The Coiling Effect in Ether Ionic Liquids: Exploiting Acetate as a Probe for Transport Properties and Microenvironment Analysis.

The inherently high viscosity of ionic liquids (ILs) can limit their potential applications. One approach to address this drawback is to modify the cation side chain with ether groups. Herein, we assessed the structure-property relationship by focusing on acetate (OAc), a strongly coordinating anion, with 1,3-dialkylimidazolium cations with different side chains, including alkyl, ether, and hydroxyl functionalized, as well as their combinations.

Cellulose acylation in homogeneous and heterogeneous media: Optimization of reactions conditions.

The dependence of the DS on the acid anhydride/anhydroglucose unit ((RCO)O/AGU) molar ratio was correlated using second-order polynomials. The regression coefficients of the (RCO)O/AGU terms showed that increasing the length of the RCO group of the anhydride led to lower values of DS. For acylation under heterogeneous reaction conditions, the following were employed: acid anhydrides and butyryl chloride as acylating agents; iodine as a catalyst; N,N-dimethylformamide (DMF) as a solvent, pyridine, and triethylamine as solvents and catalysts.

Dissolution of Silk Fibroin in Mixtures of Ionic Liquids and Dimethyl Sulfoxide: On the Relative Importance of Temperature and Binary Solvent Composition.

We studied the dependence of dissolution of silk fibroin (SF) in mixtures of DMSO with ionic liquids (ILs) on the temperature ( = 40 to 80 °C) and DMSO mole fraction ( = 0.5 to 0.9).

Ionic Liquid-Based Surfactants: Recent Advances in Their Syntheses, Solution Properties, and Applications.

The impetus for the expanding interest in ionic liquids (ILs) is their favorable properties and important applications. Ionic liquid-based surfactants (ILBSs) carry long-chain hydrophobic tails. Two or more molecules of ILBSs can be joined by covalent bonds leading, e.

Cellulose Dissolution in Mixtures of Ionic Liquids and Dimethyl Sulfoxide: A Quantitative Assessment of the Relative Importance of Temperature and Composition of the Binary Solvent.

We studied the dissolution of microcrystalline cellulose (MCC) in binary mixtures of dimethyl sulfoxide (DMSO) and the ionic liquids: allylbenzyldimethylammonium acetate; 1-(2-methoxyethyl)-3-methylimidazolium acetate; 1,8-diazabicyclo [5.4.0]undec-7-ene-8-ium acetate; tetramethylguanidinium acetate.

Engineering of sustainable biomaterial composites from cellulose and silk fibroin: Fundamentals and applications.

This review addresses composites prepared from cellulose (Cel) and silk fibroin (SF) to generate multifunctional, biocompatible, biodegradable materials such as fibers, films and scaffolds for tissue engineering. First, we discuss briefly the molecular structures of Cel and SF. Their structural features explain why certain solvents, e.

Concentration- and Temperature-Responsive Reversible Transition in Amide-Functionalized Surface-Active Ionic Liquids: Micelles to Vesicles to Organogel.

A ubiquitous example of DNA and proteins inspires the scientific community to design synthetic systems that can construct various self-assembled complex nano-objects for high-end physiological functions. To gain insight into judiciously designed artificial amphiphilic structures that through self-assembling form various morphological architectures within a single system, herein, we have studied self-aggregation of amide-functionalized surface-active ionic liquids (AFSAILs) with different head groups in the DMSO/water mixed system. The AFSAIL forms stimuli-responsive reversible micelle and vesicle configurations that coexist with three-dimensional (3D) network structures, the organogel in the DMSO/water mixed system.

Cellulose in Ionic Liquids and Alkaline Solutions: Advances in the Mechanisms of Biopolymer Dissolution and Regeneration.

This review is focused on assessment of solvents for cellulose dissolution and the mechanism of regeneration of the dissolved biopolymer. The solvents of interest are imidazole-based ionic liquids, quaternary ammonium electrolytes, salts of super-bases, and their binary mixtures with molecular solvents. We briefly discuss the mechanism of cellulose dissolution and address the strategies for assessing solvent efficiency, as inferred from its physico-chemical properties.

Ionic Liquid-Based Catanionic Coacervates: Novel Microreactors for Membrane-Free Sequestration of Dyes and Curcumin.

Surfactant-mediated coacervates are termed as the new age microreactors for their ability to spontaneously sequester the molecules with varied polarities and functionalities. Efforts to emulate this applicability of coacervates through synthetic control of surfactant structures are finding success; however, there is little understanding of how to translate these changes into tailor-made properties. Herein, we designed 3-methyl-1-(octyloxycarbonylmethyl)imidazolium bromide (CEMeImBr), an ester-functionalized ionic liquid-based surfactant, which shows better surface active properties than the nonfunctionalized and conventional cationic surfactant and forms complex coacervates over the broad range of concentration with sodium salicylate (NaSal).

Binary mixtures of ionic liquids-DMSO as solvents for the dissolution and derivatization of cellulose: Effects of alkyl and alkoxy side chains.

The efficiency of mixtures of ionic liquids (ILs) and molecular solvents in cellulose dissolution and derivatization depends on the structures of both components. We investigated the ILs 1-(1-butyl)-3-methylimidazolium acetate (CMeImAc) and 1-(2-methoxyethyl)-3-methylimidazolium acetate (COMeImAc) and their solutions in dimethyl sulfoxide, DMSO, to assess the effect of presence of an ether linkage in the IL side-chain. Surprisingly, CMeImAc-DMSO was more efficient than COMeImAc-DMSO for the dissolution and acylation of cellulose.

Ultrasound exfoliation of graphite in biphasic liquid systems containing ionic liquids: A study on the conditions for obtaining large few-layers graphene.

Herein we describe a successful protocol for graphite exfoliation using a biphasic liquid system (water/dichloromethane, DCM) containing ionic liquids (ILs; 1,3-dibenzylimidazolium benzoate- and 1-naphthoate). The use of (surface active) IL and sonication led to stable DCM/water (O/W) emulsion, which enhanced graphene formation, suppressed its re-aggregation and decreased shear/cavitation damage. The O/W emulsion stabilization by the ILs was studied by dynamic light scattering (DLS), whereas their interaction with the graphene sheets were described by Density Functional Theory (DFT) calculations.

Dependence of cellulose dissolution in quaternary ammonium-based ionic liquids/DMSO on the molecular structure of the electrolyte.

We synthesized a series of quaternary ammonium acetates (QAAcOs) and assessed their solutions in DMSO as cellulose solvents. NAcO/DMSO did not dissolve cellulose; substitution of its methyl groups resulted in efficient cellulose solvents; NAcO/DMSO dissolved cellulose with difficulty. We attribute the inefficiency of both QAAcOs to: strong anion-cation interactions, NAcO; steric effects and cation-cation hydrophobic interactions, NAcO.

Thermo-Switchable de Novo Ionic Liquid-Based Gelators with Dye-Absorbing and Drug-Encapsulating Characteristics.

An ionic liquid-based surfactant with ester functionality self-aggregates in an aqueous medium and forms ionogels at 8.80% (w/v) concentration at physiological pH. The ionogel exhibited a remarkable change in its appearance with temperature from fibrillar opaque to transparent because of the dynamic changes within its supramolecular structure.

Recent Advances in Solvents for the Dissolution, Shaping and Derivatization of Cellulose: Quaternary Ammonium Electrolytes and their Solutions in Water and Molecular Solvents.

There is a sustained interest in developing solvents for physically dissolving cellulose, i.e., without covalent bond formation.

Drug-Induced Micelle-to-Vesicle Transition of a Cationic Gemini Surfactant: Potential Applications in Drug Delivery.

An impetus for the sustained interest in the formation of vesicles is their potential application as efficient drug-delivery systems. A simple approach for ionic surfactants is to add a vesicle-inducing drug of opposite charge. In ionic gemini surfactants (GSs) two molecules are covalently linked by a spacer.

Cellulose carboxylate/tosylate mixed esters: Synthesis, properties and shaping into microspheres.

Cellulose carboxylate/tosylate mixed esters (Cel-Carboxy/Ts) were synthesized with constant degree of tosylation, DSTs=0.98 and variable degree of acylation, DSCarboxy; acetate, butanoate, and hexanoate. The tosylate (Cel-Ts) was prepared by reacting cellulose with tosyl chloride in presence of trimethylamine.

Molecular Dynamics Simulations of the Initial-State Predict Product Distributions of Dediazoniation of Aryldiazonium in Binary Solvents.

The dediazoniation of aryldiazonium salts in mixed solvents proceeds by a borderline SN1 and SN2 pathway, and product distribution should be proportional to the composition of the solvation shell of the carbon attached to the -N2 group (ipso carbon). The rates of dediazoniation of 2,4,6-trimethylbenzenediazonium in water, methanol, ethanol, propanol, and acetonitrile were similar, but measured product distributions were noticeably dependent on the nature of the water/cosolvent mixture. Here we demonstrated that solvent distribution in the first solvation shell of the ipso carbon, calculated from classical molecular dynamics simulations, is equal to the measured product distribution.

Acylation of cellulose in a novel solvent system: solution of dibenzyldimethylammonium fluoride in DMSO.

A novel electrolyte, dibenzyldimethylammonium fluoride has been obtained essentially anhydrous (BMAF-0.1H2O) by a simple route. Its thermal stability, relative to tetra(1-butyl)ammonium fluoride trihydrate (TBAF3H2O) has been demonstrated by thermogravimetric analysis.

Efficient cellulose solvent: quaternary ammonium chlorides.

Pure quaternary tetraalkylammonium chlorides with one long alkyl chain dissolved in various organic solvents constitute a new class of cellulose solvents. The electrolytes are prepared in high yields and purity by Menshutkin quaternization, an inexpensive and easy synthesis route. The pure molten tetraalkylammonium chlorides dissolve up to 15 wt% of cellulose.

Bio-based Films from Linter Cellulose and Its Acetates: Formation and Properties.

This paper describes the results obtained on the preparation of films composed of linter cellulose and the corresponding acetates. The acetylation was carried out in the LiCl/DMAc solvent system. Films were prepared from a LiCl/DMAc solution of cellulose acetates (degree of substitution, DS 0.

Effect of counterions on the shape, hydration, and degree of order at the interface of cationic micelles: the triflate case.

Specific ion effects in surfactant solutions affect the properties of micelles. Dodecyltrimethylammonium chloride (DTAC), bromide (DTAB), and methanesulfonate (DTAMs) micelles are typically spherical, but some organic anions can induce shape or phase transitions in DTA(+) micelles. Above a defined concentration, sodium triflate (NaTf) induces a phase separation in dodecyltrimethylammonium triflate (DTATf) micelles, a phenomenon rarely observed in cationic micelles.

Perichromism: a powerful tool for probing the properties of cellulose and its derivatives.

This overview is concerned with the use of certain dyes (perichromic indicators, hereafter designated as "probes") in order to determine the properties of cellulose, its solutions and solid derivatives. It is arranged as follows: (i) the properties of cellulose and its derivatives that are relevant to their applications are listed; (ii) a general discussion is presented on how perichromism can be employed in order to gain information on the medium where the probe is present; (iii) the results of perichromism, as applied to cellulose, cellulose solutions, and derivative films are discussed.

Kinetics and mechanism of imidazole-catalyzed acylation of cellulose in LiCl/N,N-dimethylacetamide.

Cellulose acylation by anhydrides (ethanoic to hexanoic) plus tosyl chloride, TsCl, or imidazole in LiCl/N,N-dimethylacetamide solution has been studied. Contrary to a previous claim, TsCl does not catalyze acylation. For the diazole-catalyzed reaction, N-acylimidazole is the acylating agent.

Chemistry and applications of polysaccharide solutions in strong electrolytes/dipolar aprotic solvents: an overview.

Biopolymers and their derivatives are being actively investigated as substitutes for petroleum-based polymers. This has generated an intense interest in investigating new solvents, in particular for cellulose, chitin/chitosan, and starch. This overview focuses on recent advances in the dissolution and derivatization of these polysaccharides in solutions of strong electrolytes in dipolar aprotic solvents.

Successful application of an ionic liquid carrying the fluoride counter-ion in biomacromolecular chemistry: microwave-assisted acylation of cellulose in the presence of 1-allyl-3-methylimidazolium fluoride/DMSO mixtures.

The use of ionic liquids with fluoride anion (IL-F) is challenging because of side reactions. Neat 1-allyl-3-methylimidazolium fluoride (AlMeImF) is used as a solvent in microwave-assisted acylation of cellulose. The results are disappointing due to side reactions in the IL proper, and F(-) -mediated hydrolysis of the produced ester.