98%
921
2 minutes
20
The eco-friendly recovery of strategic metals from spent lithium-ion batteries is pivotal for realizing circular economy goals. This study introduces a low-viscosity hydrated deep eutectic solvent (DES) composed of citric acid (CA) and choline chloride (ChCl) for the efficient extraction of crucial metals from spent LiNiCoMnO (NCM) cathodes. The leaching parameters were optimized within response surface methodology (RSM), and maximum extraction efficiencies of 97.75 % Li, 99.57 % Co, 99.91 % Ni, and 99.56 % Mn were achieved under the optimal conditions. Kinetic analysis revealed extraction mechanisms controlled by surface reactions. The DES maintained high leaching efficiency over multiple recycling cycles, confirming its excellent reusability. A sequential separation strategy was developed to integrate the co-precipitation of Ni-Co-Mn oxalates followed by selective Li oxalate recovery, enabling the regeneration of high-purity ternary cathode precursors via oxalate-mediated crystallization. Density functional theory (DFT) calculations provided atomic-scale insights into the coordination interactions between the multivalent metal ions and DES functional groups. This process significantly reduces hazardous chemical consumption while maintaining cost-effectiveness throughout the recovery workflow. These findings validate the potential of this DES system for scalable, sustainable industrial applications in critical metal recycling from spent LIB cathodes.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.jhazmat.2025.139224 | DOI Listing |
Environ Res
September 2025
Materials Science, Engineering, and Commercialization (MSEC) Program, Texas State University, San Marcos, TX-78666, USA; Department of Engineering Technology, Texas State University, San Marcos, TX-78666, USA.
Fly ash (FA) landfills are overflowing with materials, and unexplored waste streams like waste spent garnet (WSG) and waste foundry sand (WFS) are often dumped in onsite storage spaces, limiting land availability for future use and exacerbating environmental concerns related to waste disposal. Therefore, this research proposes recycling FA to produce reclaimed FA (RFA) as a binder, replacing 40-60% of ground granulated blast furnace slag (GGBFS) and 30-50% of river sand (RS) with WSG and WFS to produce geopolymers. The performance of geopolymers was assessed under different curing regimes, including ambient-temperature curing (ATC), ambient-temperature water curing (AWC), high-temperature curing (HTC), and high-temperature water curing (HWC).
View Article and Find Full Text PDFBioresour Technol
September 2025
Department of Earth Resources and Environmental Engineering, Hanyang University, Seoul 04763, Republic of Korea. Electronic address:
The rapid increase of electronic waste, particularly battery waste, presents significant environmental challenges such as pollutant emissions and resource depletion, emphasizing the need for effective valorization and reuse strategies. This study introduces a novel approach for repurposing end-of-life lithium iron phosphate (LFP) batteries as catalysts in the pyrolysis of walnut shells (WS). Characterization analyses revealed that LFP provides both Lewis and Brønsted acid sites, which alter the thermal decomposition pathway of WS.
View Article and Find Full Text PDFJ Environ Radioact
September 2025
Key Laboratory of Solid Waste Treatment and Resource Recycle (SWUST), Ministry of Education, Southwest University of Science and Technology, 59 Qinglong Road, Mianyang, 621010, China. Electronic address:
The discharge of nuclear wastewater into the sea may pose a significant environmental and health risk due to radionuclides such as Cs and Sr. Consequently, the efficient removal of these nuclides has emerged as a focal point in the field of radioactive wastewater treatment. Traditional restoration methods, which rely on physical and chemical interventions as well as bioremediation, are economically burdensome and unsuitable for large-scale restoration efforts.
View Article and Find Full Text PDFLangmuir
September 2025
School of Materials Science and Engineering, Changchun University of Science and Technology, Changchun, Jilin 130022, P.R. China.
Amidst global sustainability imperatives, this study pioneers a solid-state regeneration strategy that transforms spent LiCoO (LCO) cathodes into high-performance materials via amorphous lithium iron phosphate glass (LFPg)-driven structural reconfiguration. Unlike conventional recycling that decomposes cathodes, our approach leverages LFPg's defect-rich framework, high ionic conductivity, and dynamic interfacial activity to directly reconstruct degraded LCO crystals. The LFPg acts as a multifunctional repair agent: creating Li diffusion channels through disorder engineering, eliminating oxygen vacancies via atomic oxygen transfer, scavenging impurities (e.
View Article and Find Full Text PDFAngew Chem Int Ed Engl
August 2025
Key Laboratory for Colloid and Interface Chemistry (Ministry of Education), School of Chemistry and Chemical Engineering, Shandong University, Jinan, Shandong, 250100, China.
The large-scale retirement of LiFePO (LFP) batteries demands sustainable strategies for material recovery and functional repurposing. However, the inert micrometer-scale morphology and electronically stable lattice of spent LFP hinder its direct catalytic reuse. Herein, we present a structure-guided strategy that upcycles spent LFP into a high-performance oxygen evolution reaction (OER) electrocatalyst.
View Article and Find Full Text PDF