Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
An electrochemical sensor demonstrating exceptional sensitivity was constructed for bisphenol F analysis. Carbon nanocages and Prussian blue nanocubes were synthesized and then applied to modify a glassy carbon electrode layer by layer, creating the unique sensing platform. The combination of carbon nanocages and Prussian blue nanocubes greatly improved the charge transfer rate and offered a substantial surface area for bisphenol F adsorption. Exhibiting outstanding electrocatalytic performance for bisphenol F oxidation, the as-proposed electrode provided a broad linear range from 0.1 to 500 μM and a low detection limit of 0.03 μM (S/N = 3). The sensor manifested strong selectivity, showing minimal interference from typical coexisting substances. Its stability and reproducibility were evaluated, and the results were satisfactory. The sensor effectively determined bisphenol F in real samples, achieving recoveries between 95.7 % and 98.4 %. This study offers a promising method for the sensitive and precise detection of bisphenol F in environmental samples, significantly contributing to environmental monitoring.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.ecoenv.2025.118901 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Spectro-Electrochemical Insights into Electrocatalytic CO Reduction in Acidic Media through Model Catalyst Design.
J Am Chem Soc
September 2025
Soochow Institute for Energy and Materials Innovations, College of Energy, Soochow University, Suzhou 215006, P. R. China.
Electrocatalytic CO reduction (eCOR) under acidic conditions is the game changer of resourceful CO utilization owing to the alleviated carbon loss but faces severe competition from the hydrogen evolution reaction (HER) that greatly curtails the electric current efficiency. Leveraging the eCOR side of the teeterboard calls for a fundamental understanding of the triphasic electrode process involving a complex arrangement of electric double layers (EDLs). Herein, a series of model catalysts with tailored cavernous parameters are fabricated to geometrically and spectroscopically decipher the competing HER and eCOR processes that engage different proton sources.
View Article and Find Full Text PDFAtomically Asymmetrical Ruthenium-Oxygen-Cobalt Sites Accelerate Oxygen Redox and Suppress Side Reactions for Stable Lithium-Oxygen Batteries.
ACS Nano
September 2025
Key Laboratory of Eco-chemical Engineering, International Science and Technology Cooperation Base of Eco-chemical Engineering and Green Manufacturing, College of Chemistry and Molecular Engineering, Qingdao University of Science and Technology, Qingdao 266042, P. R. China.
Development of aprotic lithium-oxygen (Li-O) batteries suffers from slow cathode reaction kinetics, numerous side reactions, and large polarization, which are intimately related to the discharge product of LiO. Here, we designed and prepared a modified CoO nanoparticle with atomic Ru substitution at octahedral Co sites supported by carbon nanocages (RuCoO@HCNs) as a cathode catalyst. The asymmetrical octahedral Ru-O-Co units trigger a strong electron coupling effect, leading to charge redistribution and optimization of the d-orbital energy levels, thus facilitating oxygen activation and conversion into superoxide anions during discharging.
View Article and Find Full Text PDFHigh-Entropy Alloy Nanoparticles Encapsulated in Carbon Nanocages Supported by Carbon Fibers as Enhanced Lithium-Sulfur Battery Interlayers.
ACS Appl Mater Interfaces
August 2025
College of Textile Science and Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China.
The shuttle effect, low electrical conductivity, and sluggish reaction kinetics of sulfur significantly limit the practical application of lithium-sulfur (Li-S) batteries. In this study, high-entropy alloy nanoparticles encapsulated in carbon nanocages and supported by carbon fibers (HEA@NC/CF) are prepared as an interlayer material in Li-S batteries to address these challenges. The HEA nanoparticles provide abundant adsorption and catalytic sites.
View Article and Find Full Text PDFEnhanced sensitive detection of bisphenol F via an electrode with dual-layered modification of carbon nanocages and Prussian blue nanocubes.
Ecotoxicol Environ Saf
August 2025
Key Laboratory of Pollution Control Chemistry and Environmental Functional Materials for Qinghai-Tibet Plateau of the National Ethnic Affairs Commission, School of Chemistry and Environment, Southwest Minzu University, Chengdu, PR China.
An electrochemical sensor demonstrating exceptional sensitivity was constructed for bisphenol F analysis. Carbon nanocages and Prussian blue nanocubes were synthesized and then applied to modify a glassy carbon electrode layer by layer, creating the unique sensing platform. The combination of carbon nanocages and Prussian blue nanocubes greatly improved the charge transfer rate and offered a substantial surface area for bisphenol F adsorption.
View Article and Find Full Text PDFDimensionality Effect of Nanocarbon Precursors on Diamond Synthesis under Extreme Conditions.
Adv Mater
August 2025
School of Interdisciplinary Science, Beijing Institute of Technology, Beijing, 100081, China.
Diamond holds significant promise for a wide range of applications due to its exceptional physicochemical properties. Investigating the controlled diamond preparation from nanocarbon precursors with varying dimensionalities is crucial to optimize the transition conditions and even elucidate the daunting transformation mechanism, however, this remains outstanding challenge despite considerable effort. Herein, the imperative dimensionality effect of nanocarbon precursors on diamond synthesis and the physical mechanism under high temperature and high pressure is reported, by comparing the distinct transition processes of 0D carbon nanocages (CNCs) and 1D carbon nanotubes (CNTs) from conventional graphite.
View Article and Find Full Text PDF