Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
Developing highly active and durable electrocatalysts for cost-effective proton-exchange membrane fuel cells is challenging. Fe/N-C catalysts are among the most promising alternatives to the platinum group metal catalysts, but their activity and durability still cannot meet the performance criteria due to the strong adsorption of oxygenated reaction intermediates and the demetallization of Fe species caused by the Fenton reaction. Here we design and develop a new type of Fe/N-C catalyst that is composed of numerous nanoprotrusions dispersed on two-dimensional carbon layers with single Fe-atom sites primarily embedded within the inner curved surface of the nanoprotrusions. The graphitized outer carbon layer of the nanoprotrusions can not only effectively weaken the binding strength of the oxygenated reaction intermediates, but also reduce the hydroxyl radical production rate. As a result, the Fe/N-C catalyst delivers one of the best-performing platinum group metal-free proton-exchange membrane fuel cell performances, achieving a record high power density of 0.75 W cm under 1.0 bar H-air with 86% activity retention after more than 300 hours of continuous operation.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1038/s41586-025-09364-6 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Is high specific surface area essential for anode catalyst supports in proton exchange membrane water electrolysis?
Mater Horiz
September 2025
New Cornerstone Science Laboratory, State Key Laboratory for Physical Chemistry of Solid Surfaces, Collaborative Innovation Center of Chemistry for Energy Materials, and College of Chemistry and Chemical Engineering, Xiamen University, Xiamen, 361005, China.
Dispersing iridium onto high-specific-surface-area supports is a widely adopted strategy to maximize iridium utilization in anode catalysts of proton exchange membrane water electrolysis (PEMWE). However, here we demonstrate that the overall cell performance, including initial efficiency and long-term stability, does not benefit from the typical high specific surface area of catalyst supports. The conventional understanding that high iridium utilization on high-specific-surface-area supports increases activity holds only in aqueous electrolytes, while under the typical working conditions of PEMWE, the mass transport within the anode catalyst layers plays a more significant role in the overall performance.
View Article and Find Full Text PDFSynthesis control of rhombic dodecahedral PtNiFe nanostructures for enhanced oxygen reduction reaction.
Nanoscale
September 2025
Department of Electrical Engineering, Chosun University, 309, Pilmun-daero, Dong-gu, Gwangju, 61452, South Korea.
Platinum and platinum-based alloys have been reported to exhibit enhanced electrochemical properties in proton exchange membrane fuel cells and electrolyzers. The development of platinum alloy-based catalysts has focused on designing structures with highly active surfaces and optimizing the utilization of the noble metal Pt. In this study, we demonstrate the synthesis of novel nanostructures with a rhombic dodecahedral morphology through precursor syntheses of Pt, Ni, and Fe.
View Article and Find Full Text PDFEffects of a sulfonated hydrophilic cross-linked network on the microstructure and properties of Nafion matrix.
Chem Commun (Camb)
September 2025
College of Polymer Science and Engineering, State Key Laboratory of Advanced Polymer Materials, Sichuan University, Chengdu, 610065, China.
A hydrophilic cross-linked proton exchange membrane was constructed in a Nafion matrix based on azide polysulfone containing sulfonic acid (SPSU-N) and alkynyl substituted polyvinyl alcohol (APVA) through azide-alkyne click chemistry reaction. Arising from the increased polarity of the cross-linked network and high cross-linking density, the alcohol barrier performance of the Nafion membrane was greatly improved. The methanol permeability of the Nafion/cross-linked SPSU-N and APVA membrane decreases to 1.
View Article and Find Full Text PDFHigh Performance Monometallic Platinum Fuel Cell Catalyst Derived from Self-Hole-Confined Nanoparticles and Nitrogen-Anchored Single-Atoms.
Small Methods
September 2025
Research Center for Analysis and Measurement, Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming, 650093, P. R. China.
Platinum and non-precious metal (PtM) alloy multimetallic catalysts have been developed to address the kinetically sluggish oxygen reduction reaction (ORR) occurring at the cathodes of proton exchange membrane fuel cells (PEMFCs). However, these catalysts inevitably suffer from poor lot-to-lot consistency of chemical compositions and structures during production, and the transition metal leaching in practical applications. Thus, the development of high-performance monometallic Pt catalysts using innovative nanoarchitectures has become important to address the technical challenges that hinder the widespread deployment of the PEMFCs.
View Article and Find Full Text PDFThe optimization of electrochemical hydride generation technology for treating antimony-containing wastewater.
PLoS One
September 2025
School of Geography and Resources, Guizhou Education University, Guiyang, China.
Antimony (Sb) is extensively utilized in industrial activities, but most of its compounds exhibit human toxicity and are classified as priority-controlled pollutants. Unlike traditional electrochemical methods that remove metallic pollutants via coagulation or precipitation, electrochemical hydride generation technology converts antimony (Sb) in wastewater into stibine gas (SbH3) for efficient removal. Furthermore, the generated SbH₃ can be decomposed thermally to partially recover metallic antimony.
View Article and Find Full Text PDF