Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
This study examined the comprehensive properties of Mg-Zn-Nd-Zr alloys in order to achieve both high strength and thermal conductivity simultaneously. The impact of rolling on the microstructure, mechanical properties, and thermal conductivity was analyzed for Mg-5Zn-xNd-0.4Zr alloys (x = 1, 2). The results indicate that the addition of Nd promotes the formation of the W phase (MgZnRE), which contributes to grain boundary strengthening and enhances the overall strength. Moreover, dynamic precipitation during the rolling process leads to the formation of nanoscale MgZn and ZnZr phases, significantly improving both the strength and thermal conductivity. After rolling, both the Mg-5Zn-1Nd-0.4Zr (ZNK510) and Mg-5Zn-2Nd-0.4Zr (ZNK520) alloys exhibited a notable enhancement in thermal conductivity, with ZNK520 demonstrating superior properties due to its higher Nd content. This study highlights that optimizing alloy composition and phase evolution through rolling can markedly enhance both the mechanical and thermal properties, offering a promising strategy for the development of high-performance magnesium alloys.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC12348978 | PMC |
| http://dx.doi.org/10.3390/ma18153578 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Thickness-Dependent Low Lattice Thermal Conductivity of Chemical Vapor-Deposited SnSe Nanosheets.
ACS Nano
September 2025
State Key Lab of New Ceramic Materials, School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China.
SnSe is a layered semiconductor with intrinsically low thermal conductivity, making it a promising candidate for thermoelectric and thermal management applications. However, detailed measurements of the intrinsic thermal conductivity of SnSe nanosheets grown by chemical vapor deposition (CVD) remain scarce. Here, monocrystalline SnSe nanosheets were synthesized by CVD, with systematic investigation of thickness-dependent in-plane thermal conductivity.
View Article and Find Full Text PDFSelenium-regulated band structure engineering in CF cathodes enables high-power and wide-temperature Li/CF primary batteries.
J Colloid Interface Sci
August 2025
School of Chemistry and Chemical Engineering, Shandong University of Technology, Zibo 255000, PR China. Electronic address:
Li/CF primary batteries are renowned for their exceptional energy density, yet their practical deployment is hindered by the inherently sluggish kinetics of the CF cathode. This study addresses this limitation by incorporating selenium (Se) into CF (denoted as CF/Se) via a facile low-temperature thermal treatment, significantly enhancing its electrochemical performance. Comprehensive spectroscopic and electrochemical analyses reveal that Se doping induces the formation of CSe bonds, which promote semi-ionic CF bonding, thereby accelerating Li diffusion and reducing charge transfer resistance.
View Article and Find Full Text PDFImproving Printed and Thermoformed Conductors on Polycarbonate with a Thin-Film BNNT Interlayer for Next-Generation In-Mold Electronics.
ACS Appl Mater Interfaces
September 2025
Chemical and Biological Engineering, University of Ottawa, 161 Louis Pasteur, Ottawa, Ontario K1N 6N5, Canada.
The processes of thermoforming 2D-printed electronics into 3D structures can introduce defects that impact the electrical performance of conductors, making them more susceptible to thermal failure during high electrical power/current applications on temperature-sensitive substrates. We therefore report the use of a thin-film boron nitride nanotube (BNNT) interlayer to directly reduce heat stress on linear and serpentine metallic traces on polycarbonate substrates thermoformed to 3D spherocylindrical geometries at varying elongation percentages. We demonstrate that the BNNT interlayer helps to improve the electrical conductivity of highly elongated thermoformed 3D traces in comparison to traces on bare polycarbonate.
View Article and Find Full Text PDFFunctionalization of Defective Covalent Organic Frameworks for High-Performance Solid-State Electrolytes.
Small
September 2025
School of Materials Science and Engineering, East China Jiaotong University, Nanchang, 330013, China.
Covalent organic frameworks (COFs) exhibit outstanding structural tunability, clearly defined ion pathways, and remarkable thermal/chemical stabilities, rendering them highly promising candidates for applications in solid-state electrolytes. However, it remains a challenge to develop a versatile method to incorporate both ionic groups and electron-withdrawing units into a single framework for effectively improving the lithium-ion conductivity. Herein, a series of novel [3+3] defective COFs is successfully synthesized featuring active amine/aldehyde anchoring sites for subsequent post-modification, and regulates the ion conductivity through elaborately tuning the anionic/cationic groups and weak/strong electron-withdrawing units.
View Article and Find Full Text PDFHigh Performance Sulfide Solid-State Battery Electrolytes Regulation Mechanism: A Review.
Angew Chem Int Ed Engl
September 2025
College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, 325035, China.
Sulfide solid electrolytes (SEs) exhibit excellent ionic conductivity and good mechanical properties, but their poor air stability and solid-solid contact performance seriously hinder the wide application of sulfide all-solid-state batteries (ASSBs). Herein, this paper reviews the history and the major breakthroughs in the development of sulfide SEs. The theories of hard-soft-acid-base theory and glass structure theory, as well as several strategies to improve the chemical stability of sulfide SEs, are discussed emphatically.
View Article and Find Full Text PDF