A 3D-Printed Bionic Membrane with Autonomously Passive Unidirectional Liquid Transfer Capability for Water Condensation, Collection, and Purification.

Interfacial solar vapor generation is a promising technology for alleviating the current global water crisis, and the evaporation rate and efficiency have approached the theoretical limit. In a practical interfacial evaporation water purification system, the collection rate of purified water is typically lower than the evaporation rate. Passive collection devices based on gravity are susceptible to environmental influences and exhibit low collection efficiency, while active collection devices consuming external energy suffer from complex device systems and extra energy consumption.

Promoting Charge-Carriers Dynamics by Relaxed Lattice Strain in A-site-Doped Halide Perovskite for Photocatalytic H Evolution.

Because of the unique and superior optoelectronic properties, metal halide perovskites (MHPs) have attracted great interest in photocatalysis. Element doping strategy is adopted to modify perovskite materials to improve their photocatalytic performance. However, the contribution of bare doping-site onto photocatalytic efficiency, and the correlation between doping locations and activity have not yet to be demonstrated.

Li Ion-Dipole Interaction-Enabled a Dynamic Supramolecular Elastomer Interface Layer for Dendrite-Free Lithium Metal Anodes.

The unstable lithium (Li)/electrolyte interface, causing inferior cycling efficiency and unrestrained dendrite growth, has severely hampered the practical deployment of Li metal batteries (LMBs), particularly in carbonate electrolytes. Herein, we present a robust approach capitalizing on a dynamic supramolecular elastomer (DSE) interface layer, which is capable of being reduced with Li metal to spontaneously form strong Li ion-dipole interaction, thereby enhancing interfacial stability in carbonate electrolytes. The soft phase in the DSE structure enables fast Li transport via loosely coordinated Li-O interaction, while the hard phase, rich in electronegative lithiophilic sites, drives the generation of fast-ion-conducting solid electrolyte interface components, including LiN and LiS.

Toward High-Performance Li-Rich Mn-Based Layered Cathodes: A Review on Surface Modifications.

Lithium-rich manganese-based layered oxides (LRMOs) have received attention from both the academic and the industrial communities in recent years due to their high specific capacity (theoretical capacity ≥250 mAh g), low cost, and excellent processability. However, the large-scale applications of these materials still face unstable surface/interface structures, unsatisfactory cycling/rate performance, severe voltage decay, etc. Recently, solid evidence has shown that lattice oxygen in LRMOs easily moves and escapes from the particle surface, which inspires significant efforts on stabilizing the surface/interfacial structures of LRMOs.

Tetraphenylethene-Based Molecular Cage with Coenzyme FAD: Conformationally Isomeric Complexation toward Photocatalysis-Assisted Photodynamic Therapy.

Flavin adenine dinucleotide (FAD), serving as a light-absorbing coenzyme factor, can undergo conformationally isomeric complexation within different enzymes to form various enzyme-coenzyme complexes, which exhibit photocatalytic functions that play a crucial role in physiological processes. Constructing an artificial photofunctional system using FAD or its derivatives can not only develop biocompatible photocatalytic systems with excellent activities but also further enhance our understanding of the role of FAD in biological systems. Here, we demonstrate a supramolecular approach for constructing an artificial enzyme-coenzyme-type host-guest complex with photoinduced catalytic function in water.

d-Electrons of Platinum Alloy Steering CO Pathway for Low-Charge Potential Li-CO Batteries.

Aprotic Li-CO batteries suffer from sluggish solid-solid co-oxidation kinetics of C and LiCO, requiring extremely high charging potentials and leading to serious side reactions and poor energy efficiency. Herein, we introduce a novel approach to address these challenges by modulating the reaction pathway with tailored Pt d-electrons and develop an aprotic Li-CO battery with CO and LiCO as the main discharge products. Note that the gas-solid co-oxidation reaction between CO and LiCO is both kinetically and thermodynamically more favorable.

Ultra-Tough Dynamic Supramolecular Ion-Conducting Elastomer Induced Uniform Li Transport and Stabilizes Interphase Ensures Dendrite-Free Lithium Metal Anodes.

Artificial polymer solid electrolyte interphases (SEIs) with microphase-separated structures provide promising solutions to the inhomogeneity and cracking issues of natural SEIs in lithium metal batteries (LMBs). However, achieving homogeneous ionic conductivity, excellent mechanical properties, and superior interfacial stability remains challenging due to interference from hard-phase domains in ion transport and solid-solid interface issues with lithium metal. Herein, we present a dynamic supramolecular ion-conducting poly (urethane-urea) interphase (DSIPI) that achieves these three properties through modulating the hard-phase domains and constructing a composite SEI in situ.

Water-soluble AIE photosensitizer in short-wave infrared region for albumin-enhanced and self-reporting phototheranostics.

Organic photosensitizers (PSs) play important roles in phototheranostics, and contribute to the fast development of precision medicine. However, water-soluble and highly emissive organic PSs, especially those emitting in the short-wave infrared region (SWIR), are still challenging. Also, it's difficult to prepare self-reporting PSs for visualizing the treatment via stimulated emission depletion (STED) nanoscopy.

Interfacial Thermoconvection and Atomic Relay Catalysis Enable Equilibrium Shifting and Rapid Glucose-to-Fructose Isomerization.

The aqueous glucose-to-fructose isomerization is controlled by thermodynamics to an equilibrium limit of ~50 % fructose yield. However, here we report an in situ fructose removal strategy enabled by an interfacial local photothermal effect in combination with relay catalysis of geminal and isolated potassium single atoms (K SAs) on graphene-type carbon (K/GT) to effectively bypass the equilibrium limit and markedly speed up glucose-to-fructose isomerization. At 25 °C, an unprecedented fructose yield of 68.

Boosting Chemiexcitation of Phenoxy-1,2-dioxetanes through 7-Norbornyl and Homocubanyl Spirofusion.

The chemiluminescent light-emission pathway of phenoxy-1,2-dioxetane luminophores is increasingly attracting the scientific community's attention. Dioxetane probes that undergo rapid, flash-type chemiexcitation demonstrate higher detection sensitivity than those with a slower, glow-type chemiexcitation rate. This is primarily because the rapid flash-type produces a greater number of photons within a given time.

Nonsolvent-Induced Phase Separation pPAN Separators for Dendrite-Free Rechargeable Aluminum Batteries.

Rechargeable aluminum batteries (RAB) are a promising energy storage system with high safety, long cycle life, and low cost. However, the strong corrosiveness of chloroaluminate ionic liquid electrolytes (ILEs) severely limits the development of RAB separators. Herein, a nonsolvent-induced phase separation strategy was applied to fabricate the pPAN (poly(vinyl alcohol)-modified polyacrylonitrile) separator, which exhibits prominent chemical and electrochemical stability in ILEs.

Synthesis of α,α-Difluoromethylene Amines from Thioamides Using Silver Fluoride.

We developed a mild, rapid process employing AgF and thioamides to produce α,α-difluoromethylene amines efficiently. This method exhibited remarkable tolerance toward various functional groups present in -sulfonylthioamides, thereby broadening the scope of difluoromethylene sulfonamides through a straightforward approach. Additionally, we applied this approach to synthesize various perfluoroalkyl amines, establishing practical synthetic routes for exploring these compounds in pharmaceutical chemistry and materials science.

Synergistic effect of Fe-Ru alloy and Fe-N-C sites on oxygen reduction reaction.

In the pursuit of optimizing Fe-N-C catalysts for the oxygen reduction reaction (ORR), the incorporation of alloy nanoparticles has emerged as a prominent strategy. In this work, we effectively synthesized the FeRu-NC catalyst by anchoring Fe-Ru alloy nanoparticles and FeN single atom sites onto carbon nanotubes. The FeRu-NC catalyst exhibits significantly enhanced ORR activity and long-term stability, with a high half-wave potential of 0.

Isolation and Diverse Reactivity of an Unsymmetrical 1,2-Bis(silylene)-Stabilized Pentacarbonyl Chromium(0) Species.

The construction of the unsymmetrical 1,2-bis(silylene) pentacarbonyl chromium(0) complex was achieved through the reaction of chlorosilylene with half an equivalent of KCr(CO). X-ray diffraction analysis of confirms the formation of the Si-Si bond and the coordination of one of the silicon atoms to the Cr center. Density functional theory (DFT) calculations disclose that highest occupied molecular orbital (HOMO) mainly corresponds to the lone pair of electrons on the silicon atom and the σ-bonding interaction between two Si atoms.

Theoretical Insights of Curvature Effects of FeN-Doped Carbon Nanotubes on ORR Activity.

The advancement of metal-air batteries is critically contingent on the progression of efficient catalysts for the oxygen reduction reaction (ORR). The potential applications of a series of FeN-doped carbon nanotubes (Fe-NCNTs) of varying diameters as ORR catalysts were examined using density functional theory. We explored the stability and electronic properties of Fe-NCNTs by analyzing the energy and examining the density of states.

Preferred crystal plane electrodeposition of aluminum anode with high lattice-matching for long-life aluminum batteries.

Aluminum batteries have become the most attractive next-generation energy storage battery due to their advantages of high safety, high abundance, and low cost. However, the dendrite problem associated with inhomogeneous electrodeposition during cycling leads to low Coulombic efficiency and rapid short-circuit failure of the aluminum metal anode, which severely hampers the cycling stability of aluminum battery. Here we show an aluminum anode material that achieves high lattice matching between the substrate and the deposit, allowing the aluminum deposits to maintain preferred crystal plane growth on the substrate surface.

Hydrogen Peroxide Spillover on Platinum-Iron Hybrid Electrocatalyst for Stable Oxygen Reduction.

Iron-nitrogen-carbon (Fe-N-C) catalysts, although the most active platinum-free option for the cathodic oxygen reduction reaction (ORR), suffer from poor durability due to the Fe leaching and consequent Fenton effect, limiting their practical application in low-temperature fuel cells. This work demonstrates an integrated catalyst of a platinum-iron (PtFe) alloy planted in an Fe-N-C matrix (PtFe/Fe-N-C) to address this challenge. This novel catalyst exhibits both high-efficiency activity and stability, as evidenced by its impressive half-wave potential () of 0.

Chemiexcitation Acceleration of 1,2-Dioxetanes by Spiro-Fused Six-Member Rings with Electron-Withdrawing Motifs.

The chemiluminescent light-emission pathway of phenoxy-1,2-dioxetane luminophores attracts growing interest within the scientific community. Dioxetane probes undergoing rapid flash-type chemiexcitation exhibit higher detection sensitivity than those with a slow glow-type chemiexcitation rate. We discovered that dioxetanes fused to non-strained six-member rings, with hetero atoms or inductive electron-withdrawing groups, present both accelerated chemiexcitation rates and elevated chemical stability compared to dioxetanes fused to four-member strained rings.

High-voltage and dendrite-free zinc-iodine flow battery.

Zn-I flow batteries, with a standard voltage of 1.29 V based on the redox potential gap between the Zn-negolyte (-0.76 vs.

The Molecular Design and Electroluminescent Performance of Near-Infrared (NIR) Iridium(III) Complexes Bearing Isoquinoline-, Phthalazine- and Phenazine-Based Ligands.

Near-infrared (NIR) light has characteristics of invisibility to human eyes, less background interference, low light scattering, and strong cell penetration. Therefore, NIR luminescent materials have significant applications in imaging, sensing, energy, information storage and display. The development of NIR luminescent materials thus has emerged as a highly dynamic area of research in the realm of contemporary materials.

In-situ growth of carbon nanotubes for the modification of wood-derived biomass porous carbon to achieve efficient Low/Mid-Frequency electromagnetic wave absorption.

Ideal wave-absorbing materials are required to possess the characteristics such as being "broad, lightweight, thin, and strong." Biomass-derived materials for absorbing electromagnetic waves (EMWs) are widely explored due to their low cost, lightweight, environmentally friendly, high specific surface area, and porous structure. In this study, wood was used as the raw material, and N-doped carbon nanotubes were grown in situ in porous carbon derived from wood, loaded with magnetic metal Co nanoparticles through chemical vapor deposition.

Highly Tough Slide-Crosslinked Gel Polymer Electrolyte for Stable Lithium Metal Batteries.

Gel polymer electrolytes (GPEs) hold great promise for the practical application of lithium metal batteries. However, conventional GPEs hardly resists lithium dendrites growth and maintains long-term cycling stability of the battery due to its poor mechanical performance. Inspired by the slide-ring structure of polyrotaxanes (PRs), herein we developed a dynamic slide-crosslinked gel polymer electrolyte (SCGPE) with extraordinary stretchability of 970.