell providing a side opening for broadband incident-angle-insensitive antireflection and absorption, is rationally designed by nanoimprinting lithography and oblique angle deposition.

A novel magnetic FeO/cellulose nanofiber/polyethyleneimine/thiol-modified montmorillonite aerogel for efficient removal of heavy metal ions: Adsorption behavior and mechanism study.

To efficiently remove heavy metals from wastewater, designing an adsorbent with high adsorption capacity and ease of recovery is necessary. This paper presents a novel magnetic hybridized aerogel, FeO/cellulose nanofiber/polyethyleneimine/thiol-modified montmorillonite (FeO/CNF/PEI/SHMMT), and explores its adsorption performance and mechanism for Pb, Cu, and Cd in aqueous solutions. The hybrid aerogel has a slit-like porous structure and numerous exposed active sites, which facilitates the uptake of metal ions by adsorption.

Dendritic polymer-functionalized nanomedicine potentiates immunotherapy via lethal energy crisis-induced PD-L1 degradation.

The advent of immune checkpoint inhibitors ushers in a new era of anti-tumor immunity. However, current clinical anti-PD-L1 antibodies only interdict PD-L1 on the membrane, which cannot diminish the complex cancer-promoting effects of intracellular PD-L1. Therefore, directly reducing the PD-L1 abundance of cancer cells might be a potential PD-L1 inhibitory strategy to circumvent the issues of current anti-PD-L1 antibodies.

Infrared light induced sustainable enhancement of photocatalytic efficiency by thermoelectric effect.

Hindering the recombination of photoinduced electron-hole pairs is of significance for enhancing photocatalytic performance. Applying a voltage to separate carriers offers an option to realize it. Thermoelectric materials own the ability to continuously sustain a voltage when a temperature difference exists between its two sides.

Peptide-dendrimer-reinforced bioinks for 3D bioprinting of heterogeneous and biomimetic in vitro models.

Despite 3D bioprinting having emerged as an advanced method for fabricating complex in vitro models, developing suitable bioinks that fulfill the opposing requirements for the biofabrication window still remains challenging. Although naturally derived hydrogels can better mimic the extracellular matrix (ECM) of numerous tissues, their weak mechanical properties usually result in architecturally simple shapes and patchy functions of in vitro models. Here, this limitation is addressed by a peptide-dendrimer-reinforced bioink (HC-PDN) which contained the peptide-dendrimer branched PEG with end-grafted norbornene (PDN) and the cysteamine-modified HA (HC).

Engineered Hierarchical Microdevices Enable Pre-Programmed Controlled Release for Postsurgical and Unresectable Cancer Treatment.

Drug treatment is required for both resectable and unresectable cancers to strive for any meaningful improvement in patient outcomes. However, the clinical benefit of receiving conventional systemic administrations is often less than satisfactory. Drug delivery systems are preferable substitutes but still fail to meet diverse clinical demands due to the difficulty in programming drug release profiles.

Decoding the Atomic-Scale Structural Origin of Large Strain Performance in BNT-6BT Based Relaxor Ferroelectrics.

The relationship between matter properties and their atomic-scale structures is a challenging investigation. For relaxor ferroelectrics, correlating the relaxor mechanisms on the atomic scale to properties is still ambiguous. Here, the correlation between the atomic-scale structure and strain performance of 0.

A facile bioorthogonal chemistry-based reversible to irreversible strategy to surmount the dilemma between injectability and stability of hyaluronic acid hydrogels.

Injectable and stable hydrogels have great promise for clinical applications. Fine-tuning the injectability and the stability of the hydrogels at different stages has been challenging due to the limited number of coupling reactions. A distinct "reversible to irreversible" concept using a thiazolidine-based bioorthogonal reaction between 1,2-aminothiols and aldehydes in physiological conditions to surmount the dilemma between injectability and stability is presented for the first time.

Photo-crosslinkable hyaluronic acid microgels with reactive oxygen species scavenging capacity for mesenchymal stem cell encapsulation.

Mesenchymal stem cells (MSCs) have gained increasing attention in various biomedical applications. However, conventional therapeutic approaches, such as direct intravenous injection, are associated with low cell survival due to the shear force during injection and the oxidative stress microenvironments in the lesion area. Herein, a photo-crosslinkable antioxidant hydrogel based on tyramine- and dopamine-modified hyaluronic acid (HA-Tyr/HA-DA) was developed.