A selective LSPR biosensor for molecular-level glycated albumin detection.

A biosensor specifically engineered to detect glycated albumin (GA), a critical biomarker for diabetes monitoring, is presented. Unlike conventional GA monitoring methods, the biosensor herein uniquely employs localised surface plasmon resonance (LSPR) for signal transduction, leveraging a novel fabrication process where gold nanoparticles are deposited on a quartz substrate using flame spray pyrolysis. This enables the biosensor to provide mean glucose levels over a three-week period, correlating with the glycation status of diabetes patients.

Machine learning for detecting DNA attachment on SPR biosensor.

Optoelectric biosensors measure the conformational changes of biomolecules and their molecular interactions, allowing researchers to use them in different biomedical diagnostics and analysis activities. Among different biosensors, surface plasmon resonance (SPR)-based biosensors utilize label-free and gold-based plasmonic principles with high precision and accuracy, allowing these gold-based biosensors as one of the preferred methods. The dataset generated from these biosensors are being used in different machine learning (ML) models for disease diagnosis and prognosis, but there is a scarcity of models to develop or assess the accuracy of SPR-based biosensors and ensure a reliable dataset for downstream model development.

Unsupervised machine learning discovers classes in aluminium alloys.

Aluminium (Al) alloys are critical to many applications. Although Al alloys have been commercially widespread for over a century, their development has predominantly taken a trial-and-error approach. Furthermore, many discrete studies regarding Al alloys, often application specific, have precluded a broader consolidation of Al alloy classification.

Ultrastrong nanotwinned titanium alloys through additive manufacturing.

Titanium alloys, widely used in the aerospace, automotive and energy sectors, require complex casting and thermomechanical processing to achieve the high strengths required for load-bearing applications. Here we reveal that additive manufacturing can exploit thermal cycling and rapid solidification to create ultrastrong and thermally stable titanium alloys, which may be directly implemented in service. As demonstrated in a commercial titanium alloy, after simple post-heat treatment, adequate elongation and tensile strengths over 1,600 MPa are achieved.

Gallium-Strontium Phosphate Conversion Coatings for Promoting Infection Prevention and Biocompatibility of Magnesium for Orthopedic Applications.

Device-associated infections remain a clinical challenge. The common strategies to prevent bacterial infection are either toxic to healthy mammalian cells and tissue or involve high doses of antibiotics that can prompt long-term negative consequences. An antibiotic-free coating strategy to suppress bacterial growth is presented herein, which concurrently promotes bone cell growth and moderates the dissolution kinetics of resorbable magnesium (Mg) biomaterials.

Improved intergranular corrosion resistance of Al-Mg-Mn alloys with Sc and Zr additions.

Al-5.8Mg-0.4Mn with minor alloying additions of Sc and Zr was investigated via electrochemical testing and nitric acid mass loss testing (NAMLT) in order to reveal the influence of Sc and Zr upon sensitization and intergranular corrosion.

Ion Agglomeration and Transport in MgCl-Based Electrolytes for Rechargeable Magnesium Batteries.

Magnesium halide salts are an exciting prospect as stable and high-performance electrolytes for rechargeable Mg batteries (RMBs). By nature of their complex equilibria, these salts exist in solution as a variety of electroactive species (EAS) in equilibrium with counterions such as AlCl. Here we investigated ion agglomeration and transport of several such EAS in MgCl salts dissolved in ethereal solvents under both equilibrium and operating conditions using large-scale atomistic simulations.

Understanding the effects of PBF process parameter interplay on Ti-6Al-4V surface properties.

Ti-6Al-4V is commonly used in orthopaedic implants, and fabrication techniques such as Powder Bed Fusion (PBF) are becoming increasingly popular for the net-shape production of such implants, as PBF allows for complex customisation and minimal material wastage. Present research into PBF fabricated Ti-6Al-4V focuses on new design strategies (e.g.

Precipitation strengthening in an ultralight magnesium alloy.

Body-centred cubic magnesium-lithium-aluminium-base alloys are the lightest of all the structural alloys, with recently developed alloy compositions showing a unique multi-dimensional property profile. By hitherto unrecognised mechanisms, such alloys also exhibit exceptional immediate strengthening after solution treatment and water quenching, but strength eventually decreases during prolonged low temperature ageing. We show that such phenomena are due to the precipitation of semi-coherent D0-MgAl nanoparticles during rapid cooling followed by gradual coarsening and subsequent loss of coherency.

Atomistic Mechanisms of Mg Insertion Reactions in Group XIV Anodes for Mg-Ion Batteries.

Magnesium (Mg) metal has been widely explored as an anode material for Mg-ion batteries (MIBs) owing to its large specific capacity and dendrite-free operation. However, critical challenges, such as the formation of passivation layers during battery operation and anode-electrolyte-cathode incompatibilities, limit the practical application of Mg-metal anodes for MIBs. Motivated by the promise of group XIV elements (namely, Si, Ge, and Sn) as anodes for lithium- and sodium-ion batteries, here, we conduct systematic first-principles calculations to explore the thermodynamics and kinetics of group XIV anodes for MIBs and to identify the atomistic mechanisms of the electrochemical insertion reactions of Mg ions.

An Examination of the Composition and Microstructure of Coarse Intermetallic Particles in AA2099-T8, Including Li Detection.

Electron and proton microprobes, along with electron backscatter diffraction (EBSD) analysis were used to study the microstructure of the contemporary Al-Cu-Li alloy AA2099-T8. In electron probe microanalysis, wavelength and energy dispersive X-ray spectrometry were used in parallel with soft X-ray emission spectroscopy (SXES) to characterize the microstructure of AA2099-T8. The electron microprobe was able to identify five unique compositions for constituent intermetallic (IM) particles containing combinations of Al, Cu, Fe, Mn, and Zn.

Super-formable pure magnesium at room temperature.

Magnesium, the lightest structural metal, is difficult to form at room temperature due to an insufficient number of deformation modes imposed by its hexagonal structure and a strong texture developed during thermomechanical processes. Although appropriate alloying additions can weaken the texture, formability improvement is limited because alloying additions do not fundamentally alter deformation modes. Here we show that magnesium can become super-formable at room temperature without alloying.

The effect of absorbed hydrogen on the dissolution of steel.

Atomic hydrogen (H) was introduced into steel (AISI 1018 mild steel) by controlled cathodic pre-charging. The resultant steel sample, comprising about 1 ppmw diffusible H, and a reference uncharged sample, were studied using atomic emission spectroelectrochemistry (AESEC). AESEC involved potentiodynamic polarisation in a flowing non-passivating electrolyte (0.

Effect of water presence on choline chloride-2urea ionic liquid and coating platings from the hydrated ionic liquid.

In the present study, hygroscopicity of the choline chloride-urea (ChCl-2Urea) ionic liquid (IL) was confirmed through Karl-Fisher titration examination, indicating that the water content in the hydrated ChCl-2Urea IL was exposure-time dependent and could be tailored by simple heating treatment. The impact of the absorbed water on the properties of ChCl-2Urea IL, including viscosity, electrical conductivity, electrochemical window and chemical structure was investigated. The results show that water was able to dramatically reduce the viscosity and improve the conductivity, however, a broad electrochemical window could be persisted when the water content was below ~6 wt.

Osteoanabolic Implant Materials for Orthopedic Treatment.

Osteoporosis is becoming more prevalent due to the aging demographics of many populations. Osteoporotic bone is more prone to fracture than normal bone, and current orthopedic implant materials are not ideal for the osteoporotic cases. A newly developed strontium phosphate (SrPO4 ) coating is reported herein, and applied to Ti-29Nb-13Ta-4.

In vitro evaluation of biodegradable magnesium alloys containing micro-alloying additions of strontium, with and without zinc.

The in vitro degradation of magnesium (Mg) alloys containing low levels of strontium (Sr, 0.05, 0.1 and 0.

A high-specific-strength and corrosion-resistant magnesium alloy.

Ultra-lightweight alloys with high strength, ductility and corrosion resistance are desirable for applications in the automotive, aerospace, defence, biomedical, sporting and electronic goods sectors. Ductility and corrosion resistance are generally inversely correlated with strength, making it difficult to optimize all three simultaneously. Here we design an ultralow density (1.

In situ synchrotron X-ray diffraction investigation of the evolution of a PbO₂/PbSO₄ surface layer on a copper electrowinning Pb anode in a novel electrochemical flow cell. Corrigendum.

Figures 7 and 8 of the article by Clancy et al. [(2015), J. Synchrotron Rad.

Controlling factors in localised corrosion morphologies observed for magnesium immersed in chloride containing electrolyte.

The early stages of localised corrosion affecting magnesium (Mg) surfaces when immersed in aqueous sodium chloride (NaCl) solutions involves the propagation of dark regions, within which both anodic metal dissolution and cathodic hydrogen evolution occur. For nominally "pure" Mg, these dark areas can either take the form of discs which expand radially with time, or filiform-like tracks which lengthen with time. For Mg surfaces which display disc-form corrosion features in concentrated NaCl electrolyte, a transition to filiform corrosion (FFC) is observed as the concentration is decreased, indicating ohmic constraints on radial propagation.

In situ synchrotron X-ray diffraction investigation of the evolution of a PbO₂/PbSO₄ surface layer on a copper electrowinning Pb anode in a novel electrochemical flow cell.

This paper describes the quantitative measurement, by in situ synchrotron X-ray diffraction (S-XRD) and subsequent Rietveld-based quantitative phase analysis and thickness calculations, of the evolution of the PbO2 and PbSO4 surface layers formed on a pure lead anode under simulated copper electrowinning conditions in a 1.6 M H2SO4 electrolyte at 318 K. This is the first report of a truly in situ S-XRD study of the surface layer evolution on a Pb substrate under cycles of galvanostatic and power interruption conditions, of key interest to the mining, solvent extraction and lead acid battery communities.

Revisiting the electrochemical impedance spectroscopy of magnesium with online inductively coupled plasma atomic emission spectroscopy.

The electrochemical impedance of reactive metals such as magnesium is often complicated by an obvious inductive loop with decreasing frequency of the AC polarising signal. The characterisation and ensuing explanation of this phenomenon has been lacking in the literature to date, being either ignored or speculated. Herein, we couple electrochemical impedance spectroscopy (EIS) with online atomic emission spectroelectrochemistry (AESEC) to simultaneously measure Mg-ion concentration and electrochemical impedance spectra during Mg corrosion, in real time.

Biomedical studies on temporal bones of the first multi-channel cochlear implant patient at the University of Melbourne.

Objective: To analyse the temporal bones and implant of the first University of Melbourne's (UOM) patient (MC-1) to receive the multi-channel cochlear prosthesis.

Methods: The left cochlea was implanted with the prototype multi-channel cochlear prosthesis on 1 August 1978, and the Cochlear versions CI-22 and CI-24 on 22 June 1983 and 10 November 1998, respectively. MC-1 died in 2007.