Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

As a rapidly expanding family of 2D materials, MXenes have recently gained considerable attention. Herein, by developing a coating method that enables transfer-free and layer-by-layer film coating, the nonlinear optical absorption (NOA) of TiCT MXene films is investigated. Using the -scan technique, the NOA of the MXene films is characterized at ≈800 nm. The results show that there is a strong and layer-dependent NOA behavior, transitioning from reverse saturable absorption (RSA) to saturable absorption (SA) as the layer number increases from 5 to 30. Notably, the nonlinear absorption coefficient changes significantly from ≈7.13 × 10 cm GW to ≈-2.69 × 10 cm GW within this range. The power-dependent NOA of the MXene films is also characterized, and a decreasing trend in is observed for increasing laser intensity. Finally, the NOA of 2D MXene films at ≈1550 nm is characterized by integrating them onto silicon nitride waveguides, where an SA behavior is observed for the films including 5 and 10 layers of MXene, in contrast to the RSA observed at ≈800 nm. These results reveal intriguing nonlinear optical properties of 2D MXene films, highlighting their versatility and potential for implementing high-performance nonlinear photonic devices.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11935064PMC
http://dx.doi.org/10.1002/smsc.202400179DOI Listing

Publication Analysis

Top Keywords

mxene films
24
nonlinear optical
12
noa mxene
12
optical absorption
8
films characterized
8
saturable absorption
8
mxene
7
films
7
nonlinear
5
absorption
5

Similar Publications

Bimorph Soft Actuators Based on Isostructural Heterogeneous Janus Films.

ACS Nano

September 2025

State Key Laboratory of Flexible Electronics (LoFE) & Institute of Advanced Materials (IAM), Nanjing University of Posts & Telecommunications, 9 Wenyuan Road, Nanjing 210023, China.

Bimorph soft actuators, traditionally composed of two materials with distinct responses to external stimuli, often face durability challenges due to structural incompatibility. Here, we propose an alternative design employing free-standing, isostructural heterogeneous Janus (IHJ) films that harmonize stability with high actuation efficiency. These IHJ films were fabricated through a vacuum self-assembly process, consisting of TiCT MXene nanosheets and hybrid graphene oxide (GO)-biomass bacterial cellulose (BC), with a well-matched two-dimensional lattice structure.

View Article and Find Full Text PDF

High wet-strength MXene/lignin-containing cellulose nanofibrils composite films with Janus structure for electromagnetic shielding and Joule heating.

Int J Biol Macromol

September 2025

State Key Laboratory of Advanced Paper making and Paper-based Materials, South China University of Technology, Guangzhou, Guangdong Province, 510640, PR China.

Developing MXene-based electromagnetic interference (EMI) shielding composite films with exceptional wet mechanical properties is crucial to address the limitation of conventional MXene-based EMI shielding composite films in humid environments. Herein, we present a fabrication strategy for Janus-structured MXene-based EMI shielding composite films with exceptional wet mechanical and Joule heating performances. Through depositing tannic acid-modified MXene (TM) on maleic anhydride-modified lignin-containing cellulose nanofibril (MLCNF) film using a scalable vacuum filtration and hot-pressing strategy.

View Article and Find Full Text PDF

The rapid advancement of highly integrated electronics demands next-generation electromagnetic interference (EMI) shielding materials that combine lightweight, ultrathin, flexible, and mechanically robust properties with exceptional shielding effectiveness (SE) to mitigate signal crosstalk and ensure device reliability. In this work, we demonstrate the fabrication of high-performance EMI shields using highly conductive, additive-free aqueous TiCT (T = O, OH, Cl, F) MXene dispersions synthesized under both harsh and mild etching conditions. These dispersions were engineered into freestanding thin films and functionalized cotton fabrics vacuum-assisted filtration, enabling tunable EMI shielding properties through precise control of etchant chemistry, flake size, microstructure, thickness, and MXene loading.

View Article and Find Full Text PDF

Different graphene derivatives/MXene hybrid fillers reinforce gelatin composite films in food packaging applications.

Int J Biol Macromol

September 2025

State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Sichuan University, Chengdu 610065, China; Institute for Advanced Study, Chengdu University, Chengdu 610106, China. Electronic address:

In order to extend the shelf life of food especially under sunlight, a synergistic dual-component reinforcement strategy of graphene (graphene oxide, reduced graphene oxide aerogel microspheres) and TiCT MXene was applied as fillers in gelatin (GL) matrix. After simultaneous mechanical stirring and ultrasonication, followed by an ultrasonic cell grinding treatment process, the uniform dispersion and full exfoliation of both kinds of fillers in the GL matrix were ensured through the green synthesis method, which effectively enhanced the antibacterial, mechanical, ultraviolet-visible light barrier, and antioxidant properties of GL. Among these fillers, graphene (GE)/TiCT showed the best enhancing effect because GE had more complete graphene rings with greater extent of sp2-hybridized carbons as well as more edges.

View Article and Find Full Text PDF

In this study, composite films based on phosphorylated polyvinyl alcohol (PVA-P), TiCT MXene, and cholesteryl acetate (ChLC) were designed and characterized to explore their potential in flexible electronic applications. The incorporation of phosphate groups and ChLC enhanced intermolecular interactions, as confirmed with FTIR spectroscopy. Morphological and optical analyses revealed a transition from homogeneous to phase-separated structures with birefringent textures in ChLC-rich films.

View Article and Find Full Text PDF