A Methodology Towards Mechanical Properties Optimization of Three-Component Polymers by the Gradual Variation of Feed Composition in Semi-Continuous Emulsion-Free Radical Polymerization.

In this work, a new methodology for the synthesis of three-component polymers (TCPs) was developed using a seeded, semi-continuous free-radical emulsion polymerization towards the optimization of the moduli-ultimate deformation performance and energy dissipation capacity for a styrene (S), n-butyl acrylate (BA), and 4-vinylbenzyl chloride (VBC) system. The three components were sequentially fed in pairs, varying feed composition along the conversion using S as the common monomer. To prepare a reference material, an industrial method was utilized with those monomers, using an equivalent global composition in a two-stage batch process (TS).

Giving a Second Opportunity to Tire Waste: An Alternative Path for the Development of Sustainable Self-Healing Styrene-Butadiene Rubber Compounds Overcoming the Magic Triangle of Tires.

Current regulations demand tires with long lifetime and reduced fuel consumption without sacrificing car safety. However, tire technology still needs to reach a suitable balance between these three indicators. Here, we address them by developing a self-healing tire compound using styrene-butadiene rubber (SBR) as the matrix and reclaimed tire waste as the sustainable filler.

Glycerylphytate as an ionic crosslinker for 3D printing of multi-layered scaffolds with improved shape fidelity and biological features.

The fabrication of intricate and long-term stable 3D polymeric scaffolds by a 3D printing technique is still a challenge. In the biomedical field, hydrogel materials are very frequently used because of their excellent biocompatibility and biodegradability, however the improvement of their processability and mechanical properties is still required. This paper reports the fabrication of dual crosslinked 3D scaffolds using a low concentrated (<10 wt%) ink of gelatin methacryloyl (GelMA)/chitosan and a novel crosslinking agent, glycerylphytate (G1Phy) to overcome the current limitations in the 3D printing field using hydrogels.

Biocompatible Polymer Materials with Antimicrobial Properties for Preparation of Stents.

Biodegradable polymers are promising materials for use in medical applications such as stents. Their properties are comparable to commercially available resistant metal and polymeric stents, which have several major problems, such as stent migration and stent clogging due to microbial biofilm. Consequently, conventional stents have to be removed operatively from the patient's body, which presents a number of complications and can also endanger the patient's life.

A Way to Predict Gold Nanoparticles/Polymer Hybrid Microgel Agglomeration Based on Rheological Studies.

In this work, a detailed rheological study of hybrid poly(acrylamide--acrylic acid) P(AAmAAc) aqueous microgel dispersions is performed. Our intention is to understand how the presence of gold nanoparticles, AuNP, embedded within the microgel matrix, affects the viscoelastic properties, the colloidal gel structure formation, and the structure recovery after cessation of the deformation of the aqueous microgel dispersions. Frequency sweep experiments confirmed that hybrid microgel dispersions present a gel-like behavior and that the presence of AuNP content within microgel matrix contributes to the elasticity of the microgel dispersions.

HDPE/Chitosan Composites Modified with PE-g-MA. Thermal, Morphological and Antibacterial Analysis.

In this work, composites of high density polyethylene (HDPE) with chitosan were prepared by melt compounding in a laboratory internal mixer. Maleic anhydride grafted HDPE (PE-g-MA) in a concentration up to 25 phr was used as a compatibilizer to enhance the dispersing effect of chitosan in the HDPE matrix. The degree of crystallinity was investigated by X-ray diffraction (XRD) and the thermal properties were analyzed by differential scanning calorimetry (DSC) and thermogravimetry (TG).

PEO coatings design for Mg-Ca alloy for cardiovascular stent and bone regeneration applications.

Four bioactive PEO (plasma electrolytic oxidation) coatings were generated on Mg0.8Ca alloy using a Ca/P-based electrolyte and adding Si or Fas necessary. Surface characteristics, chemical composition and ion liberation of the coatings were characterized using SEM/EDS (Scanning Electron Microscopy/Energy Dispersive X-ray spectroscopy), X-ray diffraction, optical profilometry and ICP-OES (inductively coupled plasma optical emission spectrometry).

Bioadhesive functional hydrogels: Controlled release of catechol species with antioxidant and antiinflammatory behavior.

Chronic wounds are particularly difficult to heal and constitute an important global health care problem. Some key factors that make chronic wounds challenging to heal are attributed to the incessant release of free radicals, which activate the inflammatory system and impair the repair of the wound. Intrinsic characteristics of hydrogels are beneficial for wound healing, but the effective control of free radical levels in the wound and subsequent inflammation is still a challenge.

Anti-inflammatory Surface Coatings Based on Polyelectrolyte Multilayers of Heparin and Polycationic Nanoparticles of Naproxen-Bearing Polymeric Drugs.

Immune response to biomaterials can produce chronic inflammation and fibrosis leading to implant failure, which is related to the surface properties of the biomaterials. This work describes the preparation and characterization of polyelectrolyte multilayer (PEM) coatings that combine the anti-inflammatory activity of heparin as polyanion with the potential release of Naproxen, a nonsteroidal anti-inflammatory drug from polymeric nanoparticles (NP) with cationic surface charge. The polyelectrolyte multilayers were characterized by physical methods to estimate multilayer growth, thickness, zeta potential, and topography.

Glycerylphytate compounds with tunable ion affinity and osteogenic properties.

Phytic acid (PA) is a natural-occurring antioxidant, which plays an important role in many biological processes. PA is recognized as a potent inhibitor of lipid peroxidation because of its high affinity to multivalent cations, and it can play a role in osteogenic processes. However, its powerful chelating capacity is controversial because it can lead to a severe reduction of mineral availability in the organism.

Amphiphilic Acrylic Nanoparticles Containing the Poloxamer Star Bayfit® 10WF15 as Ophthalmic Drug Carriers.

Topical application of drops containing ocular drugs is the preferred non-invasive route to treat diseases that affect the anterior segment of the eye. However, the formulation of eye drops is a major challenge for pharmacists since the access of drugs to ocular tissues is restricted by several barriers. Acetazolamide (ACZ) is a carbonic anhydrase inhibitor used orally for the treatment of ocular hypertension in glaucoma.

Organometallic-Derived Carbon (ODC)-Metal Nano-Oxide Composites as Improved Electrode Materials for Supercapacitors.

In the search for the new generation of electrochemical energy storage materials, a novel and straightforward synthetic route for porous carbons and metal oxide nanoparticle composites based on the chlorination of the organometallic compounds Ni(CH) and Mn(CHO) at moderate temperatures, followed by hydrothermal treatment, has been developed. Electrochemical measurements in a three-electrode configuration show that, in both composites NiO@ODC and MnO@ODC, a synergistic effect between the capacitive and pseudocapacitive energy storage mechanisms is observed, thereby improving their electrochemical performance vs pure carbon materials. Electrochemical evaluation of symmetric cells gave gravimetric capacitances of 124 and 130 F g for NiO@ODC and MnO@ODC, respectively.

Versatile Graphene-Based Platform for Robust Nanobiohybrid Interfaces.

Technologically useful and robust graphene-based interfaces for devices require the introduction of highly selective, stable, and covalently bonded functionalities on the graphene surface, whilst essentially retaining the electronic properties of the pristine layer. This work demonstrates that highly controlled, ultrahigh vacuum covalent chemical functionalization of graphene sheets with a thiol-terminated molecule provides a robust and tunable platform for the development of hybrid nanostructures in different environments. We employ this facile strategy to covalently couple two representative systems of broad interest: metal nanoparticles, via S-metal bonds, and thiol-modified DNA aptamers, via disulfide bridges.

Bioactive Sr(II)/Chitosan/Poly(ε-caprolactone) Scaffolds for Craniofacial Tissue Regeneration. In Vitro and In Vivo Behavior.

In craniofacial tissue regeneration, the current gold standard treatment is autologous bone grafting, however, it presents some disadvantages. Although new alternatives have emerged there is still an urgent demand of biodegradable scaffolds to act as extracellular matrix in the regeneration process. A potentially useful element in bone regeneration is strontium.

Bioactive and Bioadhesive Catechol Conjugated Polymers for Tissue Regeneration.

The effective treatment of chronic wounds constitutes one of the most common worldwide healthcare problem due to the presence of high levels of proteases, free radicals and exudates in the wound, which constantly activate the inflammatory system, avoiding tissue regeneration. In this study, we describe a multifunctional bioactive and resorbable membrane with in-built antioxidant agent catechol for the continuous quenching of free radicals as well as to control inflammatory response, helping to promote the wound-healing process. This natural polyphenol (catechol) is the key molecule responsible for the mechanism of adhesion of mussels providing also the functionalized polymer with bioadhesion in the moist environment of the human body.

Adamantane-Based Micro- and Ultra-Microporous Frameworks for Efficient Small Gas and Toxic Organic Vapor Adsorption.

Microporous organic polymers and related porous materials have been applied in a wide range of practical applications such as adsorption, catalysis, adsorption, and sensing fields. However, some limitations, like wide pore size distribution, may limit their further applications, especially for adsorption. Here, micro- and ultra-microporous frameworks (HBPBA-D and TBBPA-D) were designed and synthesized via Sonogashira⁻Hagihara coupling of six/eight-arm bromophenyl adamantane-based "knots" and alkynes-type "rod" monomers.

Active viscosupplements for osteoarthritis treatment.

Objective: Osteoarthritis is a chronic, painful and disabling disease which prevalence is increasing in developing countries. Patients with osteoarthritis present a reduced synovial fluid viscoelasticity due to a reduction in concentration and molecular weight of hyaluronic acid. Currently, the main treatment used to restore the compromised rheological properties of synovial fluid is the viscosupplementation by hyaluronic acid injections that can be combined with oral anti-inflammatory drugs for pain relief.

Antioxidant Bilayers Based on PHBV and Plasticized Electrospun PLA-PHB Fibers Encapsulating Catechin.

The main objective of this work was to develop bio-based and biodegradable bilayer systems with antioxidant properties. The outer layer was based on a compression-molded poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)-based material while antioxidant electrospun fibers based on poly(lactic acid) (PLA) and poly(3-hydroxybutyrate) (PHB) blends formed the inner active layer. In particular, PLA was blended with 25 wt% of PHB to increase the crystallinity of the fibers and reduce the fiber defects.

Polylactic-co-glycolic acid microspheres added to fixative cements and its role on bone infected architecture.

Joint prostheses are an essential element to improve quality of life. However, prostheses may fail due to several factors, including the most frequent cause, Staphylococcus aureus infection. The identification of new fixing bone cements with less reactivity on bone tissue and an adequate response to infection remains a primary challenge.

Bioactive multi-elemental PEO-coatings on titanium for dental implant applications.

Bioactive PEO (Plasma Electrolytic Oxidation) coatings were generated on Grade I commercially pure titanium for dentistry applications using a Ca/P-based electrolyte with added Si, Mg, Zn or F species. Surface characteristics, chemical composition and ion liberation of the coatings were characterized using SEM/EDS, X-ray diffraction, optical profilometry, contact angle and ICP-OES. Corrosion resistance (OCP and DC polarization) was evaluated in SBF.

Multicolor Mechanochromism of a Polymer/Silica Composite with Dual Distinct Mechanophores.

The development of a multicolor mechanochromic polymer/silica composite is achieved by using two distinct types of mechanochromophores. The multicolor mechanochromism of the composite containing diarylbibenzofuranone in silica-rich domains and naphthopyran in the polymer-rich domain is observed. The obtained composite shows blue, green, and orange colors according to the intensity of applied mechanical stimuli, solvent addition, and lapse of time.

Enzymatically Cross-Linked Silk Fibroin-Based Hierarchical Scaffolds for Osteochondral Regeneration.

Osteochondral (OC) regeneration faces several limitations in orthopedic surgery, owing to the complexity of the OC tissue that simultaneously entails the restoration of articular cartilage and subchondral bone diseases. In this study, novel biofunctional hierarchical scaffolds composed of a horseradish peroxidase (HRP)-cross-linked silk fibroin (SF) cartilage-like layer (HRP-SF layer) fully integrated into a HRP-SF/ZnSr-doped β-tricalcium phosphate (β-TCP) subchondral bone-like layer (HRP-SF/dTCP layer) were proposed as a promising strategy for OC tissue regeneration. For comparative purposes, a similar bilayered structure produced with no ion incorporation (HRP-SF/TCP layer) was used.

Combining Breath Figures and Supercritical Fluids To Obtain Porous Polymer Scaffolds.

Supercritical fluids technology is a clean methodology to foam polymeric materials. However, this technique provides only the formation of inner porosity, whereas the so-called skin layer is commonly observed at the polymer surface. This article describes a new method for the preparation of outer and inner porous poly(ε-caprolactone) (PCL) scaffolds by combination of supercritical CO (SCCO) foaming and the breath figures technique.