98%
921
2 minutes
20
Although nonflammable electrolytes are beneficial for battery safety, they often adversely affect the electrochemical performance of lithium-ion batteries due to their poor compatibility with electrodes. Herein, we design a nonflammable electrolyte consisting of cyclic carbonate and 2,2-difluoroethyl acetate (DFEA) solvents paired with several surface-film-forming additives, significantly improving the safety and cycling performance of NMC811||SiO/graphite pouch cells. The DFEA solvent exhibits not only good flame retardancy but also lower lowest unoccupied molecular orbital (LUMO) energy, promoting the formation of a robust inorganic-rich and gradient-architecture hybrid interface between the SiO/graphite anode and electrolyte. The double insurance of good flame retardancy of the DFEA solvent and decreased exothermic effects of both bulk electrolyte and DFEA-derived solid electrolyte interphase (SEI) can ensure the high safety of the pouch cell. Moreover, the highly robust SEI can prevent the excessive reduction decomposition of the electrolyte and alleviate the structural decay of the anode, which can restrain the formation of lithium deposition on the anode surface and further suppress the structural decay of NMC materials. This contributes to the unprecedented cycling performance of the NMC811||SiO/graphite pouch cells with a capacity retention of 80% after 1000 cycles at a 0.33C rate.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acsami.4c02237 | DOI Listing |
ACS Appl Mater Interfaces
September 2025
School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China.
The development of anode materials for lithium-ion batteries must meet the demands for high safety, high energy density, and fast-charging performance. TiNbO is notable for its high theoretical specific capacity, low structural strain, and exceptional fast-charging capability, attributed to its Wadsley-Roth crystal structure. However, its inherently poor conductivity has hindered its practical application.
View Article and Find Full Text PDFJ Phys Chem Lett
September 2025
Institute of multidisciplinary research for advanced materials, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai, Miyagi 980-8577, Japan.
High-entropy oxides (HEOs) are attracting significant attention owing to their compositional tunability and structural robustness. However, the identification of specific compositional combinations that yield a single-phase structure in HEOs remains unclear owing to the immense combinatorial complexity inherent in multielement systems. This study adopts a materials informatics approach that integrates experimental synthesis data with machine learning to identify key compositional factors enabling single-phase HEO formation via solid-state synthesis.
View Article and Find Full Text PDFSmall
September 2025
Key Laboratory of Electrochemical Power Sources of Hubei Province, College of Chemistry and Molecular Sciences, Wuhan University, Wuhan, 430072, China.
Hybrid artificial layer based on inorganic/polymer composite endows superior toughness and mechanical strength, which can achieve high stability of lithium metal anode. However, the large particle size and uneven distribution of inorganic fillers hinder the uniform flow of lithium ions across the membrane, making it difficult to achieve smooth lithium metal deposition/stripping. In this work, a chemical lithiation-induced defluorination strategy is proposed to engineer poly(vinylidene difluoride) (PVDF)-based artificial layers, enabling in situ incorporation of highly dispersed LiF nanofiller within the polymer matrix and precise control over the LiF content.
View Article and Find Full Text PDFRSC Adv
September 2025
Laboratory of Spectroscopic Characterization and Optical Materials, Faculty of Sciences, University of Sfax B.P. 1171 3000 Sfax Tunisia
Lithium metavanadate (LiVO) is a material of growing interest due to its monoclinic 2/ structure, which supports efficient lithium-ion diffusion through one-dimensional channels. This study presents a detailed structural, electrical, and dielectric characterization of LiVO synthesized a solid-state reaction, employing X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), and impedance/dielectric spectroscopy across a temperature range of 473-673 K and frequency range of 10 Hz to 1 MHz. XRD and Rietveld refinement confirmed high crystallinity and single-phase purity with lattice parameters = 10.
View Article and Find Full Text PDFChem Sci
September 2025
College of Chemistry and Materials Engineering, Wenzhou University Wenzhou Zhejiang 325035 P. R. China
Sodium-ion batteries (SIBs) are promising alternatives to lithium-ion batteries (LIBs) owing to abundant resources and cost-effectiveness. However, cathode materials face persistent challenges in structural stability, ion kinetics, and cycle life. This review highlights the transformative potential of high-entropy (HE) strategies that leveraging multi-principal element synergies to address these limitations entropy-driven mechanisms.
View Article and Find Full Text PDF