Combined effect of ultrasound and vacuum impregnation for the modification of apple tissue enriched with aloe vera juice.

Ultrason Sonochem

Department of Food Engineering and Process Management, Institute of Food Sciences, Warsaw University of Life Sciences- SGGW, Nowoursynowska 159c, Warsaw 02-776, Poland. Electronic address:

Published: March 2024


Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

The aim of the work was to investigate how ultrasonic (US) treatment impacts on the physical and chemical properties of vacuum-impregnated apples. Apple slices were subjected to vacuum impregnation (VI) in an Aloe vera juice solution without additional treatments, serving as the reference material. Alternatively, ultrasound (US) treatments, at frequencies of 25 or 45 kHz, and durations of 10, 20, or 30 min, were employed as a pre-treatments before the VI process. The use of US processing enabled a significant increase in the efficiency of VI, without influencing in a significant way the color of the VI samples. The VI process led to a reduction in the content of bioactive compounds, in particular vitamin C and TPC decreased by 34 and 32 %, respectively. The use of US as a pre-treatment, in particular at 45 kHz for 20 or 30 min, led to a better preservation of these compounds (unchanged values for vitamin C and decrease by 23-26 % for TPC in comparison to the fresh samples). Through cluster analysis encompassing all assessed properties, it was evident that US treatment was beneficial for the processing, however the application of appropriate parameters of US treatment (frequency and time) had an impact on achieving similar quality to VI samples. The ultrasound treatment before vacuum impregnation may be suitable, however, the specific processing parameters should be defined for the obtained high quality of the final product.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10906508PMC
http://dx.doi.org/10.1016/j.ultsonch.2024.106812DOI Listing

Publication Analysis

Top Keywords

vacuum impregnation
12
aloe vera
8
vera juice
8
combined ultrasound
4
ultrasound vacuum
4
impregnation modification
4
modification apple
4
apple tissue
4
tissue enriched
4
enriched aloe
4

Similar Publications

Discarded sericultural mulberry branch based triple layer composite phase change material with lignin enhanced thermal management capability.

Int J Biol Macromol

September 2025

Key Laboratory of Bio-Based Material Science and Technology of Ministry of Education, Northeast Forestry University, Harbin, 150040, China. Electronic address:

With the exhaustion of fossil fuels, prior phase change materials are characterized by such drawbacks as poor thermal conductivity, weak shape stability, and high costs. Therefore, the preparation of phase change materials with brilliant thermal-insulating properties, high thermal conductivity, and leakage-free properties has emerged as a crucial research focus. Herein, a sericultural mulberry branch-derived (SMB) composite phase change material was prepared by deep eutectic solvent pretreated SMB and vacuum-assisted impregnated paraffin wax with cupric oxide (CuO).

View Article and Find Full Text PDF

Diagnosis and Surgical Treatment of Hydatidiform Mole.

Diagnostics (Basel)

August 2025

New England Trophoblastic Disease Center, Division of Gynecologic Oncology, Department of Obstetrics, Gynecology and Reproductive Biology, Brigham and Women's Hospital, Harvard Medical School, Boston, MA 02115, USA.

Hydatidiform mole is a trophoblastic disorder resulting from abnormal fertilization. Diagnosis is established through a combination of clinical findings, elevated serum human chorionic gonadotropin (hCG) levels, and characteristic features on transvaginal ultrasound. Timely and accurate diagnosis is essential for initiating prompt treatment and preventing medical complications.

View Article and Find Full Text PDF

Thermal impregnation (TI) is a traditional method of sugar infusion, but it has disadvantages such as long processing time and uneven sugar distribution. Therefore, developing sugar impregnation methods to enhance product flavor, nutritional value, and processing efficiency is critical for addressing potential quality loss and efficiency bottlenecks in traditional preserve processing technologies. This study took the TI process widely adopted in Xinjiang over the long term as a reference and systematically compared the effects of vacuum impregnation (VI) and ultrasonic-assisted impregnation (UI) on the flavor characteristics and physicochemical properties of plum preserves.

View Article and Find Full Text PDF

Structural and Magnetic Properties of Carbon-Based Nanocomposites Containing Iron Oxides: Effect of Thermal Treatment Atmosphere.

Nanomaterials (Basel)

August 2025

Departamento de Química, Facultad de Ciencias Naturales y Exactas, Universidad del Valle, Cali AA 25360, Colombia.

Carbon-based nanocomposites coated with iron oxides were synthesized using a wet impregnation method with thermally annealed coal and an iron nitrate precursor. The influence of the thermal treatment atmosphere (air, vacuum, or nitrogen) on the morphology, structure, and magnetic properties of the nanocomposites was examined by X-ray diffraction, Raman spectroscopy, and transmission electron microscopy. It was found that the vacuum thermal treatment produced carbon-based nanocomposite containing iron oxide with the highest crystallinity, according to XRD analysis, while also inducing the greatest degree of structural defects in the carbon matrix, as evidenced by Raman analysis.

View Article and Find Full Text PDF

The reconstruction of critical-sized bone defects remains a significant clinical challenge. Natural polymers used for bone defects exhibit excellent biocompatibility and degradability; however, their inadequate mechanical properties, absence of biomimetic topological structures, and limited osteogenic potential hinder their suitability for clinical applications. In this study, we developed an all-natural wood hydrogel by integrating natural lignocellulosic nanofibers into chitosan hydrogels through delignification and vacuum impregnation.

View Article and Find Full Text PDF