Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
A novel resource utilization of the calcium-based semi-dry flue gas desulfurization ash is investigated. In the present study, the semi-dry desulfurization ash is used as a reductant for chromium and vanadium removal by chemical reduction precipitation, the byproduct gypsum and chromium-contained sludge are obtained. Besides, the effects of main operational parameters (reaction pH, desulfurization ash dosage and reaction time) on the heavy metal removal are investigated, and the main reaction mechanism for this treatment technology is also proposed. Under the optimal conditions, the residual concentrations of Cr(VI), total Cr and V are 0.163mg/L, 0.395mg/L and 0.155mg/L, respectively. Additionally, byproduct gypsum and chromium-contained sludge are characterized using X-ray diffraction (XRD), fourier transform infrared spectroscopy (FT-IR), scanning electron microscope-energy dispersive spectrometer (SEM-EDS) and thermogravimetry differential scanning calorimetry (TG-DSC), respectively. Finally, the resource utilization methods of the byproduct gypsum and chromium-contained sludge from this technology are also submitted. The byproduct gypsum can be utilized to produce hemihydrate calcium sulfate whisker, and the roasted heavy metal precipitation can be used as a primary chromium raw material (CrO content is about 83%).
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jhazmat.2017.08.060 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Innovative Development of Low Carbon Cementitious Materials Based on Magnesium Smelting Slag by the Response Surface Method: Chemical Activation, Hydration Characteristics and Application.
Langmuir
August 2025
College of Materials Science and Engineering, South China University of Technology, Guangzhou, Guangdong 510641, China.
The swift expansion of the worldwide magnesium industry has resulted in substantial accumulation of magnesium slag (MS) as a byproduct of the magnesium metal smelting process, presenting a growing environmental hazard. To effectively address the issue of MS resource usage, the synergistic activation impact among MS, fly ash (FA), and desulfurized gypsum (DG) was examined utilizing response surface methodology (RSM). This study calculated the appropriate ratio of cementitious materials and investigated the hydration characteristics of magnesium-slag-based low-carbon cementitious materials (MSLCM).
View Article and Find Full Text PDFStrength and permeability performance of excavated waste mud stabilized with ternary industrial byproducts.
Sci Rep
August 2025
College of Materials Science and Engineering, Hohai University, Changzhou, 213200, China.
To address the dual challenges of improving strength and reducing permeability in solidified soils produced from excavated waste mud, this study develops a sustainable stabilization method using industrial by-products. A ternary solid waste-based cementitious material (SWC), consisting of ground granulated blast furnace slag (GGBS), steel slag (SS), and desulfurization gypsum (DG), was optimized through an extreme vertex mixture design. The results demonstrate that, under appropriate mix proportions, the solidified soil using SWC can achieve comparable unconfined compressive strength (UCS) at 7 d and superior strength at 28 d compared to ordinary Portland cement (OPC).
View Article and Find Full Text PDFMechanistic Insights into Full Solid-Waste Activators for Enhancing the Performance of Blast Furnace Slag-Fly Ash Cementitious Composites.
Materials (Basel)
July 2025
Gansu Provincial Transportation Planning Survey & Design Institute Co., Ltd., Lanzhou 730030, China.
To address the practical limitations of conventional alkaline activators (e.g., handling hazards, cost) and promote the resource utilization of industrial solid wastes, this study developed a novel all-solid-waste activator system comprising soda residue (SR) and carbide slag (CS).
View Article and Find Full Text PDFExperimental Study on the Preparation of Paste Filling Materials from Coal-Based Solid Wastes.
Materials (Basel)
July 2025
Huaneng Coal Co., Ltd., Beijing 100070, China.
To reduce the cost of coal mine filling materials, a novel composite cementitious material was developed by utilizing coal-based solid waste materials, including fly ash, desulfurized gypsum, and carbide slag, along with cement and water as raw materials. Initially, a comprehensive analysis of the physical and chemical properties of each raw material was conducted. Subsequently, proportioning tests were systematically carried out using the single-variable method.
View Article and Find Full Text PDFAn inventory of industrial solid waste in 337 cities of China: Applying machine learning for data completion.
Sci Data
July 2025
College of Environmental Science and Engineering, Tongji University, Shanghai, 200092, P.R. China.
Rapid industrialization of China generated a massive quantity of waste, among them industrial solid waste contributed the biggest flow to some 60 gigatonnes (Gt) in the past two decades. A complete tempo-spatial dataset of industrial waste, however, is absent in many areas in China, due to numerous waste producers and insufficient statistical coverage. To fill up the gap, we collected current available data from thousands of sources.
View Article and Find Full Text PDF