Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
All-inorganic metal halide perovskites have attracted great interest in recent years due to their good device performance with higher thermal stability than that of their organic-inorganic perovskite counterparts. However, the all-inorganic perovskite polycrystalline films prepared by the conventional spin-coating method possess many pinholes, nonuniform surface with many small crystals, and irregular agglomerates, limiting their device performance. Herein, we introduced a monolayer nano-polystyrene (PS) sphere confined growth method for obtaining CsPbBr3 nanonet films (NFs) with ordered nanostructures grown in the preferred (110) orientation, which is beneficial for the charge carrier transport and the light-harvesting efficiency. The (110) peak intensity of CsPbBr3 NFs increased with the increase of the diameter of the monolayer sphere, while the (001) peak intensity was suppressed greatly, indicating the more preferred (110) oriented growth. The PDs based on (110)-orientation-preferred CsPbBr3 NFs prepared by using 850 nm PS spheres showed the best performance. The best performing device displayed the biggest linear dynamic range of up to 120 dB. In addition, a responsivity of 2.84 A W-1 and a detectivity of 5.47 × 1012 Jones were also achieved.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1039/c9nr03213d | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Photothermophoretic Splitting of Gold Nanoparticles for Plasmonic Nanopores and Nanonets Sensing.
J Phys Chem Lett
June 2024
Key Laboratory of Artificial Micro/Nano Structure of Ministry of Education, School of Physics and Technology, Wuhan University, Wuhan 430072, China.
Optical processing of single plasmonic nanoparticles reinvents the way of high-density information storage, high-performance sensing, and high-definition displays. However, such laser-fabricated nanoplasmonics with well-defined hot spots remain elusive due to the diffraction limit of light. Here we show Au nanoparticle (NP) decorated nanopores can be facilely generated with photothermal splitting of single Au NPs embedded in a silica matrix.
View Article and Find Full Text PDFIonic liquid enables high-performance, self-powered CsPbBr perovskite nanonet photodetector.
Chem Commun (Camb)
July 2023
Hubei Key Laboratory of Optical Information and Pattern Recognition, Wuhan Institute of Technology, Wuhan, 430205, China.
We fabricated high-quality CsPbBr perovskite nanonet films with the assistance of polystyrene spheres, and constructed self-powered photodetectors (PDs) with an ITO/SnO/CsPbBr/carbon structure. By passivating the nanonet with different concentrations of 1-butyl-3-methylimidazolium bromide (BMIMBr) ionic liquid, we found that as the concentration of BMIMBr increases, the dark current of the device first decreases and then gradually increases, while the photocurrent remains essentially unchanged. Finally, the PD with 1 mg mL BMIMBr ionic liquid exhibited the best performance with a switch ratio of about 1.
View Article and Find Full Text PDFIn Situ Silver Nanonets for Flexible Stretchable Electrodes.
Int J Mol Sci
May 2023
Key Laboratory of Sensors, Beijing Information Science & Technology University, Beijing 100192, China.
Shape-controlled synthesis is an effective method for controlling the physicochemical properties of nanomaterials, especially single-crystal nanomaterials, but it is difficult to control the morphology of single-crystal metallic nanomaterials. Silver nanowires (AgNWs) are regarded as key materials for the new generation of human-computer interaction, which can be applied in large-scale flexible and foldable devices, large-size touch screens, transparent LED films, photovoltaic cells, etc. When used on a large scale, the junction resistance will be generated at the overlap between AgNWs and the conductivity will decrease.
View Article and Find Full Text PDFLead-Free Copper-Based Perovskite Nanonets for Deep Ultraviolet Photodetectors with High Stability and Better Performance.
Nanomaterials (Basel)
September 2022
Advanced Photonics Center, School of Electronic Science and Engineering, Southeast University, Nanjing 210096, China.
Considering practical application and commercialization, the research of non-toxic and stable halide perovskite and its application in the field of photoelectric detection have received great attention. However, there are relatively few studies on deep ultraviolet photodetectors, and the perovskite films prepared by traditional spin-coating method have disadvantages such as uneven grain size and irregular agglomeration, which limit their device performance. Herein, uniform and ordered CsCuI nanonet arrays are fabricated based on monolayer colloidal crystal (MCC) templates prepared with 1 μm polystyrene (PS) spheres, which enhance light-harvesting ability.
View Article and Find Full Text PDFGrowing vertical aligned mesoporous silica thin film on nanoporous substrate for enhanced degradation, drug delivery and bioactivity.
Bioact Mater
May 2021
State Key Laboratory of Military Stomatology & National Clinical Research Center for Oral Diseases & Shaanxi Key Laboratory of Oral Diseases, Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University, Xi'an, 710032, China.
Mesoporous silica thin film has been widely used in various fields, particularly the medical implant coating for drug delivery. However, some drawbacks remain with the films produced by traditional method (evaporation-induced self-assembly, EISA), such as the poor permeability caused by their horizontal aligned mesochannels. In this study, the vertical aligned mesoporous silica thin film (VMSTF) is uniformly grown alongside the walls of titania nanotubes array via a biphase stratification growth method, resulting in a hierarchical two-layered nanotubular structure.
View Article and Find Full Text PDF