Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

CO huff-and-puff demonstrates excellent injectivity and gas channeling resistance in tight reservoirs, yet aqueous phase invasion significantly diminishes its oil recovery efficiency. To investigate the mechanisms of aqueous phase impacts, CO huff-and-puff experiments were conducted under varying water saturation levels, complemented by extended core displacement tests with different injection patterns. A triphilic surfactant, CEOPOCOOCH (CEPC), was introduced to mitigate aqueous phase interference. Its performance in reducing interfacial tension (IFT) and enhancing CO dissolution/diffusion was systematically evaluated. Optimal injection parameters were determined through 1D core experiments, followed by 2D planar flooding experiments to assess recovery enhancement mechanisms. Results reveal that aqueous phases impair CO diffusion and sweep efficiency, weakening solution gas drive effects. Compared to anhydrous conditions, oil recovery decreased by 10.25%, 19.12%, and 26.03% at 5%, 10%, and 20% water saturation, respectively. CEPC reduced the CO-water and CO-oil IFT by 89.4% and 76.8%, respectively, while accelerating the CO dissolution kinetics by 2.1-3.4 times at 50% water saturation. At 20% water saturation, the optimal concentration of CEPC is 0.5 wt %, while the optimal soaking pressure and soaking time for the CO huff-and-puff are 20 MPa and 12 h, respectively. In 2D experiments, CEPC-assisted CO huff-and-puff achieved 25.36% oil recovery, representing a 9.56% enhancement over conventional CO injection. The synergy arises through two mechanisms: CEPC facilitates CO breakthrough across aqueous phases to amplify dissolved gas drive by increasing CO-oil contact and dissolution capacity, while simultaneously reducing capillary confinement of aqueous phases in micronano pores to alleviate water blockage and enhance sweep efficiency. These findings provide critical insights for optimizing the recovery of CO-enhanced nanoparticles in water-bearing tight reservoirs.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC12355248PMC
http://dx.doi.org/10.1021/acsomega.5c04576DOI Listing

Publication Analysis

Top Keywords

oil recovery
16
water saturation
16
aqueous phase
12
aqueous phases
12
triphilic surfactant
8
tight reservoirs
8
sweep efficiency
8
gas drive
8
20% water
8
recovery
6

Similar Publications

Ball Milling Approaches for Biomass-Derived Nanocarbon in Advanced Sustainable Applications.

Chem Rec

September 2025

Interdisciplinary Research Center for Hydrogen Technologies and Carbon Management (IRC-HTCM), King Fahd University of Petroleum & Minerals, KFUPM Box 5040, Dhahran, 31261, Saudi Arabia.

The synthesis of biomass-derived nanocarbons via ball milling has emerged as an innovative, sustainable, and cost-effective strategy in the field of nanotechnology. This review comprehensively explores the principles, mechanisms, and process parameters that influence the production of high-quality nanocarbons from biomass using ball milling. This process efficiently transforms biomass residues into nanoscale carbon, including graphene, carbon nanotubes, and nanofibers, with tunable physicochemical properties tailored for advanced applications.

View Article and Find Full Text PDF

The global warming crisis, traceable to the rise in greenhouse gas emissions, has called for more proactive measures to curb the emission levels. To this effect, several technologies have been suggested. Out of the lot, carbon capture, utilization, and storage have been identified as one of the most feasible and pragmatic methods.

View Article and Find Full Text PDF

Polyesters, with their tunable chemical structures and environmental sustainability, have drawn growing attention as solid polymer electrolytes for next-generation solid-state lithium metal batteries (SSLMBs). Through a comprehensive experimental and theoretical study involving the systematic variation of carbon chain lengths in the flexible (diol) and coordinating (diacid) segments, along with selective fluorination at distinct positions along the polymer backbone, 18 types of polyester are fabricated and demonstrate that fluorination at the coordinating segment significantly enhances ionic conductivity by suppressing crystallinity. In contrast, fluorination at the flexible segment reduces ionic migration barriers by providing more homogeneous coordinating sites, thereby improving the lithium-ion transference number, despite increasing chain rigidity and a reduction in overall ionic conductivity.

View Article and Find Full Text PDF

Bimetallic FeNi-ZSM-5-catalyzed pyrolysis of photovoltaic waste: Selective and high-yield aromatic valorization for circular resource recovery.

Environ Res

September 2025

Guangdong Education Department Key Laboratory of Resources Comprehensive Utilization and Cleaner Production, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou, 510006, China.

Catalytic pyrolysis, an efficient thermochemical process, offers a promising pathway to valorize thermoset photovoltaic backsheets (TPV) into high-value chemicals. This study investigates the ex situ catalytic pyrolysis of TPV using two acidic catalysts, ZSM-5 and FeNi-ZSM-5, under varied operational conditions, with a focus on product distribution and process efficiency. The catalytic intervention significantly enhanced pyrolysis performance.

View Article and Find Full Text PDF

This study introduces the HydroTherm-Flow Smart Window (HTF Window), the first groundbreaking integration of thermochromic windows and Fe-Cr redox flow batteries (Fe-Cr RFBs), achieving dual functionalities of dynamic solar modulation-via dual-band (visible + near-infrared, NIR) modulation-and high-efficiency energy storage in a single component. Leveraging tunable hydroxypropyl cellulose (HPC) hydrogels, it enables ultrafast optical switching and autonomous nighttime opacity, overcoming the slow response and privacy limitations of conventional thermochromic systems. By repurposing the window as a compact electrolyte reservoir, it reduces the RFB spatial footprint while enhancing ionic conductivity by 30% via hydrogel "ion highways," achieving 77% energy efficiency with a 40% reduction in the solar heat gain coefficient.

View Article and Find Full Text PDF