Salt solution etching to construct micro-gullies on the surface of Zn anodes enhances anodes performance in aqueous zinc-ion batteries.

J Colloid Interface Sci

Key Laboratory of Polymer and Catalyst Synthesis Technology of Liaoning Province, School of Environmental and Chemical Engineering, Shenyang University of Technology, Shenyang 110870, China. Electronic address:

Published: January 2024


Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Aqueous zinc-ion batteries (AZIBs) have caused significant research attention due to their low redox potential of 0.76 V, high theoretical capacity of 820 mAh g. However, the dendrite growth of zinc anode and the side reactions caused by water seriously affect the cycle life of AZIBs. To solve the above problems, a new method of etching zinc anodes with CuCl salt solution was designed, which the zinc anode was named CZn. The process resulted to a uniformly distributed micro gully morphology on the zinc surface, and providing an increased number of nucleation sites for zinc deposition and reducing local current density. The calculation results of exchange current density and activation energy show that CZn has stronger Zn/Zn kinetic effect. At a current density of 5 mA cm and an area capacity of 5 mAh cm, cycle life of the CZn symmetrical cell can reach 500 h, which is more than seven times that of the raw Zn symmetrical cell. This work proposes a simple method of zinc anode protection, which provides a new idea for zinc metal anode protection.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jcis.2023.09.039DOI Listing

Publication Analysis

Top Keywords

zinc anode
12
current density
12
salt solution
8
aqueous zinc-ion
8
zinc-ion batteries
8
cycle life
8
symmetrical cell
8
anode protection
8
zinc
7
solution etching
4

Similar Publications

Economically viable and biologically compatible amino acids demonstrate significant potential as electrolyte microstructure modifiers in aqueous zinc-ion batteries (AZIBs). Compared to polar amino acids, nonpolar amino acids simultaneously own zincophilicity and hydrophobicity, showing great potential in the industrial application of AZIBs. However, nonpolar amino acids have been comparatively understudied in existing research investigations.

View Article and Find Full Text PDF

The denitrogenation of tetrazoles is typically performed using transition-metal catalysts at high temperatures due to the inherent stability of the tetrazole group. In this work, we present, for the first time, an electrochemical method for denitrogenating tetrazoles at room temperature. This method employs a sacrificial zinc anode and a platinum cathode in a solvent mixture of acetonitrile and water under a constant current in an undivided cell.

View Article and Find Full Text PDF

This study systematically investigates the role of nitrogen annealing in enhancing the structural and electrochemical properties of ZnNiO/NF composite anode materials synthesized via hydrothermal methods. By comparing air-annealed and nitrogen-annealed (400 and 600 °C) samples, it is demonstrated that nitrogen annealing at 400 °C induces the densely stacked nanosheet morphology with optimized lattice regularity, which can significantly improve the charge transport kinetics and the interfacial stability. Electrochemical evaluations reveal an outstanding initial discharge capacity of 1873.

View Article and Find Full Text PDF

Gravitational and Magnetic Bi-Field Assisted One-Step Quick Fabrication of Implantable Micro Zn-Ion Hybrid Supercapacitor.

Adv Healthc Mater

September 2025

Energy Storage Institute of Lanzhou University of Technology, School of Materials Science and Engineering, State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology, Lanzhou, 730050, China.

The rapid advancement of implantable medical electronic devices has spurred substantial research into implantable energy storage systems. However, the presence of multiple film resistors in traditional sandwich structures impedes further enhancements in the electrochemical performance of supercapacitors and may result in contact failures between electrodes and separators or catastrophic short-circuit failures during tissue deformation. This study introduces a novel approach for fabricating all-in-one Zn-ion hybrid supercapacitors, which effectively mitigates performance degradation and safety concerns arising from interfacial issues.

View Article and Find Full Text PDF

Carbon-based catalysts with free-standing structure are essential for rechargeable zinc-air battery as electrodes, which can avoid the side effects brought by organic binder. However, the current preparation methods still can be improved for faster preparation process and morphology control. In this study, we reported a fabrication strategy of self-standing carbon catalyst loaded with CoFe nanoparticles and carbon nanotube as air electrodes for liquid rechargeable zinc-air battery.

View Article and Find Full Text PDF