98%
921
2 minutes
20
The viscoelastic response of carrageenan hydrogels to large amplitude oscillatory shear (LAOS) has not received much attention in the literature in spite of its relevance in industrial application. A set of hybrid carrageenans with differing chemical compositions are gelled in the presence of KCl or NaCl, and their nonlinear viscoelastic responses are systematically compared with mixtures of kappa- and iota-carrageenans of equivalent kappa-carrageenan contents. Two categories of LAOS response are identified: strain softening and strain hardening gels. Strain softening gels show LAOS non-reversibility: when entering the nonlinear viscoelastic regime, the shear storage modulus decreases with increasing strain, and never recovers its linear value after successive LAOS sweeps. In contrast to this, strain hardening carrageenan gels show a certain amount of LAOS reversibility: when entering the nonlinear regime, increases with strain and shows a maximum at strain . For strains applied below , shows good reversibility and the strain hardening behavior is maintained. For strains larger than , decreases significantly indicating an irreversible structural change in the elastic network. Strain hardening and elastic recovery after LAOS prevail for hybrid carrageenan and iota-carrageenan gels, but are only achieved when blends are gelled in NaCl, suggesting a phase separated structure with a certain degree of co-aggregated interface for mixed gels.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11353621 | PMC |
http://dx.doi.org/10.3390/gels10080524 | DOI Listing |
J Mech Behav Biomed Mater
August 2025
School of Mechanical Engineering, Jiangsu Key Laboratory for Design and Manufacturing of Precision Medicine Equipment, Southeast University, Nanjing, 211189, China. Electronic address:
Poly(L-lactic acid) (PLLA), as a substrate material, has been widely utilized in the field of biodegradable vascular stents. Prior to implantation, it is particularly crucial for these devices to assess the relationship of the mechanical properties and microstructures during full degradation cycle. Although previous studies have primarily focused on structural parameters such as crystallinity and molecular weight, there are relatively few reports that explore the impact of microstructure on mechanical performance from the perspective of chain configuration during the degradation.
View Article and Find Full Text PDFRev Sci Instrum
September 2025
Key Laboratory of Ocean Energy Utilization and Energy Conservation of Ministry of Education, Dalian University of Technology, Dalian 116024, People's Republic of China.
Metastable hydrates are widely distributed in shallow deep-sea sediments, posing significant risks to the long-term stability of offshore foundation structures. Unveiling the weakening mechanisms at the hydrate-bearing sediment-structure interface is crucial for establishing a theoretical framework for the safe design of deep-sea structures. A high-pressure (up to 12.
View Article and Find Full Text PDFAdv Mater
September 2025
National Engineering Research Center for Biomaterials, Sichuan University, 29# Wangjiang Road, Chengdu, Sichuan, 610064, China.
Large-scale and deep trauma restricts the effective hemostasis and tissue regeneration management, even causing death. The formation of the fibrin network is the initial stage of wound control. Inspired by Fn's characteristics during coagulation, an artificial polycationic fibroin (pCSF/β) is designed to achieve hemostasis-regeneration transition.
View Article and Find Full Text PDFSci Adv
August 2025
State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, China.
Elastic bendability is crucial for flexible electronics to achieve conformal contact and enable widespread applications. However, reducing the thickness of the structure is almost the only strategy to enhance the elastic bendability of inorganic flexible electronics. This study proposes an overbend strategy, whose operation is beyond the designed elasticity of the fabricated structure.
View Article and Find Full Text PDFUltrason Sonochem
August 2025
School of Mechatronics Engineering, Harbin Institute of Technology, Harbin, 150001, People's Republic of China. Electronic address:
One of the central challenges in soft matter mechanics is to achieve reversible and programmable modulation of viscoelasticity in polymer-based elastomers at small strains, which is crucial for precision engineering and advanced functional devices. Conventional approaches are constrained by irreversibility and lack of dynamic control. In this study, it is demonstrated that ultrasonic vibration (19-22 kHz) enables dynamic, reversible, and tunable modulation of the mechanical response in such materials.
View Article and Find Full Text PDF