Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
Surface passivation is a vital approach to improve the photovoltaic performance of perovskite solar cells (PSCs), in which the passivator solvent is an inevitable but easy-ignored factor on passivation effects. Herein, a universal ternary solvent system of surface passivators is proposed through comprehensively considering the solubility and selective perovskite dissolution of the solvent to maximize the passivation effect. Tetrahydrothiophene 1-oxide (THTO) is selected as the passivation promoter by comparing the binding energy with perovskite and the ability to distort the perovskite lattice among various aprotic polar solvent molecules, which can facilitate the passivator's reaction with perovskite and achieve sufficient passivation on perovskite surface. Besides, chlorobenzene (CB) is used as the diluting agent to minimize the amount of isopropanol (IPA), inhibiting the additional solvent-induced defects. As a result, the planar PSCs achieve a power conversion efficiency (PCE) of 26.05%, (certificated 25.66%). Besides, the unencapsulated devices exhibit enhanced stability, which can maintain 95.23% and 95.68% of their initial PCE after 2000 h of storage in ambient air and 800 h of light-soaking in N-glovebox. Moreover, this ternary solvent system also exhibits a well applicability and reliability in different passivator such as PEAI, BAI, and so on.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/adma.202410390 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Effect of preparation method on the structure and properties of kaempferol-loaded zein-gum arabic nanoparticles.
J Sci Food Agric
September 2025
College of Food Science & Technology, Shanghai Ocean University, Shanghai, China.
Background: Kaempferol (KAE), a bioactive flavonoid, has limited solubility and stability in water. Zein-gum arabic (GA) nanoparticles (NPs) are promising carriers for KAE, but the influence of preparation methods on their structure and properties remains unclear. This study investigated the effect of preparation method on the structure and properties of KAE-loaded zein-GA NPs.
View Article and Find Full Text PDFExtracting soluble lignin from poplar sawdust via ternary cetyltrimethylammonium bromide-based deep eutectic solvent pretreatment for the fabrication of biodegradable films.
Int J Biol Macromol
September 2025
School of Pharmacy & School of Biological and Food Engineering, Changzhou University, Changzhou, 213164, Jiangsu Province, China.. Electronic address:
The multi-component deep eutectic solvents (DES) have emerged as indispensable tools in the lignocellulosic pretreatment process, facilitating the efficient biotransformation of biomass sugars into valuable products. In this investigation, FeCl was ingeniously incorporated to amplify the pretreatment efficacy of a DES synthesized from cetyltrimethylammonium bromide (CTAB) and lactic acid (LA), specifically targeting poplar sawdust (PS). Remarkably, under the meticulously optimized molar ratio of 1: 4:1, this innovative ternary DES achieved an unprecedented removal of 68.
View Article and Find Full Text PDFNovel ternary deep eutectic solvent coupled with in-situ-ultrasound synergistic extraction of flavonoids from Epimedium wushanense: machine learning, mechanistic investigation, and antioxidant activity.
Ultrason Sonochem
September 2025
Chongqing Field Scientific Observation and Research Station for Authentic Traditional Chinese Medicine in the Three Gorges Reservoir Area, Chongqing University of Education, Chongqing 400067, China; College of Biological and Chemical Engineering, Chongqing University of Education, Chongqing 400067,
This study innovatively developed a novel ternary deep eutectic solvent coupled with in-situ-ultrasound synergistic extraction (TDES-ISUSE)method for efficient extraction of total flavonoids (TF) fromEpimedium wushanense. Among 20 prepared DESs, the ternary system composed of choline bitartrate, urea, and glycerol (Chb:Ure:Gly) exhibited the highest extraction efficiency. Response surface methodology-artificial neural network-genetic algorithm (RSM-ANN-GA) optimization identified the optimal extraction parameters: water content of 32 %, vortex time of 10 min, liquid/solid ratio of 34:1 mL/g, ultrasound time of 30 min, and ultrasound power of 270 W.
View Article and Find Full Text PDFOver 19% Efficiency Polymer Solar Cells Enabled by Selectively Tuning Bulkheterojunction Morphology via a Dual-Heating Strategy.
Small Methods
September 2025
Key Laboratory of Advanced Materials Chemistry and Devices (AMCDLab) of the Department of Education of Inner Mongolia Autonomous Region, College of Chemistry and Environment Science, Inner Mongolia Normal University, Hohhot, 010022, China.
Photovoltaic performance of bulkheterojunction (BHJ)-based organic solar cells is critically governed by morphologies of donor:acceptor blends as light-harvesting layers. However, ideal morphological control remains challenging due to the systems' complexity. In this work, a sequential dual-heating (DH) strategy is presented to precisely tailor the BHJ morphology in a D18-Cl:Y6 system, achieving a remarkable 19.
View Article and Find Full Text PDFQuadruple Shape-Memory Organohydrogels with Adjustable Trigger Temperatures.
ACS Omega
August 2025
Department of Chemistry, Istanbul Technical University, Maslak, Istanbul 34469, Turkey.
Organohydrogels (OHGs) are a class of soft materials with a biphasic structure consisting of hydrophilic and hydrophobic domains that interact with both water and organic solvents. This gives them unique properties and various applications, e.g.
View Article and Find Full Text PDF