98%
921
2 minutes
20
In the present work, we report on the investigation of low-temperature (300-5 K) thermoelectric properties of hot-pressed TiSe2, a charge-density-wave (CDW) material. We demonstrate that, with increasing hot-pressing temperature, the density of TiSe2 increases and becomes nonstoichiometric owing to the loss of selenium. X-ray diffraction, scanning electron microscopy, and transimission electron microscopy results show that the material consists of a layered microstructure with several defects. Increasing the hot-press temperature in nonstoichiometric TiSe2 leads to a reduction of the resistivity and enhancement of the Seebeck coefficient in concomitent with suppression of CDW. Samples hot-pressed at 850 °C exhibited a minimum thermal conductivity (κ) of 1.5 W/m·K at 300 K that, in turn, resulted in a figure-of-merit (ZT) value of 0.14. This value is higher by 6 orders of magnitude compared to 1.49 × 10(-7) obtained for cold-pressed samples annealed at 850 °C. The enhancement of ZT in hot-pressed samples is attributed to (i) a reduced thermal conductivity owing to enhanced phonon scattering and (ii) improved power factor (α(2)σ).
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/am503477z | DOI Listing |
ACS Omega
September 2025
Sinopec Key Laboratory of Research and Application of Medical and Hygienic Materials Sinopec (Beijing) Research Institute of Chemical Industry Co., Ltd., 14 Beisanhuan East Road, Chao Yang District, Beijing 100013, P. R. China.
With the rapid development of precision medicine and the continuous evolution of smart wearable devices, photothermal materials (PTMs) are experiencing a tremendous opportunity for growth. PTMs can efficiently convert light energy into heat to achieve localized thermal therapy for specific cells or tissues, offering advantages of minimal invasiveness, high selectivity, and precise targeting. Furthermore, PTMs can serve as molecular imaging probes and smart drug carriers, integrating multiple functions such as bioimaging and drug delivery to realize the visualization and controlled release of therapeutic processes.
View Article and Find Full Text PDFSci Adv
September 2025
Department of Physics, State Key Laboratory of Quantum Functional Materials, and Guangdong Basic Research Center of Excellence for Quantum Science, Southern University of Science and Technology, Shenzhen 518055, China.
Here, we demonstrate unconventional scalable and sustainable manufacturing of flexible n-type BiTe films via physical vapor deposition and homo-layer fusion engineering. The achieved ultrahigh power factor of up to 30.0 microwatts per centimeter per square kelvin and ultralow lattice thermal conductivity of 0.
View Article and Find Full Text PDFACS Appl Mater Interfaces
September 2025
Plasmonics and Perovskites Laboratory, Department of Materials Science and Engineering, IIT Kanpur, Kanpur, U.P. 208016, India.
Contrary to the state-of-the-art thermoelectrics, such as tellurides and selenides, the thermoelectric performance of earth-abundant and less toxic BiS has been found to be inferior primarily because of poor electron transport. Herein, a less explored approach of composite formation using nanoinclusions of two-dimensional (2D) MXene, a graphene-analogous material, in BiS has been adopted to tailor the transport properties in order to obtain enhanced thermoelectric figure of merit (). Highly conductive stacked sheets of TiCT MXene, incorporated into the matrix of BiS, facilitate smoother electron transport, resulting in significantly enhanced electrical conductivity.
View Article and Find Full Text PDFOpen Res Eur
August 2025
Department of Industrial Systems Engineering and Design, Universitat Jaume I, Castelló de la Plana, Valencian Community, 12006, Spain.
Background: Thermoelectric (TE) materials can directly convert heat into electricity, which is beneficial for energy sustainability. Organic conducting polymers are TE materials that have drawn significant attention owing to different favorable properties, such as good processability, availability, flexibility, and intrinsically low thermal conductivity. Among the organic TEs, poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is the most extensively investigated material because of its stability and high electrical conductivity.
View Article and Find Full Text PDFACS Appl Mater Interfaces
September 2025
School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094, China.
Here, Pb/Y codoped SnSe nanorods were fabricated via a bottom-up, cost-effective hydrothermal method. The formation of nanorod structures generating high-density grain boundaries significantly enhances phonon scattering, serving as the primary mechanism for lattice thermal conductivity reduction. Furthermore, Y-element enrichment regions, nanoprecipitates, and dense dislocation networks provide additional phonon scattering that further suppresses phonon transport.
View Article and Find Full Text PDF