Kinetic Mechanism and Structural Design of Thick Electrodes in Lithium-Ion Batteries: Challenges and Optimization Strategies.

Thick electrode is a critical strategy to increase the energy density of lithium-ion batteries(LiBs) by maximizing the active material loading. However, their practical application is obstructed by kinetic limitations, including low charge transfer efficiency and poor mechanical stability, which severely decrease rate capability, cycling performance, and safety. This review focuses on an intensive analysis of the problems with thick electrodes in terms of ion transfer kinetics, electron transfer discontinuities, and poor mechanical stability.

Tailored Heterogeneous Interphase Layer Promotes Low-Temperature Desolvation Toward Durable Sodium Metal Batteries.

Sodium metal batteries (SMBs) represent a promising next-generation energy storage technology due to their low cost and high energy density. However, SMBs face significant challenges, including interfacial instability and the growth of sodium dendrites on the metal anode, particularly at low temperatures (LTs). Poor ion desolvation at LTs further exacerbates these issues, severely compromising battery performance.

Simultaneous Effects of C-N-V Bonds and Multiple Sulfides Anchoring Active V and Na Enables Honeycomb-Like Porous NaV(PO) with Non-Attenuation Characteristics for Na-Ion Batteries.

For NaV(PO) (NVP) cathode, the activity and utilization rate of Na and V is the key to affecting its electrochemical properties. However, few studies can simultaneously optimize both. Currently, a facile hydrothermal route is proposed to successfully synthesize the honeycomb-like porous NVP@CHSLS cathodes possessing anchoring effects to enhance the immobilization of active Na/V through in situ carbonation with chitosan and sodium lignosulfonate.

Efficiently Degrading RhB Using Bimetallic CoO/ZnO Oxides: Ultra-Fast and Persistent Activation of Permonosulfate.

To address the issues of poor Co regeneration and limited interfacial electron transfer in heterogeneous catalytic systems, this study proposes the synthesis of highly efficient and stable CoO/ZnO composites through the pyrolysis-oxidation reaction of Co/Zn MOFs for the degradation of rhodamine B (RhB) using activated peroxymonosulfate (PMS). The results confirmed that the catalyst exhibited a high electron transfer capacity, and the synergistic effect between the bimetals enhanced the reversible redox cycle of Co/Co. Under optimal conditions, complete removal of RhB was achieved in just 6 min using the CoO/ZnO composite, which demonstrated excellent stability after five cycles.

Digital SERS Nanostructured Platform for Amplification-free Single-Molecule DNA Detection and Pre-Symptomatic Diagnosis of Kiwifruit Soft Rot.

We present a digital surface-enhanced Raman spectroscopy (SERS) platform enabling enzyme- and amplification-free single-molecule DNA detection through Poisson distribution-driven quantification and geometrically optimized plasmonic nanostructures. Utilizing high-throughput UV lithography, we fabricated large-area nanopillar arrays (1.5 × 1.

Suppressed Degradation in Semiconducting Lithium-Rich Oxide Cathode Materials via Phase Structure Engineering.

Owing to anionic oxygen redox (O redox), cathode materials containing lithium-rich oxides (LROs) exhibit a large discharge capacity exceeding 300 mAh·g, in addition to a decent midpoint voltage (∼3.5 V). This makes them viable choices for the fabrication of cathode materials for future development of 500 Wh·kg lithium-ion batteries (LIBs).

Toward Rational Design of Carbon-Based Electrodes for High-Performance Supercapacitors.

Supercapacitors are electrical energy storage devices renowned for their high power density and long cycle life. However, their low energy density has limited their broader application, particularly in electric vehicles. Carbon nanomaterials, including carbon nanotubes and graphene, are among the most promising electrode materials for enhancing energy density due to their unique structures, excellent electrical, mechanical, and thermal properties, large specific surface area, and chemical inertness in both acidic and alkaline environments.

Initially anode-free sodium metal battery enabled by strain-engineered single-crystal aluminum substrate with (100)-preferred orientation.

Constructing high cycling stability and rate performance under limited or ideally zero sodium excess, namely initially anode-free design, which can obtain the ultimate energy density of sodium metal batteries, is highly desired yet remains challenging. Here, highly ordered and regularly arranged Al(100) single crystal current collector is constructed based on the grain boundary migration theory through a simple high-temperature calcination method, which eliminates the diffusion resistance of Na migration at grain boundaries, reduces the nucleation overpotential and interface diffusion energy barrier, increases the Na transfer rate, and exhibits uniform reversible sodium deposition capability. Profiting from the modified current collector surface, the Al(100) electrode can be cycled stably for 500 cycles with a Coulombic efficiency of 99.

Double Confinement Design to Access Highly Stable Intermetallic Nanoparticles for Fuel Cells.

Maintaining the stability of low Pt catalysts during prolonged operation of proton exchange membrane fuel cells (PEMFCs) remains a substantial challenge. Here, a double confinement design is presented to significantly improve the stability of intermetallic nanoparticles while maintaining their high catalytic activity toward PEMFCs. First, a carbon shell is coated on the surface of nanoparticles to form carbon confinement.

Advances on Defect Engineering of Niobium Pentoxide for Electrochemical Energy Storage.

The reasonable design of advanced anode materials for electrochemical energy storage (EES) devices is crucial in expediting the progress of renewable energy technologies. NbO has attracted increasing research attention as an anode candidate. Defect engineering is regarded as a feasible approach to modulate the local atomic configurations within NbO.

Identification of serum metabolite biomarkers in premature infants with bronchopulmonary dysplasia: protocol for a multicentre prospective observational cohort study.

Introduction: Bronchopulmonary dysplasia (BPD) is one of the most common and significant complications of preterm birth. It ultimately leads to a decrease in the quality of life for preterm infants and impacts their long-term health. Early prediction and timely intervention are crucial to halting the development of BPD.

Unraveling 3d Transition Metal (Ni, Co, Mn, Fe, Cr, V) Ions Migration in Layered Oxide Cathodes: A Pathway to Superior Li-Ion and Na-Ion Battery Cathodes.

Li-ion and Na-ion batteries are promising systems for powering electric vehicles and grid storage. Layered 3d transition metal oxides ATMO (A = Li, Na; TM = 3d transition metals; 0 < x ≤ 2) have drawn extensive attention as cathode materials due to their exceptional energy densities. However, they suffer from several technical challenges caused by crystal structure degradation associated with TM ions migration, such as poor cycling stability, inferior rate capability, significant voltage hysteresis, and serious voltage decay.

Exploring the potential association between serum selenium and hypertension in obese adult males in the United States.

Previous studies on the correlation between serum selenium and hypertension have yielded inconsistent results. Our previous analysis of participants from the National Health and Nutrition Examination Survey (NHANES) 2011-2018 indicated that elevated serum selenium concentrations were associated with an increased risk of metabolic abnormalities in obese individuals, with the primary effect being on blood pressure in males. The aim of this study was to further elucidate the relationship between serum selenium and the risk of hypertension in obese males.

Multifunctional High-Entropy Alloy Nanolayer Toward Long-Life Anode-Free Sodium Metal Battery.

Anode-free sodium metal batteries (AFSMBs) hold great promise due to high energy density and low cost. Unfortunately, their practical applications are hindered by poor cycling stability, which is attributed to Na dendrite growth and inferior Na plating/stripping reversibility on conventional sodiophobic current collectors. Here, a thin high-entropy alloy (HEA, NbMoTaWV) interfacial layer composed of densely packed nanoplates is constructed on commercial aluminum foil (NbMoTaWV@Al) for AFSMBs.

Sulfide electrolytes for all-solid-state sodium batteries: fundamentals and modification strategies.

Sulfide solid-state electrolytes (SSSEs) have garnered overwhelming attention as promising candidates for high-energy-density all-solid-state sodium batteries (ASSSBs) due to their high room-temperature ionic conductivity and excellent mechanical properties. However, the poor chemical/electrochemical stability, narrow electrochemical windows, and limited adaptability to cathodes/anodes of SSSEs hinder the performance and application of SSSEs in ASSSBs. Consequently, a comprehensive understanding of the preparation methods, fundamental properties, modification techniques, and compatibility strategies between SSSEs and electrodes is crucial for the advancement of SSSE-based ASSSBs.

NIR-II Image-Guided Wound Healing in Hypoxic Diabetic Foot Ulcers: The Potential of Ergothioneine-Luteolin-Chitin Hydrogels.

Hypoxic diabetic foot ulcers (HDFUs) pose a challenging chronic condition characterized by oxidative stress damage, bacterial infection, and persistent inflammation. This study introduces a novel therapeutic approach combining ergothioneine (EGT), luteolin (LUT), and quaternized chitosan oxidized dextran (QCOD) to address these challenges and facilitate wound healing in hypoxic DFUs. In vitro, assessments have validated the biosafety, antioxidant, and antimicrobial properties of the ergothioneine-luteolin-chitin (QCOD@EGT-LUT) hydrogel.

[A multicenter study of neonatal stroke in Shenzhen, China].

Objectives: To investigate the incidence rate, clinical characteristics, and prognosis of neonatal stroke in Shenzhen, China.

Methods: Led by Shenzhen Children's Hospital, the Shenzhen Neonatal Data Collaboration Network organized 21 institutions to collect 36 cases of neonatal stroke from January 2020 to December 2022. The incidence, clinical characteristics, treatment, and prognosis of neonatal stroke in Shenzhen were analyzed.

Temperature-sensitive metal-enhanced fluorescence and plasmon resonance energy transfer.

Experimental decoupling of the effects of plasmon resonance energy transfer (PRET) and metal-enhanced fluorescence (MEF) within the same nanometal-fluorophore pair is fascinating but challenging. In this study, we presented a possible solution for this by coating plasmonic Au nanoparticles (AuNPs) with temperature-sensitive poly(-isopropylacrylamide) (pNIPAM) shells and R6G hybrids, termed the Au@p-R nanoplatform, which could reversibly adjust the separation between dyes and the AuNP surface, enabling an ON/OFF switch between MEF and PRET. In our optimization process, we discovered that 20 kDa of pNIPAM causes an MEF effect owing to an appropriate shrinking distance of 6.

Nanochannel Stability of Chemically Converted Graphene Oxide Membranes.

Chemically converted graphene oxide laminate membranes, which exhibit stable interlayered nanochannels in aqueous environments, are receiving increasing attention owing to their potential for selective water and ion permeation. However, how the molecular properties of conversion agents influence the stabilization of nanochannels and how effectively nanochannels are stabilized have rarely been studied. In this study, mono-, di-, and tri-saccharide molecules of glucose (Glu), maltose (Glu2), and maltotriose (Glu3) are utilized, respectively, to chemically modify graphene oxide (GO).

Deubiquitinase BRCC3 promotes the migration, invasion and EMT progression of colon adenocarcinoma by stabilizing MET expression.

Background: Breast cancer type 1 susceptibility protein/breast cancer type 2 susceptibility protein-containing complex subunit 3 (BRCC3), a deubiquitinase (DUBs), is overexpressed in various cancers. However, the underlying biological roles of BRCC3 in adenocarcinoma colon (COAD) have yet to be decrypted.

Objective: In this work, we explored the potential biological function of BRCC3 in the natural process of COAD cells.

Survival and morbidity in very preterm infants in Shenzhen: a multi-center study.

Objective: To analyze survival and morbidity among very preterm infants (VPIs) in Shenzhen and explore factors associated with survival without major morbidity.

Methods: Between January 2022 and December 2022, 797 infants were admitted to 25 neonatal intensive care units in Shenzhen with gestational age (GA) < 32 weeks, excluded discharged against medical advice, insufficient information, and congenital malformation, 742 VPIs were included. Comparison of maternal and neonate characteristics, morbidities, survival, and survival without major morbidities between groups used Mann Whitney test and test, multivariate logistic regression was used to analyze of risk factors of survival without major morbidities.

Recent Advances in Understanding of the Singlet Oxygen in Energy Storage and Conversion.

Singlet oxygen (term symbol Δ, hereafter O), a reactive oxygen species, has recently attracted increasing interest in the field of rechargeable batteries and electrocatalysis and photocatalysis. These sustainable energy conversion and storage technologies are of vital significance to replace fossil fuels and promote carbon neutrality and finally tackle the energy crisis and climate change. Herein, the recent progresses of O for energy storage and conversion is summarized, including physical and chemical properties, formation mechanisms, detection technologies, side reactions in rechargeable batteries and corresponding inhibition strategies, and applications in electrocatalysis and photocatalysis.

Study on brazing sealing and wave transmittance of single crystal AlO microwave window.

AlO is considered a promising material for high-power microwave windows due to its low dielectric loss, excellent mechanical properties, and outstanding corrosion resistance. However, the inherent brittleness and low thermal conductivity pose significant challenges in achieving a dependable metal seal. In this study, vacuum brazing technology was employed to achieve brazing sealing between copper and single crystal AlO.