Terminations Determine Energy-Level Alignment of Perovskite Buried Interfaces.

The "substrate-effect", where the semiconduction type of perovskite changes according to that of the substrate is a widely-reported, but so far not fully understood phenomenon in the field of perovskite. The main challenge lies in the difficulty of probing and comprehending the electronic properties of perovskite buried interfaces. Here, through broadly investigating 20 buried interfaces formed between different perovskites and organic hole or electron transport materials (HTMs or ETMs), it is revealed that the substrate-effect originates from the distinct energy-level alignments at HTM or ETM substrates.

Bulk Charge Recombination Reduction Enabled High Spectral Resolution Perovskite Gamma-Ray Spectrometer.

Solution-grown metal halide perovskite single crystals have been demonstrated as potential gamma-ray spectrometer. However, the energy resolution of the solution-grown formamidinum lead bromide (FAPbBr) single crystal spectrometer still suffers from strong bulk charge recombination. Here, it is identified that the high bulk charge recombination arises from a gradient Type-I band distribution throughout the crystal.

The value of GULP1 in cancer prognosis and immunotherapy, validated from pan-cancer analysis to pancreatic cancer.

GULP PTB domain containing engulfment adaptor 1 (GULP1) protein is involved in regulating biological processes such as endocytosis and apoptosis. The function of GULP1 in cancer, however, has been the subject of fewer studies; its importance as a potential prognostic factor in pancreatic cancer is still uncertain. Thus, the purpose of this work was to investigate GULP1's immunologic and oncogenic activities in a range of malignancies, as well as any potential relevance to pancreatic cancer.

Tuning the Crystallization and Photothermal Aging Chemistry of CsPbSnI for Inorganic Perovskite Tandem Photovoltaics.

The poor performance of inorganic narrow bandgap perovskite solar cells (PSCs) hinders the development of inorganic perovskite tandem solar cells (IPTSCs). We modulate the crystallization and photothermal aging chemistry for CsPbSnI (1.31 eV) with guanidinoacetic acid (GCA) to develop IPTSC.

Buried Interface Regulation with a Supramolecular Assembled Template Enables High-Performance Perovskite Solar Cells for Minimizing the V Deficit.

Despite the rapid development of perovskite solar cells (PSCs) in the past decade, the open-circuit voltage (V) of PSCs still lags behind the theoretical Shockley-Queisser limit. Energy-level mismatch and unwanted nonradiative recombination at key interfaces are the main factors detrimental to V. Herein, a perovskite crystallization-driven template is constructed at the SnO/perovskite buried interface through a self-assembled amphiphilic phosphonate derivative.

Durable all-inorganic perovskite tandem photovoltaics.

All-inorganic perovskites prepared by substituting the organic cations (for example, methylammonium and formamidinium) with inorganic cations (for example, Cs) are effective concepts to enhance the long-term photostability and thermal stability of perovskite solar cells (PSCs). Hence, inorganic perovskite tandem solar cells (IPTSCs) are promising candidates for breaking the efficiency bottleneck and addressing the stability issue, too. However, challenges remain in fabricating two-terminal (2T) IPTSCs due to the inferior film formation and deep trap states induced by tin cations.

Regulating Surface-Passivator Binding Priority for Efficient Perovskite Light-Emitting Diodes.

Suppressing trap-assisted nonradiative losses through passivators is a prerequisite for efficient perovskite light-emitting diodes (PeLEDs). However, the complex bonding between passivators and perovskites severely suppresses the passivation process, which still lacks comprehensive understanding. Herein, the number, category, and degree of bonds between different functional groups and the perovskite are quantitatively assessed to study the passivation dynamics.

Charge Injection and Auger Recombination Modulation for Efficient and Stable Quasi-2D Perovskite Light-Emitting Diodes.

The inefficient charge transport and large exciton binding energy of quasi-2D perovskites pose challenges to the emission efficiency and roll-off issues for perovskite light-emitting diodes (PeLEDs) despite excellent stability compared to 3D counterparts. Herein, alkyldiammonium cations with different molecular sizes, namely 1,4-butanediamine (BDA), 1,6-hexanediamine (HDA) and 1,8-octanediamine (ODA), are employed into quasi-2D perovskites, to simultaneously modulate the injection efficiency and recombination dynamics. The size increase of the bulky cation leads to increased excitonic recombination and also larger Auger recombination rate.

Comprehensive analysis of the potential biological significance of cuproptosis-related gene LIPT2 in pan-cancer prognosis and immunotherapy.

Lipoyltransferase 2 (LIPT2) acts as a key enzyme involved in fatty acid metabolism and cell membrane synthesis. However, the biological function of LIPT2 in various cancer types and its potential significance in prognosis continue to be unresolved. For this analysis, we evaluated the expression levels and the significance of prognosis of LIPT2 gene in all cancers by various bioinformatics methods.

Correlating Young's Modulus with High Thermal Conductivity in Organic Conjugated Small Molecules.

Attaining elevated thermal conductivity in organic materials stands as a coveted objective, particularly within electronic packaging, thermal interface materials, and organic matrix heat exchangers. These applications have reignited interest in researching thermally conductive organic materials. The understanding of thermal transport mechanisms in these organic materials is currently constrained.

Fostering the Dense Packing of Halide Perovskite Quantum Dots through Binary-Disperse Mixing.

Due to their versatile applications, perovskite quantum dot (PQD)-based optoelectrical devices have garnered significant research attention. However, the fundamental packing behavior of PQDs in thin films and its impact on the device performance remain relatively unexplored. Drawing inspiration from theoretical models concerning packing density with size mixtures, this study presents an effective strategy, namely, binary-disperse mixing, aimed at enhancing the packing density of PQD films.

Controllable Black-to-Yellow Phase Transition by Tuning the Lattice Symmetry in Perovskite Quantum Dots.

The black-to-yellow phase transition in perovskite quantum dots (QDs) is more complex than in bulk perovskites, regarding the role of surface energy. Here, with the assistance of in situ grazing-incidence wide-angle and small-angle X-ray scattering (GIWAXS/GISAXS), distinct phase behaviors of cesium lead iodide (CsPbI ) QD films under two different temperature profiles-instant heating-up (IHU) and slow heating-up (SHU) is investigated. The IHU process can cause the phase transition from black phase to yellow phase, while under the SHU process, the majority remains in black phase.

Dicyandiamide-assisted synthesis of N-doped porous CoMn-Nx@N-C carbon nanotube composites MOFs as efficient trifunctional electrocatalysts in the same electrolyte.

The development of low-cost, long-term stability, and good oxygen reversible catalytic reaction (ORR/OER) and hydrogen evolution (HER) activity under the same electrolyte concentration of electrocatalytic materials has an important role in the construction of large-scale applications and more valuable sustainable energy systems. Among them, the representative CoMn-Nx@N-C-900-0.2 showed good ORR/OER/HER catalytic activity in 0.

The Comparison of Clinical Efficacy of Minimally Invasive Tarsal Sinus Approach and L-Type Incision Approach Combined with 3D Printing Technology in Calcaneal Fracture.

Purpose: To explore the comparison of the reduction of the subtalar articular surface and other postoperative effects of the minimally invasive tarsal sinus approach and lateral L-shaped incision conventional approach for the treatment of calcaneal fracture with 3D printing technology.

Methods: Patients who received surgical treatment for calcaneal fractures in the First Affiliated Hospital of Henan University of Science and Technology from June 2019 to December 2020 were collected. 3D printing equipment produced the affected side reduction heel bone fracture model and navigation template model.

Porous MoWN/MoWC@NC Nano-octahedrons synthesized via confined carburization and vapor deposition in MOFs as efficient trifunctional electrocatalysts for oxygen reversible catalysis and hydrogen production in the same electrolyte.

We used a simple MOFs-assisted synthesis strategy based on the encapsulation and in-situ carburizing reaction of Cu-based metallic organic frameworks (NENU-5) to synthesize porous nano-octahedral materials, MoWN/MoWC@NCTs (T = 700, 800, and 900). Together with the vapor deposition strategy, the volatile nitrogen species from the pyrolysis of dicyandiamide were captured by the nano-octahedral materials, and formed tungsten-molybdenum-based carbonitride nanocrystals encapsulated in nitrogen-doped carbon. The porous nano-octahedron has a unique heterostructure composed of MoN/MoC/WN/WC.

Bamboo-like nitrogen-doped porous carbon nanofibers encapsulated nickel-cobalt alloy nanoparticles composite material derived from the electrospun fiber of a bimetal-organic framework as efficient bifunctional oxygen electrocatalysts.

The development of low-cost bifunctional electrocatalysts with both a high activity and long durability is critical for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The reasonable design and construction of bifunctional electrocatalysts is the key to energy storage and energy conversion technologies. In this study, transition metal carbon nitrides were used as a substitute for the precious metal catalyst, the Ni-Co-BTC (metal organic framework (MOF)) mixed with polyacrylonitrile (PAN) using electrostatic spinning technology to prepare the bamboo-like nanofibers precursor (Ni-Co-BTC@PAN).

n-Type Doping of SbS Light-Harvesting Films Enabling High-Efficiency Planar Heterojunction Solar Cells.

SbS is a kind of new light-absorbing material possessing high stability in ambient environment, high absorption coefficient in the visible range, and abundant elemental storage. To improve the power conversion efficiency of SbS-based solar cells, here we control the defect in SbS absorber films. It is found that the increase of sulfur vacancy is able to upgrade photovoltaic properties.

GCPred: a web tool for guanylyl cyclase functional centre prediction from amino acid sequence.

Summary: GCPred is a webserver for the prediction of guanylyl cyclase (GC) functional centres from amino acid sequence. GCs are enzymes that generate the signalling molecule cyclic guanosine 3', 5'-monophosphate from guanosine-5'-triphosphate. A novel class of GC centres (GCCs) has been identified in complex plant proteins.