Thermodynamically Coupled Three-Enzyme Cascade Converts Styrene to Cinnamic Acid, l-Phenylalanine, and Phenylpyruvate via CO Fixation without External Energy Cofactors.

We report the development of a cofactor-free CO fixation platform based on a three-enzyme cascade comprising ferulic acid decarboxylase (AnFDC), phenylalanine ammonia-lyase (AvPAL), and l-amino acid deaminase (PmLAAD). Unlike canonical ATP- or NADPH-dependent CO assimilation pathways, this system uses a prFMN-dependent carboxylation mechanism, enabling efficient CO incorporation under ambient conditions without energy-intensive cofactors. Systematic screening identified AnFDC as the optimal decarboxylase for styrene carboxylation, while AvPAL and PmLAAD were selected for their superior catalytic efficiencies in the cascade.

Integrated cascade biocatalysis of cannabigerolic acid through cyclodextrin-mediated stabilization and prenyltransferase engineering.

Cannabigerolic acid (CBGA) is a key precursor for therapeutic cannabinoids, but its sustainable production is limited by enzymatic instability and costly cofactors. Here, integrated bioprocess enabled efficient CBGA biosynthesis. Cyclodextrin-mediated stabilization enhanced in vitro CBGA yield by 7-fold to 4 mM by reducing enzymatic degradation.

Post-Transplant Lymphoproliferative Disorder Presenting as Biventricular Failure After Heart Transplantation.

Background: The diagnosis of post-transplant lymphoproliferative disorder (PTLD) is challenging because of its diverse clinical presentations.

Case Summary: A 65-year-old man, previously stable 61 months after heart transplantation for dilated cardiomyopathy, presented with biventricular failure and worsening dyspnea. Given the acute decline in graft function, acute rejection was suspected, and rejection therapy was initiated.

Elucidation of Broad Substrate Specificity of a Novel γ-Glutamyl Transferase from and Rational Design for Enhanced Substrate Selectivity.

γ-Glutamyl methionine (γ-Glu-Met) is a potential kokumi substance as a food ingredient with an exceptionally low taste threshold. This study proposes the γ-glutamyl transferase from (BaGGT) as a superior enzyme that outperforms other candidates including previously reported enzymes. BaGGT displayed a superior specific activity (413 U/mg) for l-methionine (Met) under 20:1 molar ratio of Met to l-glutamine (Gln), highlighting its potentiality as a highly efficient catalyst for γ-Glu-Met production.

Facile Strategy for Reducing Cell-to-Module Efficiency Gap in Organic Solar Cells by Controlling the Preaggregation of Photoactive Solutions.

Organic solar cells (OSCs) have recently achieved efficiencies of >20% in single-junction unit cells owing to rapid advancements in materials and device technologies. Large-area OSCs face several challenges that adversely affect their efficiency compared to small unit cells. These challenges include increased resistance loads derived from their larger dimensions, as well as limitations related to morphology, miscibility, and crystallinity.

Size-Dependent Electrostatic Adsorption of Polymer-Grafted Gold Nanoparticles on Polyelectrolyte Brushes.

Designing a functional surface that selectively adsorbs nanoparticles based on their size and shape is essential for developing an advanced adsorption-based, postsynthesis nanoparticle separation device. We demonstrate selective adsorption of larger nanoparticles from solution onto a polyelectrolyte brush by tuning the salt concentration. Specifically, a positively charged polyelectrolyte brush is created by converting pyridine groups of poly(2-vinylpyridine) to -methylpyridinium groups using methyl iodide.

Biocatalysis enables the scalable conversion of biobased furans into various furfurylamines.

Biobased furans have emerged as chemical building blocks for the development of materials because of their diverse scaffolds and as they can be directly prepared from sugars. However, selective, efficient, and cost-effective scalable conversion of biobased furans remains elusive. Here, we report a robust transaminase (TA) from Shimia marina (SMTA) that enables the scalable amination of biobased furanaldehydes with high activity and broad substrate specificity.

One-Pot Biocatalytic Route from Alkanes to α,ω-Diamines by Whole-Cell Consortia of Engineered and .

Metabolically engineered microbial consortia can contribute as a promising production platform for the supply of polyamide monomers. To date, the biosynthesis of long-chain α,ω-diamines from -alkanes is challenging because of the inert nature of -alkanes and the complexity of the overall synthesis pathway. We combined an engineered module with modules to obtain a mixed strain microbial consortium that could catalyze an efficient biotransformation of -alkanes into corresponding α,ω-diamines.

Controlling spatial distribution of functional lipids in a supported lipid bilayer prepared from vesicles.

Conjugating biomolecules, such as antibodies, to bioconjugate moieties on lipid surfaces is a powerful tool for engineering the surface of diverse biomaterials, including cells and nanoparticles. We developed supported lipid bilayers (SLBs) presenting well-defined spatial distributions of functional moieties as models for precisely engineered functional biomolecular-lipid surfaces. We used quartz crystal microbalance with dissipation (QCM-D) and atomic force microscopy (AFM) to determine how vesicles containing a mixture of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) and 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[azido(polyethylene glycol)-2000] (DSPE-PEG-N) form SLBs as a function of the lipid phase transition temperature (T).

A 3-Fluoropyridine Manipulating the Aggregation and Fibril Network of Donor Polymers for Eco-Friendly Solution-Processed Versatile Organic Solar Cells.

The development of eco-friendly solvent-processed organic solar cells (OSCs) suitable for industrial-scale production should be now considered the imperative research. Herein, asymmetric 3-fluoropyridine (FPy) unit is used to control the aggregation and fibril network of polymer blends. Notably, terpolymer PM6(FPy = 0.

pH-Mediated Size-Selective Adsorption of Gold Nanoparticles on Diblock Copolymer Brushes.

Precise control of nanoparticles at interfaces can be achieved by designing stimuli-responsive surfaces that have tunable interactions with nanoparticles. In this study, we demonstrate that a polymer brush can selectively adsorb nanoparticles according to size by tuning the pH of the buffer solution. Specifically, we developed a facile polymer brush preparation method using a symmetric polystyrene--poly(2-vinylpyridine) (PS--P2VP) block copolymer deposited on a grafted polystyrene layer.

Biosynthesis of aliphatic plastic monomers with amino residues in .

The α,ω-diamines (NH-(CH)-NH) and ω -amino fatty acids (NH-(CH)-COOH) have been widely used as building blocks in polymerindustries. Medium- to long-chain (C to C) fatty acid monomers with amino residues are almost exclusively produced chemical processes that generate hazardous waste and induce severe environmental problems, such as global warming and pollution. Here, we present the construction platformstrains of a cheese-ripening yeast, for direct biotransformation of hydrocarbons into medium- to long-chain α,ω-diamines and ωamino fatty acids using metabolic engineering of endogenous fatty acid ω- and β-oxidation pathways and introducing heterologous ω-transaminase in .

Zwitterionic surface chemistry enhances detachment of bacteria under shear.

The ubiquitous nature of microorganisms, especially of biofilm-forming bacteria, makes biofouling a prevalent challenge in many settings, including medical and industrial environments immersed in liquid and subjected to shear forces. Recent studies have shown that zwitterionic groups are effective in suppressing bacteria and protein adhesion as well as biofilm growth. However, the effect of zwitterionic groups on the removal of surface-bound bacteria has not been extensively studied.

A Single Crystal 2D Hexagonal Array in a Centimeter Scale with a Self-Directed Assembly of Diblock Copolymer Spheres.

The creation of a single-grain two-dimensional (2D) nanoarray over a large area (∼1 cm) has been only realized with expensive lithographic fabrication involving a complicated multichemical process. In this work, we report the production of a highly aligned single-grain 2D crystalline nanoarray over a centimeter-scale large area with a concept of self-directed assembly (SDA) in block copolymer (BCP) thin films. No lithographic guiding pattern is employed in SDA.

Cu(In,Ga)Se Solar Cells Integrated with Subwavelength Structured Cover Glass Fabricated by One-Step Self-Masked Etching.

We report an anti-reflective cover glass for Cu(In,Ga)Se (CIGS) thin film solar cells. Subwavelength structures (SWSs) were fabricated on top of a cover glass using one-step self-masked etching. The etching method resulted in dense whiskers with high aspect ratio.

Luminescent down-shifting CsPbBr perovskite nanocrystals for flexible Cu(In,Ga)Se solar cells.

To overcome the parasitic absorption of ultraviolet (UV) light in the transparent conductive oxide (TCO) layer of flexible Cu(In,Ga)Se2 (CIGS) thin film solar cells, a CsPbBr3 perovskite nanocrystal based luminescent down-shifting (LDS) layer was integrated on CIGS solar cells fabricated on a stainless steel foil. The CsPbBr3 perovskite nanocrystal absorbs solar irradiation at wavelengths shorter than 520 nm and emits photons at a wavelength of 532 nm. These down-shifted photons pass the TCO layer without parasitic absorption and are absorbed in the CIGS absorber layer where they generate photocurrent.

Shear-solvo defect annihilation of diblock copolymer thin films over a large area.

Achieving defect-free block copolymer (BCP) nanopatterns with a long-ranged orientation over a large area remains a persistent challenge, impeding the successful and widespread application of BCP self-assembly. Here, we demonstrate a new experimental strategy for defect annihilation while conserving structural order and enhancing uniformity of nanopatterns. Sequential shear alignment and solvent vapor annealing generate perfectly aligned nanopatterns with a low defect density over centimeter-scale areas, outperforming previous single or sequential combinations of annealing.

Fabrication of gold nanowires in micropatterns using block copolymers.

In this work, we introduce a facile method for fabricating well-aligned gold nanowires in a desired microstructure by combining the shear alignment of block copolymer (BCP) cylinders with a conventional lithography process. The aligned line patterns in a long-range order were firstly created with the shear alignment of cylinder-forming polystyrene--poly(2-vinylpyridine) thin films; then, gold was loaded to create metal nanowires. We directly employed photolithography on the nanopatterns, which simplified many fabrication steps.

Ultrawide Spectral Response of CIGS Solar Cells Integrated with Luminescent Down-Shifting Quantum Dots.

Conventional Cu(In,Ga)Se (CIGS) solar cells exhibit poor spectral response due to parasitic light absorption in the window and buffer layers at the short wavelength range between 300 and 520 nm. In this study, the CdSe/CdZnS core/shell quantum dots (QDs) acting as a luminescent down-shifting (LDS) layer were inserted between the MgF antireflection coating and the window layer of the CIGS solar cell to improve light harvesting in the short wavelength range. The LDS layer absorbs photons in the short wavelength range and re-emits photons in the 609 nm range, which are transmitted through the window and buffer layer and absorbed in the CIGS layer.

Controlled Segmentation of Metal Nanowire Array by Block Copolymer Lithography and Reversible Ion Loading.

Spatial arrangement of 1D nanomaterials may offer enormous opportunities for advanced electronics and photonics. Moreover, morphological complexity and chemical diversity in the nanoscale components may lead to unique properties that are hardly anticipated in randomly distributed homogeneous nanostructures. Here, controlled chemical segmentation of metal nanowire arrays using block copolymer lithography and subsequent reversible metal ion loading are demonstrated.

All-solid-state reduced graphene oxide supercapacitor with large volumetric capacitance and ultralong stability prepared by electrophoretic deposition method.

Portable energy storage devices have gained special attention due to the growing demand for portable electronics. Herein, an all-solid-state supercapacitor is successfully fabricated based on a poly(vinyl alcohol)-H3PO4 (PVA-H3PO4) polymer electrolyte and a reduced graphene oxide (RGO) membrane electrode prepared by electrophoretic deposition (EPD). The RGO electrode fabricated by EPD contains an in-plane layer-by-layer alignment and a moderate porosity that accommodate the electrolyte ions.