Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
Unlabelled: A scalable, hysteresis-free and planar architecture perovskite solar cell is presented, employing a flame spray synthesized low-temperature processed NiO (LT-NiO) as hole-transporting layer yielding efficiencies close to 18%. Importantly, it is found that LT-NiO boosts the limits of open-circuit voltages toward an impressive non-radiative voltage loss of 0.226 V only, whereas
Pedot: PSS suffers from significant large non-radiative recombination losses.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/adma.201504168 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Electrolyte-Driven Cu Substitution in MoSe: Synergy of an Inorganic-Rich Solid Electrolyte Interphase and Thermal Activation for Sodium-Ion Batteries.
ACS Nano
September 2025
Key Laboratory of Applied Surface and Colloid Chemistry (Ministry of Education), School of Chemistry and Chemical Engineering, Shaanxi Normal University, Xi'an 710119, P. R. China.
Transition metal chalcogenides (TMCs) have garnered significant attention as high-capacity anode materials, yet the unconventional role of the Cu collector meditating atomic-level substitution of metal-site cations by Cu ions during electrochemical cycling remains mechanistically unclear. To address this, herein, Cu-doped MoSe@C ultrathin nanosheets were synthesized via the solvothermal process and carbonization strategies. A systematic investigation was conducted to elucidate the underlying driving forces for Cu substitution at Mo sites and the crucial regulatory effects of solid electrolyte interphase (SEI) formation.
View Article and Find Full Text PDFFingerprinting Single and Clustered Cu Sites in Metalated MOF Catalysts via TD-DFT and In Situ Diffuse Reflectance UV-Vis Spectroscopy.
ACS Appl Mater Interfaces
September 2025
Leibniz-Institut für Katalyse e.V. (LIKAT), Albert-Einstein-Str. 29a, Rostock 18059, Germany.
Metal-organic frameworks (MOFs) are transformative platforms for heterogeneous catalysis, but distinguishing atomically dispersed metal sites from subnanometric clusters remains a major challenge. This often demands the integration of multiple characterization techniques, many of which either lack the resolving power to distinguish active sites from their surrounding environments (e.g.
View Article and Find Full Text PDFSolid-state organic electrochemical transistors.
Mater Horiz
September 2025
Faculty of Science, School of Chemistry and Physics, Queensland University of Technology (QUT), Brisbane, QLD 4000, Australia.
Organic electrochemical transistors (OECTs) continue to be the subject of much detailed and systematic study, being suitable for a diverse range of applications including bioelectronics, sensors, and neuromorphic computing. OECTs conventionally use a liquid electrolyte, and this architecture is well suited for sensing or bio-interfacing applications where biofluids or liquid samples can be used directly as the electrolyte. A more recent trend is solid-state OECTs, where a solid or semi-solid electrolyte such as an ion gel, hydrogel or polyelectrolyte replaces the liquid component for an all-solid-state device.
View Article and Find Full Text PDFThermoresponsive dynamic wet-adhesive epidermal interface for motion-robust multiplexed sweat biosensing.
Biosens Bioelectron
September 2025
Tianjin Key Laboratory of Life and Health Detection, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin, 300384, PR China. Electronic address:
Wearable sweat sensors offer noninvasive health monitoring through multiplexed biomarker analysis, delivering real-time diagnostics with continuous operational capability. However, chronic cutaneous interface hydration during prolonged monitoring induces adhesive delamination phenomena that manifest as signal attenuation, which fundamentally limits their clinical reliability. To address this challenge, we developed a thermodynamically adaptive polymer interface combining three functional components: mussel-inspired catechol moieties for moisture-tolerant adhesion, hydrophobic acrylates ensuring mechanical stability, and N-isopropylacrylamide enabling thermal responsiveness.
View Article and Find Full Text PDFNanohybrid Hydrogels Spatiotemporally Restore Infectious Bone Defects via Mitochondrial Homeostasis-Driven Immunomodulation and Vascular-Bone Coupling Synergy.
ACS Appl Mater Interfaces
September 2025
Research Center for Nano-Biomaterial, Analytical and Testing Center, Sichuan University, Chengdu 610065, China.
Regeneration of infected bone defects (IBDs) requires biomaterials capable of dynamically coordinating antimicrobial, anti-inflammatory, and osteogenic functions. Overcoming the spatiotemporal mismatches in treating IBDs remains a critical challenge. Here, we designed a temporally controlled therapy based on gelatin methacrylate (GelMA)-based nanocomposite hydrogels (GCS) coembedded with sulfur quantum dots (SQDs) nanoenzymes and calcium-phosphorus oligomers (CPOs.
View Article and Find Full Text PDF