Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Trace copper ion (Cu(II)) in water and wastewater can trigger peroxymonosulfate (PMS) activation to oxidize organic compounds, but it only works under alkaline conditions. In this work, we found that the presence of chloride could significantly accelerate the oxidation of Acid Orange 7 (AO7) by the Cu(II)/PMS process at a wide pH range (4.0-9.0). The observed pseudo-first-order rate constant k for AO7 oxidation was linearly correlated with the increased Cl concentration (0-300 mM). An increase in mineralization rate was observed in the presence of Cl, while the overall mineralization was quite low. Decomposition of PMS facilitated when Cl concentration or pH value increased. Based on the scavenger experiments and electron paramagnetic resonance (EPR) measurement, the mechanism of Cu(II)-catalyzed PMS oxidation process in the presence of Cl was proposed as both the radical and non-radical pathway, and O was the reactive oxygen species in the Cu(II)/PMS system. Finally, a possible degradation pathway of AO7 was elucidated. The feasibility of in situ utilizing high salinity and trace cupric species to accelerate the degradation of organic pollutants by the Cu(II)/PMS process in water and wastewater was demonstrated. However, the identification of undesired chlorinated by-products reminds us of cautiousness in assessing the application of Cu(II)/PMS system under chloride-rich environment. The findings of this work provide a simple and efficient approach to apply PMS in the remediation of refractory organic contaminants in the presence of trace cupric species under a high salinity environment with a wide range of pH.

Download full-text PDF

Source
http://dx.doi.org/10.1007/s11356-021-14262-1DOI Listing

Publication Analysis

Top Keywords

cuii/pms system
12
radical non-radical
8
acid orange
8
water wastewater
8
cuii/pms process
8
wide range
8
high salinity
8
trace cupric
8
cupric species
8
cuii/pms
5

Similar Publications

Impact of metal ions on PMS/Cl disinfection efficacy: Enhancing or impeding microbial inactivation?

Sci Total Environ

November 2024

Shaanxi Key Laboratory of Environmental Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China; Shaanxi Provincial Field Scientific Observation and Research Station of Water Quality in Qinling Mountains, Xi'an University of Architecture and Technology, Xi'an 710055, China;

Peroxymonosulfate (PMS) is an eco-friendly disinfectant gaining attention. This study examined the influence of metal ions (Co(II), Cu(II), Fe(II)) on PMS disinfection with chloride ions (Cl) against waterborne microorganisms, encompassing both bacteria and fungal spores. The findings elucidated that metal ions augment the inactivation of bacteria in the PMS/Cl system while concurrently impeding the inactivation of fungal spores.

View Article and Find Full Text PDF

Dissolved copper and iron ions are regarded as friendly and economic catalysts for peroxymonosulfate (PMS) activation, however, neither Cu(II) nor Fe(III) shows efficient catalytic performance because of the slow rates of Cu(II)/Cu(I) and Fe(III)/Fe(II) cycles. Innovatively, we observed a significant enhancement on the degradation of organic contaminants when Cu(II) and Fe(III) were coupled to activate PMS in borate (BA) buffer. The degradation efficiency of Rhodamine B (RhB, 20 µmol/L) reached up to 96.

View Article and Find Full Text PDF

Ultra-efficient peroxymonosulfate utilization and trichloroethylene degradation in heterogeneous catalytic system guided by sheet-like CuMnO nanoparticles: The role of Cu(III)-O species and free radicals.

J Environ Manage

August 2024

State Environmental Protection Key Laboratory of Environmental Risk Assessment and Control on Chemical Process, School of Resource and Environmental Engineering, East China University of Science and Technology, Shanghai, 200237, China; Institute of Applied Ecology, Chinese Academy of Sciences, Sheny

Synthesizing cubic spinel CuMnO with nanosheet structure (SCMO) aimed to construct a "non-radical-mediated radical-oxidative reaction", for increasing PMS utilization efficiency, and solving the defects of SO and •OH through indirect PMS activation by electron transfer process. Compared with box-like CuMnO (11.1%, 0.

View Article and Find Full Text PDF

Mechanisms of iopamidol transformation catalyzed by a copper corrosion product (c-CuO) during peroxymonosulfate disinfection.

J Hazard Mater

January 2024

State Key Laboratory of Environmental Aquatic Chemistry, Research Center for Eco, Environmental Sciences, University of Chinese Academy of Sciences, Chinese Academy of Sciences, 18 Shuang-qing Road, Beijing 100085, China.

Peroxymonosulfate (PMS) is an alternative disinfectant for drinking water. This study aimed to investigate the transformation of iopamidol (IPM) catalyzed by a main copper corrosion product (c-CuO) with PMS as a disinfectant. The observed pseudo-first-order constant (k) for the IPM degradation in the c-CuO/PMS system (0.

View Article and Find Full Text PDF
Article Synopsis
  • The study investigates how temperature affects the performance of divalent copper (Cu(II)) in a peroxymonosulfate (PMS) system for removing the antibiotic sulfamethoxazole (SMX).
  • Results indicate that increasing temperature from 30 °C to 60 °C only slightly improves SMX removal efficiency, with the best outcomes at neutral or basic pH levels and optimal PMS concentration at 2.4 mM.
  • The research identifies singlet oxygen as the main active species at lower temperatures, while sulfate radicals become more effective at higher temperatures, with trivalent copper (Cu(III)) also playing a significant role in SMX degradation.
View Article and Find Full Text PDF