Synergistic Enhancement of Hydrolysis-Oxidation Drives Efficient Catalytic Elimination of Chlorinated Aromatics over VO/TiO Catalysts at Low Temperature.

The efficient catalytic elimination of toxic chlorinated aromatics (i.e., dioxins, chlorobenzenes, etc.

Exploring microfluidics-based organoid interactions through analysis of albumin secretion.

Organoids-on-a-chip exhibit significant potential for advancing disease modeling, drug screening, and precision medicine, largely due to their capacity to facilitate interactions among organoids. However, the influence of chip design on these interactions remains poorly understood, primarily due to our limited knowledge of the mediators of communication and the complexity of interaction dynamics. This study demonstrates that analyzing albumin secretion from liver organoids within an organoids-on-a-chip system can provide a measure of the interaction intensity among organoids, offering valuable insights into how chip design influences these interactions.

Variation profiles, formation mechanisms, and emission risks of brominated flame retardant compounds during cement kiln co-processing of hexabromocyclododecane-containing waste.

Cement kiln co-processing technique has been suggested as a promising disposal method for hexabromocyclododecane (HBCD)-containing construction wastes. However, concerns persist regarding the potential emissions of secondary brominated flame retardant (BFR) compounds. To address this, we conducted both field and laboratory experiments to elucidate the emission characteristics and formation mechanisms of BFRs during the co-processing of HBCD-containing waste in cement kilns.

Priority Organic Pollutant Monitoring Inventory and Relative Risk Reduction Potential for Solid Waste Incineration.

Incineration is a promising sustainable treatment method for solid waste. However, the ongoing revelation of new toxic pollutants in this process has become a controversial issue impeding its development. Thus, identifying and regulating high-risk pollutants emerge as pivotal strides toward reconciling this debate.

Vortexing-generated high throughput single-cell droplets for facile analysis of multiplexed microRNA dynamic secretion.

Discriminating secretory phenotypes provides a direct, intact, and dynamic way to evaluate the heterogeneity in cell states and activation, which is significant for dissecting non-genetic heterogeneity for human health studies and disease diagnostics. In particular, secreted microRNAs, soluble signaling molecules released by various cells, are increasingly recognized as a critical mediator for cell-cell communication and the circulating biomarkers for disease diagnosis. However, single-cell analysis of secreted miRNAs is still lacking due to the limited available tools.

Target Analysis of Polychlorinated Naphthalenes and Nontarget Screening of Organic Chemicals in Bovine Milk, Infant Formula, and Adult Milk Powder by High-Resolution Mass Spectrometry.

Infant formula is intended as an effective substitute for breast milk but is the main source of polychlorinated naphthalenes (PCNs) to nonbreastfed infants. We performed target and nontarget analyses to determine PCNs and identify other organic contaminants in infant formula. The mean PCN concentrations in infant formula, milk powder, and bovine milk were 106.

Deciphering Cell-Cell Interactions with Integrative Single-Cell Secretion Profiling.

Cell-cell interactions are the fundamental behaviors to regulate cellular activities. A comprehensive evaluation of intercellular interactions requires direct profiling of various signaling behaviors simultaneously at the single-cell level, which remains lacking. Herein, an integrative single-cell secretion analysis platform is presented to profile different secreted factors (four proteins, three extracellular vesicles (EV) phenotypes), spatial distances, and migration information (distances and direction) simultaneously from high-throughput paired single cells using an antibody-barcode microchip.

[Emission Characteristics and Control of Heavy Metals in Secondary Copper Smelting Process].

Secondary copper smelting is an important source of heavy metal emission. Flue gas samples were collected from different stages in secondary copper smelters to study the emission characteristics and control of particulate matters (PM) and heavy metals such as Cd, Cr, As, Pb, Sn, and Sb. The mass concentrations of heavy metals in flue gas and fly ash were determined using inductively coupled plasma-mass spectrometry.

Automated and parallel microfluidic DNA extraction with integrated pneumatic microvalves/pumps and reusable open-channel columns.

A novel microfluidic DNA extraction protocol based on integrated diaphragm microvalves/pumps and silica-deposited open-channel columns was developed specifically for automated and parallel DNA solid-phase extraction (SPE). The method uses microfluidic chips with a sandwiched structure containing three layers, which are the upper fluidic layer with surface-deposited silica on glass open channels as the extraction phase, the lower actuation layer with valve actuation channels on a glass wafer, and the middle poly(dimethylsiloxane) (PDMS) membrane for reversible bonding of the two glass substrates. These two glass substrates can be reused after thoroughly cleaning and the PDMS membrane can be replaced conveniently, which could effectively decrease the time and cost of chip manufacturing.

Free radical mechanism of toxic organic compound formations from o-chlorophenol.

Organic free radical intermediates are pivotal to our understanding of toxic chemicals formation from chlorophenols that widely exist in thermal processes. However, in most cases, multiple free radical intermediates exist and produce complex spectra that are hard to deconvolute. Identification of free radical intermediates is the current difficulty for detailed formation mechanisms of toxic products from chlorophenols.

Mapping secretome-mediated interaction between paired neuron-macrophage single cells.

Neuron-immune interaction through secreted factors contributes significantly to the complex microenvironment in the central nervous system that could alter cell functionalities and fates in both physiological and pathological conditions, which remains poorly characterized at the single-cell level. Herein, using a spatially patterned antibody barcode microchip, we realized the mapping of 12 different secretomes, covering cytokines, neurotrophic factors (NFs), and neuron-derived exosomes (NDEs) from high-throughput, paired single cells (≥ 600) simultaneously under normal conditions and an Alzheimer's disease (AD) model induced with amyloid beta protein 1-42 (Aβ). We applied the platform to analyze the secretion profiles from paired neuron-macrophage and neuron-microglia single cells with human cell lines.

Concentrations, congener patterns, and correlations of unintentional persistent organic pollutants in cement kilns co-processing hazardous waste.

Emissions from two typical cement kilns co-processing different kind of hazardous waste were analyzed for 143 congeners of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls, polychlorinated naphthalenes, polybrominated dibenzo-p-dioxins and dibenzofurans, and polybrominated diphenyl ethers. The congener distributions in different process stages were investigated. One of the plants co-processed waste chemical reagents from laboratories.

Variation in the formation characteristics of PBDD/F, brominated PAH, and PBDE congeners along the secondary copper smelting processes.

Simultaneous determination of 58 congeners of polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs), brominated polycyclic aromatic hydrocarbons (Br-PAHs), and polybrominated diphenyl ethers (PBDEs) from multiple stages of industrial-scale secondary copper smelting plants was conducted with the aim of understanding their variations and control. In addition to the historical manufacture of PBDEs as brominated flame retardants, this study confirmed that PBDEs can be unintentionally produced and released from the secondary copper industry. The average mass emission factors of PBDD/Fs, PBDEs, and Br-PAHs from different sources were 10.

Spatial barcoding-enabled highly multiplexed immunoassay with digital microfluidics.

Digital microfluidics (DMF), facilitating independent manipulation of microliter samples, provides an ideal platform for immunoassay detection; however, suffering limited multiplexity. To address the need, herein we described a digital microfluidics (DMF) platform that realizes spatial barcoding on the Teflon-coated indium tin oxide (ITO) glass side to fulfill highly multiplexed immunoassay (10+) with low-volume samples (∼4 μL) in parallel, representing the highest multiplexing recorded to date for DMF-actuated immunoassay. Planar-based spatial immobilization of multiple capture antibodies was realized on a Teflon-coated ITO glass side, which was then used as the top plate of the DMF device.

Comprehensive Evaluation of Dietary Exposure and Health Risk of Polychlorinated Naphthalenes.

Intake from food is considered an important route of human exposure to polychlorinated naphthalenes. To our knowledge, several studies have quantified dietary exposure but only in European countries and measuring only a few of the 75 congeners. In addition, the influence of source diversity on human exposure has seldom been assessed.

Angiogenesis and Functional Vessel Formation Induced by Interstitial Flow and Vascular Endothelial Growth Factor Using a Microfluidic Chip.

Angiogenesis occurs during both physiological and pathological processes. In this study, a microfluidic chip for the development of angiogenesis was utilized to assess angiogenic sprouting and functional vessel formation. We also found that vascular endothelial growth factor (VEGF) was a determinant of the initiation of vascular sprouts, while the direction of these sprouts was greatly influenced by interstitial flow.

Core fucosylation involvement in the paracrine regulation of proteinuria-induced renal interstitial fibrosis evaluated with the use of a microfluidic chip.

Proteinuria is a clinical manifestation of chronic kidney disease that aggravates renal interstitial fibrosis (RIF), in which injury of peritubular microvessels is an important event. However, the changes in peritubular microvessels induced by proteinuria and their molecular mechanisms remain unclear. Thus, we aimed to develop a co-culture microfluidic device that contains renal tubules and peritubular microvessels to create a proteinuria model.

High-Throughput Single-Cell Extracellular Vesicle Secretion Analysis on a Desktop Scanner without Cell Counting.

Single-cell EV (extracellular vesicle) secretion analysis is emerging for a better understanding of non-genetic cellular heterogeneity regulating human health and diseases through intercellular mediators. However, the requirements of expensive and bulky instrumentations hinder its widespread use. Herein, by combining gold nanoparticle-enhanced silver staining and the Poisson distribution, we reported the use of a home-use scanner to realize high-throughput single-cell EV secretion analysis without cell counting.

Congener profiles and process distributions of polychlorinated biphenyls, polychlorinated naphthalenes and chlorinated polycyclic aromatic hydrocarbons from secondary copper smelting.

Secondary copper smelting is an important industrial source of unintentionally produced persistent organic pollutants (UPOPs) emissions. Herein, field study on industrial-scale plants was conducted to clarify the levels and profiles of polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs) and chlorinated polycyclic aromatic hydrocarbons (> 3 rings, Cl-PAHs) from secondary copper smelting plants. The three UPOPs emission levels from the oxygen-enriched smelting furnace were higher than that from the anode furnace, which was attributed to the low-grade raw materials used.

A robust and scalable active-matrix driven digital microfluidic platform based on printed-circuit board technology.

Two-dimensional digital microfluidic platforms, on which droplets are actuated by electrowetting on dielectrics, have merits such as dynamic reconfigurability and ease for automation. However, concerns for digital microfluidic platforms based on low-cost printed circuit boards, such as the scalability of the electrode array and the reliability of the device operation, should be addressed before high throughput and fully automatic applications can be realized. In this work we report the progress in addressing those issues by using active-matrix circuitry to automatically drive a large electrode array with enhanced device reliability.

Hydroxyethyl Cellulose As a Rheological Additive for Tuning the Extrusion Printability and Scaffold Properties.

Bioink, a key element of three-dimensional (3D) bioprinting, is frequently engineered to achieve improved printing performance. Viscoelasticity related to rheological properties is correlative of the printability of bioink for extrusion bioprinting, which affects the complexity of printing 3D structures. This article shows the use of hydroxyethyl cellulose (HEC) as a rheological additive for engineering bioink to improve the printability without reducing the biocompatibility.

Photoinduced formation of persistent free radicals, hydrogen radicals, and hydroxyl radicals from catechol on atmospheric particulate matter.

Catechol is speculated to be a potential precursor of environmentally persistent free radicals (EPFRs) in the atmosphere. EPFRs absorbed on PM have attracted public attention because their toxicity is similar to cigarette smoke. In this study, we found that catechol could produce EPFRs, which were oxygen-centered phenoxy and semiquinone radicals.