Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Silicon monoxide (SiO) has garnered significant attention as a promising anode material for high-energy-density lithium-ion batteries due to its lower volume expansion relative to pure silicon (Si) and its higher capacity compared to graphite. Nevertheless, the poor intrinsic electronic/ionic conductivity and the low initial Coulombic efficiency (ICE) of SiO result in inferior rate capability and inadequate practical energy density, hindering its commercial viability. Here, a simultaneous prelithiation and in situ nitrogen (N) doping approach for SiO utilizing lithium nitride (LiN), which significantly enhances both the ICE and lithium-ion (Li) diffusion kinetics, is proposed. N atoms are not only incorporated into the carbon layer on the surface of SiO but also form a uniformly distributed amorphous LiSiN phase within the SiO, facilitating Li transport. Molecular dynamics simulations demonstrate that the Li diffusion coefficient of amorphous LiSiN is significantly higher than that of other crystalline phases present in the prelithiated SiO matrix. The 1.5 Ah pouch cells further validate that the SiON-0.175/graphite||NCM811 exhibits a high ICE of 88.06%, and it retains 51.5% of its capacity even under 4C fast charging conditions. This study offers new insights into the development of next-generation SiO anode materials with high ICE and high-rate performance.

Download full-text PDF

Source
http://dx.doi.org/10.1002/smll.202501524DOI Listing

Publication Analysis

Top Keywords

prelithiation situ
8
situ nitrogen
8
nitrogen doping
8
sio
8
initial coulombic
8
coulombic efficiency
8
amorphous lisin
8
high ice
8
synergistic prelithiation
4
doping lin
4

Similar Publications

Enabling high-energy-density and long-life lithium-ion batteries through bifunctional cathode prelithiation.

J Colloid Interface Sci

August 2025

State Key Laboratory of Advanced Fiber Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China. Electronic address:

Lithium-ion batteries incorporating Si-based anodes and nickel-rich LiNiCoMnO (NCM) cathodes offer exceptional energy density compared to conventional systems. However, they still suffer from two critical challenges: irreversible lithium loss at the anode and interfacial degradation at the cathode. To simultaneously resolve both issues, we propose a bifunctional prelithiation strategy using a novel LiAlO (LAO) material, which has remained unexplored due to sluggish delithiation kinetics and poorly understood lithium extraction mechanisms.

View Article and Find Full Text PDF

Highly Stable and Multifunctional ZnNi Alloy Nanoarrays for Long-Life Anode-free Lithium Metal Batteries.

ACS Nano

August 2025

Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Department of Chemistry, College of Smart Materials and Future Energy, Fudan University, Shanghai 200433, China.

Nickel (Ni) foil current collectors exhibit high stability, making them promising candidate materials for next-generation high-performance anode-free lithium metal batteries (AFLMBs). However, the inherent lithiophobicity of Ni foil results in compromised reversibility of lithium deposition and stripping on its surface, significantly limiting its practical application. Herein, a ZnNi alloy layer (ZnNi@Ni) is fabricated on Ni foil via thermal evaporation and an alloying method.

View Article and Find Full Text PDF

Multiscale interfacial stabilization via prelithiation separator engineering for Ah-level anode-free lithium batteries.

Nat Commun

May 2025

State Key Laboratory of Solidification Processing, Center for Nano Energy Materials, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi'an, PR China.

Anode-free lithium batteries represent a promising avenue for high-energy-density storage, yet their practical application is hindered by lithium inventory loss from parasitic interfacial reactions, cathode degradation, and limited Li reversibility. Herein, we propose a polyolefin separator integrated with a LiS@C sacrificial layer, achieving multiscale interfacial stabilization in Ah-class anode-free pouch cells. This approach simultaneously replenishes the customized Li inventory during the formation cycle and establishes the lithium polysulfide-containing cathode interface with high-voltage tolerance (till 4.

View Article and Find Full Text PDF

Synergistic Prelithiation and In Situ Nitrogen Doping via LiN in SiO Anodes: A Dual-Benefit Pathway to Achieving Enhanced Li Kinetics and High Initial Coulombic Efficiency.

Small

May 2025

State Key Laboratory of Silicon and Advanced Semiconductor Materials, and School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027, China.

Silicon monoxide (SiO) has garnered significant attention as a promising anode material for high-energy-density lithium-ion batteries due to its lower volume expansion relative to pure silicon (Si) and its higher capacity compared to graphite. Nevertheless, the poor intrinsic electronic/ionic conductivity and the low initial Coulombic efficiency (ICE) of SiO result in inferior rate capability and inadequate practical energy density, hindering its commercial viability. Here, a simultaneous prelithiation and in situ nitrogen (N) doping approach for SiO utilizing lithium nitride (LiN), which significantly enhances both the ICE and lithium-ion (Li) diffusion kinetics, is proposed.

View Article and Find Full Text PDF

Turning Residual Lithium Compounds into a Fluorinated Interface for a Water-Stable, Industrializable Prelithiated Micron-SiO Anode.

ACS Appl Mater Interfaces

March 2025

CAS Key Laboratory of Molecular Nanostructure and Nanotechnology, CAS Research/Education Center for Excellence in Molecular Sciences, Beijing National Laboratory for Molecular Sciences (BNLMS), Institute of Chemistry, Chinese Academy of Sciences (CAS), Beijing 100190, P. R. China.

The implementation of carbon-coated microsized SiO (MSiO@C) materials in high energy density lithium-ion batteries (LIBs) is challenged by their low initial Coulombic efficiency (ICE), large volume expansion, and limited cycle life. Even though prelithiation is an effective strategy to enhance ICE, it will make the prelithiated MSiO@C (Li-MSiO@C) extremely sensitive to moisture. For industrial applications, it is important to develop chemically and electrochemically stable Li-MSiO@C with high ICE and good cycling performance.

View Article and Find Full Text PDF