98%
921
2 minutes
20
The performance of Li-ion batteries (LIBs) at sub-ambient temperatures is limited by the resistive interphases due to electrolyte decomposition, particularly on the anode surface. In this study, lithium fluorosulfonate (LFS) was added to commercial electrolytes to enhance the low-temperature electrochemical performance of LiFePO (LFP)/graphite (Gr) pouch cells. The addition of LFS significantly reduced the charge transfer resistance of the anode, substantially extending the cycle life and discharge capacity of commercial LFP/Gr pouch cells at -10 and -30 °C. Compared with the capacity retention rate of the baseline electrolyte at -10 °C (80 % after 25cycles), the capacity retention rate of the LFS electrolyte after 100 cycles under 0.5 C/0.5 C was retained at 94 %. Further mechanistic studies showed that the LFS additive induced the formation of a solid electrolyte interphase (SEI) film comprising inorganic-rich LiF, LiSO, and additional organic fluorides and sulfides to maintain good stability at the Gr/electrolyte interface during low-temperature operation. LFS suppressed electrolyte decomposition by forming a robust and low-resistance SEI film on the anode. These results demonstrate that LFS is a promising electrolyte additive for low-temperature LFP/Gr pouch cells.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.jcis.2024.05.009 | DOI Listing |
J Am Chem Soc
September 2025
Department of Chemistry, Zhejiang University, Hangzhou 310027, China.
Narrow electrochemical windows and high reactivity of aqueous solutions remain critical bottlenecks for the practical application of aqueous batteries. However, the mechanisms for tuning microscopic reactivity of HO molecules in aqueous electrolytes remain elusive. This study employs six ether molecules with distinct structures and solvation powers to regulate the microstructure of aqueous solutions.
View Article and Find Full Text PDFChem Sci
September 2025
School of Resources, Environment and Materials, Guangxi Key Laboratory of Processing for Non-ferrous Metals and Featured Materials, Guangxi University Nanning 530004 P. R. China
To overcome the persistent challenges of sluggish lithium polysulfide (LiPS) conversion kinetics and the shuttle effect in Li-S batteries, this work introduces a novel, cost-effective thermal treatment strategy for synthesizing high-entropy metal phosphide catalysts using cation-bonded phosphate resins. For the first time, we successfully fabricated single-phase high-entropy FeCoNiCuMnP nanoparticles anchored on a porous carbon network (HEP/C). HEP/C demonstrates enhanced electronic conductivity and superior LiPS adsorption capability, substantially accelerating its redox kinetics.
View Article and Find Full Text PDFAngew Chem Int Ed Engl
September 2025
State Key Laboratory of Chemical Resource Engineering, Beijing Key Laboratory of Electrochemical Process and Technology of Materials, Beijing University of Chemical Technology, Beijing, 10029, P.R. China.
Lithium metal batteries (LMBs) have emerged as the most promising candidate for next-generation high-energy-density energy storage systems. However, their practical implementation is hindered by the inability of conventional carbonate electrolytes to simultaneously stabilize the lithium metal anode and LiNiCoMnO (NCM811) cathode interfaces, particularly under extreme operating conditions. Herein, we present a transformative molecular design using 3,5-difluorophenylboronic acid neopentyl glycol ester (DNE), which uniquely integrates dual interfacial stabilization mechanisms in a single molecule.
View Article and Find Full Text PDFNano Lett
September 2025
Center for 2D Quantum Heterostructures, Institute for Basic Science (IBS), Suwon 16419, Republic of Korea.
Ultrathin amorphous materials are promising counterparts to 2D crystalline materials, yet their properties and functionalities remain poorly understood. Amorphous boron nitride (aBN) has attracted attention for its ultralow dielectric constant and superior manufacturability compared with hexagonal boron nitride. Here, we demonstrate wafer-scale growth of ultrathin aBN films with exceptional thickness and composition uniformity using capacitively coupled plasma-chemical vapor deposition (CCP-CVD) at 400 °C.
View Article and Find Full Text PDFAngew Chem Int Ed Engl
September 2025
School of Chemistry, Engineering Research Center of Energy Storage Materials and Devices, Ministry of Education, National Innovation Platform (Center) for Industry-Education Integration of Energy Storage Technology, State Key Laboratory of Electrical Insulation and Power Equipment, Engineering Resea
Lithium metal batteries (LMBs) offer exceptional energy density and output voltage. However, their practical application remains hindered by sluggish ion transport and uncontrolled lithium dendrite formation, particularly under fast-charging conditions. Here, we report a facet-engineered anion-regulating separator based on zeolitic imidazolate framework-8 (ZIF-8) with preferentially crystal-exposed (110) facets.
View Article and Find Full Text PDF