98%
921
2 minutes
20
Wireless sensor networks have developed quickly in recent years, and the use of self-powered technology to replace traditional external power sources to power sensor nodes has become an urgent problem that needs to be solved. As an entirely novel type of self-powered technology, the triboelectric nanogenerator (TENG) has attracted widespread attention, but the inability to achieve adaptive adjustment based on the vibration environment has restricted the development of TENGs. Here, a magnetic liquid triboelectric nanogenerator (ML-TENG) is designed to harvest vibration energy to power sensing nodes, and ML-TENG tuning is achieved using a magnetic liquid to adapt to different vibration environments. The electrical performance of the ML-TENG was investigated by theoretical, experimental, and numerical research. According to the results, the developed ML-TENG responds well to low-frequency vibration, and the instantaneous power is up to 5.40 nW. The tuning function is achieved by adjusting the magnetic field, and the natural frequency can be adjusted between 6.6 Hz and 7.6 Hz. The strong linear connection between the output voltage of the ML-TENG and the external environment's vibration amplitude promotes the monitoring of the vibration environment and lays the groundwork for the creation of wireless sensor networks.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1039/d3nr04574a | DOI Listing |
Carbohydr Polym
November 2025
Jiangsu Provincial Key Laboratory of Food Advanced Manufacturing Equipment Technology, School of Mechanical Engineering, Jiangnan University, Wuxi 214122, China. Electronic address:
Cellulose-based triboelectric nanogenerators (TENGs) have garnered significant attention in wearable electronics due to their biodegradability and abundant availability. However, the near-electroneutrality of cellulose hinders its advancement and broader application in high-performance TENGs. In this study, the triboelectric polarity of cellulose nanofibers (CNF) is modified by grafting different functional groups, wherein the incorporation of polar sulfonic acid groups enhances the deep trap density on the surface of CNF by an order of magnitude, reduces charge dissipation rates, and increases surface potential by nearly 200 % compared to untreated CNF.
View Article and Find Full Text PDFLangmuir
September 2025
Department of Materials Science and Engineering, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110016, India.
This study presents a novel photovoltaic triboelectric nanogenerator (PTENG) that operates on sliding contacts between n-type (gallium arsenide) GaAs and metal electrodes in the presence of periodic light illumination, which offers harvesting energy synergistically by integrating both photovoltaic and triboelectric effects to enhance the energy output. Using an in-house built test setup with provision of laser illumination, the open-circuit voltage () and short-circuit current () were measured for the n-GaAs semiconductors with different metal contacts (Al and Cu). Under both laser light (630 nm) and without laser light conditions, n-GaAs with aluminum contacts exhibited the highest and values, reaching up to 11.
View Article and Find Full Text PDFNano Lett
September 2025
Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industry and Food Engineering, Guangxi University, Nanning, 530004, China.
High-strength cellulose materials, endowed with both biocompatibility and lightweight characteristics, are accelerating the advancement of artificial intelligence technologies in wearable electronics. However, the abundance of hydroxyl groups on cellulose surfaces imparts pronounced hydrophilicity, severely constraining the cellulose's wet strength. This study proposes a noncovalent bonding strategy based on hydrogen bonding and electrostatic interactions and develops a Janus-type cellulose triboelectric material with an asymmetric wettability.
View Article and Find Full Text PDFJ Colloid Interface Sci
September 2025
College of Control Science and Engineering, China University of Petroleum (East China), Qingdao 266580, China. Electronic address:
Solid-liquid triboelectric nanogenerators (SL-TENGs) have attracted attention for use in water resource collection. However, traditional methods limit improvements in the surface energy density of the friction layer because of insufficient precision. This study used femtosecond laser technology to create three-dimensional bionic structures on polyvinylidene fluoride (PVDF) films.
View Article and Find Full Text PDFACS Appl Mater Interfaces
September 2025
School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China.
Triboelectric nanogenerators (TENGs) are typically constrained to operate below 200 °C due to the thermionic emission effect and material degradation at high temperatures. Herein, high-temperature-resistant fluorinated polyimide nanofibers (4,4'-(hexafluoroisopropylidene) diphthalic anhydride-4,4'-oxidianiline/2,2″-bis(trifluoromethyl)benzidine, 6FDA-ODA/TFDB) were designed to mitigate the thermionic emission effect through the introduction of trifluoromethyl (-CF) groups. 6FDA-ODA/TFDB nanofibers exhibited a fine fiber structure and a large highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) gap, which enhanced its effective contact area and maintained more localized states for charge transfer.
View Article and Find Full Text PDF