Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
With the advancement of science and technology, effectively addressing the issue of heat dissipation in electronic equipment has become a key research topic. Polymers have attracted attention due to their low price, excellent flexibility, and lightweight characteristics, but thermal conductivity has a limitation. In this work, aiming for all-polymer composites with lightweight and high thermal conductivity, poly(p-phenylene benzobisoxazole) (PBO) fibers were used to construct a long-range ordered heat transfer path in the organosilicon matrix, and an all-organic composite material with a low density of 1.24 g cm and thermal conductivity of 18.44 W/ (m K) was produced. At the same time, the composite material was applied to the cooling performance test of LED lamps, which was 4.8 °C lower than advanced commercial thermal conductive materials, demonstrating its potential in the field of thermal management materials.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acs.nanolett.4c04601 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Thermally stable and highly wetted asymmetric porous nanocellulose/poly(m-phenylene isophthalamide) composite separators for high-performance lithium-ion batteries.
Int J Biol Macromol
September 2025
Jiangsu Provincial Key Lab for The Chemistry and Utilization of Agro-forest Biomass, Jiangsu Key Lab of Biomass Based Green Fuels and Chemicals, College of Chemical Engineering, Nanjing Forestry University, Nanjing, 210037, China.
Aramid films are potential separator candidates for high-safety lithium-ion batteries (LIBs) due to their inherent flame retardancy and outstanding thermal stability. However, both weak liquid electrolyte wettability and poor mechanical properties of aramid separators for lithium-ion batteries result in low ionic conductivity and unsatisfactory electrochemical performance for LIBs. Herein, a novel asymmetric porous composite separator composed of a relatively dense nanocellulose (CNC) layer and a porous poly(m-phenylene isophthalamide) (PMIA) supporting layer has been fabricated by using a water-induced phase conversion process.
View Article and Find Full Text PDFDiscarded sericultural mulberry branch based triple layer composite phase change material with lignin enhanced thermal management capability.
Int J Biol Macromol
September 2025
Key Laboratory of Bio-Based Material Science and Technology of Ministry of Education, Northeast Forestry University, Harbin, 150040, China. Electronic address:
With the exhaustion of fossil fuels, prior phase change materials are characterized by such drawbacks as poor thermal conductivity, weak shape stability, and high costs. Therefore, the preparation of phase change materials with brilliant thermal-insulating properties, high thermal conductivity, and leakage-free properties has emerged as a crucial research focus. Herein, a sericultural mulberry branch-derived (SMB) composite phase change material was prepared by deep eutectic solvent pretreated SMB and vacuum-assisted impregnated paraffin wax with cupric oxide (CuO).
View Article and Find Full Text PDFIntrinsic and Extrinsic Determinants of Stability in Spiro-OMeTAD-Based Hole-Transporting Layers in Perovskite Solar Cells: Mechanistic Insights and Strategic Perspectives.
Adv Mater
September 2025
Graduate School of Carbon Neutrality, Ulsan National Institute of Science and Technology (UNIST), UNIST-gil 50, Ulsan, 44919, Republic of Korea.
Spiro-OMeTAD has remained the benchmark hole-transporting material (HTM) in state-of-the-art perovskite solar cells, owing to its favorable energy level alignment and excellent interfacial compatibility. However, its practical implementation is critically hindered by the intrinsic instabilities introduced by conventional dopants such as lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and 4-tert-butylpyridine (tBP). While these dopants enhance electrical conductivity, they concurrently initiate multiple degradation pathways-including ionic migration, radical deactivation, and moisture/thermal-induced morphological failure-thereby compromising device longevity and reproducibility.
View Article and Find Full Text PDFThermochromic Hydrogel Smart Window for Iron-Chromium Flow Batteries: Dual Band Modulation and Efficient Energy Storage.
Chemistry
September 2025
State Key Laboratory of Heavy Oil Processing, China University of Petroleum (Beijing), Beijing, 102249, China.
This study introduces the HydroTherm-Flow Smart Window (HTF Window), the first groundbreaking integration of thermochromic windows and Fe-Cr redox flow batteries (Fe-Cr RFBs), achieving dual functionalities of dynamic solar modulation-via dual-band (visible + near-infrared, NIR) modulation-and high-efficiency energy storage in a single component. Leveraging tunable hydroxypropyl cellulose (HPC) hydrogels, it enables ultrafast optical switching and autonomous nighttime opacity, overcoming the slow response and privacy limitations of conventional thermochromic systems. By repurposing the window as a compact electrolyte reservoir, it reduces the RFB spatial footprint while enhancing ionic conductivity by 30% via hydrogel "ion highways," achieving 77% energy efficiency with a 40% reduction in the solar heat gain coefficient.
View Article and Find Full Text PDFCompetition-Coupling Trade-Off of Supramolecular Interactions in Janus Composite Quasi-Solid Electrolytes Enables High-Safety and Long-Life Lithium Metal Batteries.
Small
September 2025
Collaborative Innovation Center for Eco-Friendly and Fire-Safety Polymeric Materials (MoE), National Engineering Laboratory of Eco-Friendly Polymeric Materials (Sichuan), State Key Laboratory of Advanced Polymeric Materials, College of Chemistry, Sichuan University, Chengdu, 610064, China.
The LiAlTi(PO) (LATP)-polymer composite solid electrolyte offers environmental stability and safety for high-energy lithium metal batteries (LMBs), yet suffers from interfacial instability and high interfacial resistance. Herein, a Janus self-supporting skeleton (J-SSK) is engineered via multi-scale coupling of poly(vinylidene fluoride-trifluorethylene) (PVDF-TrFE), LATP, 2-(3-(6-methyl-4-oxo-1,4-dihydropyrimidin-2-yl) ureido) ethyl methacrylate (UPyMA) monomer, where intermolecular multiple hydrogen bonds reinforce mechanical robustness while the Janus structure isolates LATP from direct Li contact. In situ copolymerizing vinylene carbonate (VC) and UPyMA monomer in J-SSK to construct Janus composite quasi-solid electrolyte (J-CQSE) achieves seamless integration of electrode/electrolyte interfaces and establishes hierarchical coupling across J-SSK, polymer matrix, and lithium salts.
View Article and Find Full Text PDF