Strong and Healable Elastomers with Photothermal-Stimulus Dynamic Nanonetworks Enabled by Subnano Ultrafine MoO Nanowires.

ACS Appl Mater Interfaces

State Key Laboratory of Solidification Processing, Center of Advanced Lubrication and Seal Materials, Northwestern Polytechnical University, Xi'an 710072, Shaanxi, P.R. China.

Published: September 2024


Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

One-dimensional nanomaterials have become one of the most available nanoreinforcing agents for developing next-generation high-performance functional self-healing composites owing to their unique structural characteristics and surface electron structure. However, nanoscale control, structural regulation, and crystal growth are still enormous challenges in the synthesis of specific one-dimensional nanomaterials. Here, oxygen-defective MoO nanowires with abundant surface dynamic bonding were successfully synthesized as novel nanofillers and photothermal response agents combined with a polyurethane matrix to construct composite elastomers, thus achieving mechanically enhanced and self-healing properties. Benefiting from the surface plasmon resonance of the MoO nanowires and interfacial multiple dynamic bonding interactions, the composite elastomers demonstrated strong mechanical performance (with a strength of 31.45 MPa and elongation of 1167.73%) and ultrafast photothermal toughness self-healing performance (20 s and an efficiency of 94.34%). The introduction of MoO nanowires allows the construction of unique three-dimensional cross-linked nanonetworks that can move and regulate interfacial dynamic interactions under 808 nm infrared laser stimulation, resulting in controlled mechanical and healing performance. Therefore, such special elastomers with strong photothermal responses and mechanical properties are expected to be useful in next-generation biological antibacterial materials, wearable devices, and artificial muscles.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.4c11724DOI Listing

Publication Analysis

Top Keywords

moo nanowires
16
one-dimensional nanomaterials
8
dynamic bonding
8
composite elastomers
8
strong healable
4
elastomers
4
healable elastomers
4
elastomers photothermal-stimulus
4
dynamic
4
photothermal-stimulus dynamic
4

Similar Publications

The anisotropic/anisotropic mixed-dimensional nanostructures, integrating two-dimensional (2D) materials with other low-dimensional counterparts, can generate a unique quantum phenomenon due to an additional degree of freedom enabling precise control over anisotropy and may provide a fascinating platform for advanced materials and innovative devices. Herein, we report the synthesis of an anisotropic/anisotropic 1D/2D mixed-dimensional homojunction, specifically a 1D/2D MoO mixed-dimensional homojunction, composed of a 1D MoO anisotropic nanowire and a 2D MoO anisotropic nanoplate. This synthesis was achieved in a single step using the space-constrained rapid chemical vapor deposition (s-CVD) method.

View Article and Find Full Text PDF

Ellagic acid-imbedded MoO nanowires architecture: External mediator-less electrochemical immunoprobing of inflammatory bowel disease marker.

Biosens Bioelectron

November 2025

Electrodics and Electrocatalysis Division, CSIR-Central Electrochemical Research Institute, Karaikudi, 630 003, Tamil Nadu, India; Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, 201002, India. Electronic address:

Oxidative stress biomarkers such as 8-iso-prostaglandin F (8-iso-PGF2α) dictate a central dogma of clinically prevalent (non) communicable diseases such as inflammatory bowel disease (IBD) but are less explored owing to the complexity, sensitivity, and selectivity of conventional detecting methods. Thus, there is an urgent need for a rapid, simple, and reliable method for point-of-care (POC) detection of 8-iso-PGF2α. Herein, linker chemistry mediated ellagic acid imbedded MoO NWs architecture is employed as an external mediator-free transducer to develop an 8-iso-PGF2α biosensor.

View Article and Find Full Text PDF

Nickel nano-network facilitates short-path hydrogen spillover for efficient alkaline hydrogen evolution with high-current-densities.

Chem Commun (Camb)

June 2025

School of Metallurgy and Environment, National Energy Metal Resources and New Materials Key Laboratory, Hunan Provincial Key Laboratory of Nonferrous Value-Added Metallurgy, Central South University, Changsha 410083, China.

Oxide-supported catalysts are constrained by their inherently poor conductivity and isolated active sites, which hinder their ability to demonstrate effective hydrogen evolution reaction (HER) activity at high-current-densities. Here, we developed an alkaline HER catalyst comprising a nano-network assembled by Ni nanoparticles grown on MoO nanowires. Owing to the short-path hydrogen spillover and rapid electron transfer facilitated by the Ni nano-network, the catalyst achieves a current density of 1000 mA cm at an extremely low overpotential of 165 mV, with a remarkable stability under high-current-densities.

View Article and Find Full Text PDF

Precise modulation of nickel-molybdenum alloy (MoNi)/molybdenum dioxide nanowires via a ternary nickel-cobalt-iron complex for enhanced electrochemical overall water splitting.

J Colloid Interface Sci

September 2025

Engineering Technology Research Center of Preparation and Application of Industrial Ceramics of Anhui Province, Engineering Research Center of High-frequency Soft Magnetic Materials and Ceramic Powder Materials of Anhui Province, School of Chemistry and Material Engineering, Chaohu University, Chaoh

Developing renewable and clean energy technologies necessitates the design of efficient bifunctional catalysts that can facilitate electrochemical water splitting without relying on inert metals. This study presents a novel three-step strategy for fabricating nickel cobalt iron (NiCoFe)-modified nickel-molybdenum alloy/molybdenum dioxide (MoNi/MoO) nanowires on nickel foam (NF) substrates, denoted as NiCoFe-MoNi/MoO/NF. The synthesized catalyst demonstrates exceptional performance, achieving an impressively low overpotential (13 mV) at 10 mA·cm current density for the hydrogen evolution reaction (HER) and 230 mV at 50 mA·cm for the oxygen evolution reaction (OER).

View Article and Find Full Text PDF

Two-Step Tandem Catalysis for High-Efficiency Ammonia Synthesis Via Nitrate Reduction on Anion-Intercalated CoNi LDH and Cu/CuO.

Adv Sci (Weinh)

July 2025

Department of Environmental Science & Engineering, School of Energy and Power Engineering, Xi'an Jiaotong University, 28 Xianning West Road, Xi'an, 710049, China.

Ammonia is essential across industry, agriculture, and as a future carbon-free energy carrier. Electrocatalytic nitrate reduction (NitRR) offers a sustainable path for removing nitrate contaminants from wastewater and groundwater while using abundant nitrate ions as nitrogen sources under eco-friendly conditions. However, the NitRR pathway, which involves sequential reactions, poses challenges in synchronizing the rate of nitrate-to-nitrite conversion with the subsequent reduction of nitrite to ammonia, particularly as the initial reduction step is rate-limiting.

View Article and Find Full Text PDF