Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Objective: To compare the biomechanical properties of two ultra-strong sutures and suturing methods in panda rope bridge technique (PRBT) application, and provide guidance for clinical selection of suture threads and suture methods.

Methods: Forty Achilles tendons from bulls were randomly divided into 4 groups ( =10) and transected at the 4 cm proximal to the tendon insertion. Groups A and B used Ethibond sutures (USP 5), the proximal end was fixed at the myotendious junction with Krackow sutures and the distal end was fixed through a calcaneus canal. Groups A and B had 4 and 8 threads through the stump plane, respectively. Groups C and D used Ultrabraid sutures (USP 2), the proximal end was fixed at the myotendious junction with Krackow sutures and the distal end was fixed in the calcaneus with two anchors. Groups C and D had 4 and 8 threads through the stump plane, respectively. The dynamic tensile forces of 20-100, 20-200, 20-300, and 20-400 N were tested respectively by using a dynamic tensile testing machine at 0.5 Hz for 250 cycles. After each stage of testing, the gap between stumps was measured with a caliper and the type of suture failure was recorded.

Results: After dynamic tensile forces of 20-100 N and 20-200 N, the gaps of the four groups arranged from small to large were groups D, B, C, and A. The differences between groups A and B and groups C and D were significant ( <0.05). But after dynamic tensile forces of 20-300 N and 20-400 N, the gaps were more than 5 mm in all groups. The suture retention rates of the four groups after dynamic tensile forces of 20-100 N and 20-200 N were all 100%. The suture retention rates of groups A, B, C, and D were 0, 80%, 60%, and 100%, respectively after dynamic tensile forces of 20-300 N. The differences of suture retention rates between group A and groups B and D were significant ( <0.05). There was no significant difference between groups B, C, and D ( >0.05). After dynamic tensile forces of 20-400 N, the suture retention rates of groups A, B, C, and D were 0, 50%, 0, and 70%, respectively. There were significant differences between groups A and B and groups C and D ( <0.05).

Conclusion: Repairing Achilles tendon rupture via PRBT with 8 ultra-strong sutures through the stump plane can meet the mechanical requirements for walking by using ankle boots and heel pads in the early accelerated rehabilitation after operation.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8355862PMC
http://dx.doi.org/10.7507/1002-1892.201811038DOI Listing

Publication Analysis

Top Keywords

dynamic tensile
12
groups
9
ultra-strong sutures
8
panda rope
8
rope bridge
8
sutures usp
8
usp proximal
8
proximal fixed
8
fixed myotendious
8
myotendious junction
8

Similar Publications

Conductive hydrogels have revolutionized wearable electronics due to their biocompatibility and tunable properties. However, it remains a great challenge for hydrogel-based sensors to maintain both conductivity and mechanical integrity in harsh environments. Synergistic dynamic interactions provide a promising strategy to address this issue.

View Article and Find Full Text PDF

Polyphenolic nanodots loaded multi-layer MXene for strong, tough and rapidly biodegradable polyvinyl alcohol/starch nanocomposites with self-healing ability and improved aging resistance.

Carbohydr Polym

November 2025

Key Lab of Guangdong Province for High Property and Functional Polymer Materials, School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China. Electronic address:

Inspired by spider silk, polyphenolic nanodots (PTa) loaded multi-layer MXene (mMXene-PTa) through hydrogen and coordination bonds was prepared by self-polymerizing tannic acid on mMXene and used as a new crosslinker for polyvinyl alcohol (PVA). Together with starch (ST), mMXene-PTa was compounded with PVA and exfoliated to fabricate PVA/ST/mMXene-PTa nanocomposite. The phenolic hydroxyl groups in PTa formed high-density H-bonds with PVA and ST, creating an organic-inorganic dynamic crosslinking network with mMXene-PTa as nodes.

View Article and Find Full Text PDF

Polyphenol-derived vitrimers offer compelling prospects for sustainable materials owing to their intrinsic recyclability, reprocessability and biodegradability. However, practical development remains constrained by structure degradation under harsh reprocessing conditions and the need for sophisticated modifications of the bio-sourced precursors. Herein, we reported a strategy that integrates commercially available polyphenols and low-molecular-weight PDMS through adaptable iminoboronate chemistry, obviating the need for structural modifications.

View Article and Find Full Text PDF

Side-Chain Poly[2]rotaxane-Toughened Graphene Films.

ACS Macro Lett

September 2025

State Key Laboratory of Synergistic Chem-Bio Synthesis, Frontiers Science Center for Transformative Molecules, School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Shanghai 200240, P. R. China.

Graphene-based films are highly valued for their superior conductivity, thermal stability, and mechanical strength, yet their brittleness and low ductility limit their full potential. Current toughening strategies for graphene-based composites mainly focus on interfacial reinforcement between polymers and graphene substrates. However, research on energy dissipation arising from the intrinsic properties of polymers remains limited.

View Article and Find Full Text PDF

Rational design of an ultra-high-gain MoS phototransistor enabling room-temperature detection of few-photon signals and attomolar-level immunosensing.

Sci Bull (Beijing)

August 2025

Key Laboratory for Micro/Nano Optoelectronic Devices of Ministry of Education & Hunan Provincial Key Laboratory of Low-Dimensional Structural Physics and Devices, School of Physics and Electronics, Hunan University, Changsha 410082, China. Electronic address:

Determining the number of photons in an incident light pulse at room temperature is the ultimate goal of photodetection. Herein, we report a plasmon-strain-coupled tens of photon level phototransistor by integrating monolayer MoS on top of Au nanowire (NW). Within this structure, Au NW can greatly enhance incident light intensity around MoS, and the large tensile strain can reduce the contact energy barrier between MoS and Au NW, so as to achieve efficient injection of plasmonic hot electrons into MoS.

View Article and Find Full Text PDF