Hybrid Polystyrene-Plasmonic Systems as High Binding Density Biosensing Platforms.

Sensitive, accurate, and early detection of biomarkers is essential for prompt response to medical decisions for saving lives. Some infectious diseases are deadly even in small quantities and require early detection for patients and public health. The scarcity of these biomarkers necessitates signal amplification before diagnosis.

Development of High Surface Area Organosilicate Nanoparticulate Thin Films for Use in Sensing Hydrophobic Compounds in Sediment and Water.

The scope of this study was to apply advances in materials science, specifically the use of organosilicate nanoparticles as a high surface area platform for passive sampling of chemicals or pre-concentration for active sensing in multiple-phase complex environmental media. We have developed a novel nanoporous organosilicate (NPO) film as an extraction phase and proof of concept for application in adsorbing hydrophobic compounds in water and sediment. We characterized the NPO film properties and provided optimization for synthesis and coatings in order to apply the technology in environmental media.

Applications of machine learning tools for ultra-sensitive detection of lipoarabinomannan with plasmonic grating biosensors in clinical samples of tuberculosis.

Background: Tuberculosis is one of the top ten causes of death globally and the leading cause of death from a single infectious agent. Eradicating the Tuberculosis epidemic by 2030 is one of the top United Nations Sustainable Development Goals. Early diagnosis is essential to achieving this goal because it improves individual prognosis and reduces transmission rates of asymptomatic infected.

Surface Plasmon Enhanced Fluorescence Temperature Mapping of Aluminum Nanoparticle Heated by Laser.

Partially aggregated Rhodamine 6G (R6G) dye is used as a lights-on temperature sensor to analyze the spatiotemporal heating of aluminum nanoparticles (Al NPs) embedded within a tetrafluoroethylene, hexafluoropropylene, and vinylidene fluoride (THV) fluoropolymer matrix. The embedded Al NPs were photothermally heated using an IR laser, and the fluorescent intensity of the embedded dye was monitored in real time using an optical microscope. A plasmonic grating substrate enhanced the florescence intensity of the dye while increasing the optical resolution and heating rate of Al NPs.

Synchronized Electromechanical Shock Wave-Induced Bacterial Transformation.

We report a simple device that generates synchronized mechanical and electrical pressure waves for carrying out bacterial transformation. The mechanical pressure waves are produced by igniting a confined nanoenergetic composite material that provides ultrahigh pressure. Further, this device has an arrangement through which a synchronized electric field (of a time-varying nature) is initiated at a delay of ≈85 μs at the full width half-maxima point of the pressure pulse.

Ultrasensitive detection of lipoarabinomannan with plasmonic grating biosensors in clinical samples of HIV negative patients with tuberculosis.

Background: Timely diagnosis of tuberculosis disease is critical for positive patient outcomes, yet potentially millions go undiagnosed or unreported each year. Sputum is widely used as the testing input, but limited by its complexity, heterogeneity, and sourcing problems. Finding methods to interrogate noninvasive, non-sputum clinical specimens is indispensable to improving access to tuberculosis diagnosis and care.

Nanoscale surface reactions by laser irradiation of Al nanoparticles on MoO flakes.

Surface reactions between heated aluminum nanoparticles (Al NPs) and thin α-MoO sheets are investigated. Localized photothermal heating on Al NP clusters is provided by a Raman spectrometer laser, while enhanced heating rates and imaging resolution are enabled by the use of a plasmonic grating substrate. Prominent linear reaction zones extending from Al NPs in the 〈001〉 crystal direction are observed on the surface of the host MoO sheets after heating.

Enhanced fluorescence for in situ temperature mapping of photothermally heated aluminum nanoparticles enabled by a plasmonic grating substrate.

In situ dynamic temperature mapping of photothermally heated aluminum nanoparticles (Al NPs) embedded in a fluoropolymer (THV) is achieved using fluorescent dye (rhodamine 6G). A plasmonic grating substrate enhances the dye fluorescence intensity by a factor of seven over a glass substrate, to enable image capture rates of 500 frames per second. Further, the fluorescence intensity is linearly related to temperature and reversible.

In Situ Characterization of Photothermal Nanoenergetic Combustion on a Plasmonic Microchip.

Plasmonic gratings facilitate a robust in situ diagnostic platform for photothermal combustion of nanoenergetic composite thin films using an optical microscope and a high-speed camera. Aluminum nanoparticles (Al NPs) embedded in a fluoropolymer oxidizer are cast onto a plasmonic grating microchip and ignited using a low-power laser. The plasmonic grating enhances both spatial resolution and sufficient photothermal coupling to combust small Al NP clusters, initiating localized flames as small as 600 nm in size.

Single-Molecule Surface Plasmon-Coupled Emission with Plasmonic Gratings.

The ability to image single molecules (SM) has been the dream of scientists for centuries, and because of the substantial recent advances in microscopy, individual fluorescent molecules can now be observed on a regular basis. However, the development of such imaging systems was not without dilemmas, such as the detection and separation of individual fluorescence emissions. One method to solve this problem utilized surface plasmon resonance (SPR) to enhance the emission intensity of SMs.

Plasmonic nano-protrusions: hierarchical nanostructures for single-molecule Raman spectroscopy.

Classical methods for enhancing the electromagnetic field from substrates for spectroscopic applications, such as surface-enhanced Raman spectroscopy (SERS), have involved the generation of hotspots through directed self-assembly of nanoparticles or by patterning nanoscale features using expensive nanolithography techniques. A novel large-area, cost-effective soft lithographic technique involving glancing angle deposition (GLAD) of silver on polymer gratings is reported here. This method produces hierarchical nanostructures with high enhancement factors capable of analyzing single-molecule SERS.

Barrier Modification of Metal-contact on Silicon by Sub-2 nm Platinum Nanoparticles and Thin Dielectrics.

We report metal/p-Si contact barrier modification through the introduction of either "isolated" or "nonisolated" tilted-target-sputtered sub-2 nm platinum nanoparticles (Pt NPs) in combination with either a 0.98 nm Atomic Layer Deposited Al2O3 or a 1.6 nm chemically grown SiO2 dielectric layer, or both.

Room temperature Coulomb blockade effects in Au nanocluster/pentacene single electron transistors.

Single-electron transistors incorporating single ∼1 nm gold nanocluster (AuNCs) and pentacene as a complex charge transport system have been used to study the quantum Coulomb blockade and its single electron tunnelling behaviour at room temperature (RT) (300 K). Monodisperse ultra-small (0.86 ± 0.

Dye-doped organosilicate nanoparticles as cell-preserving labels for photoacoustic signal generation.

Nanoparticle-assisted ultrasound generation by pulsed laser or photoacoustic (PA) techniques has been employed in the study of several tissues both in vivo and in vitro. Among the many applications of this technology, the detection of few cells in vitro is of particular interest. However, the toxicity induced by laser irradiation used for PA signal generation, whether in the absence or the presence of PA enhancers, within single isolated cells has not yet been investigated in detail.

Single-Molecule Detection in Nanogap-Embedded Plasmonic Gratings.

We introduce nanogap-embedded silver plasmonic gratings for single-molecule (SM) visualization using an epifluorescence microscope. This silver plasmonic platform was fabricated by a cost-effective nano-imprint lithography technique, using an HD DVD template. DNA/ RNA duplex molecules tagged with Cy3/Cy5 fluorophores were immobilized on SiO-capped silver gratings.

Coatings and surface modifications imparting antimicrobial activity to orthopedic implants.

Bacterial colonization and biofilm formation on an orthopedic implant surface is one of the worst possible outcomes of orthopedic intervention in terms of both patient prognosis and healthcare costs. Making the problem even more vexing is the fact that infections are often caused by events beyond the control of the operating surgeon and may manifest weeks to months after the initial surgery. Herein, we review the costs and consequences of implant infection as well as the methods of prevention and management.

A versatile self-assembly approach toward high performance nanoenergetic composite using functionalized graphene.

Exploiting the functionalization chemistry of graphene, long-range electrostatic and short-range covalent interactions were harnessed to produce multifunctional energetic materials through hierarchical self-assembly of nanoscale oxidizer and fuel into highly reactive macrostructures. Specifically, we report a methodology for directing the self-assembly of Al and Bi2O3 nanoparticles on functionalized graphene sheets (FGS) leading to the formation of nanocomposite structures in a colloidal suspension phase that ultimately condense into ultradense macrostructures. The mechanisms driving self-assembly were studied using a host of characterization techniques including zeta potential measurements, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), particle size analysis, micro-Raman spectroscopy, and electron microscopy.

Nanomaterial processing using self-assembly-bottom-up chemical and biological approaches.

Nanotechnology is touted as the next logical sequence in technological evolution. This has led to a substantial surge in research activities pertaining to the development and fundamental understanding of processes and assembly at the nanoscale. Both top-down and bottom-up fabrication approaches may be used to realize a range of well-defined nanostructured materials with desirable physical and chemical attributes.

Sub-2 nm size and density tunable platinum nanoparticles using room temperature tilted-target sputtering.

This paper describes a tilted-target RF magnetron sputter deposition system to grow nanoparticles in a controlled way. With detailed characterization of ultra-high density (up to 1.1 × 10¹³ cm⁻²) and ultra-small size Pt nanoparticles (0.

Ultra-rapid elimination of biofilms via the combustion of a nanoenergetic coating.

Background: Biofilms occur on a wide variety of surfaces including metals, ceramics, glass etc. and often leads to accumulation of large number of various microorganisms on the surfaces. This biofilm growth is highly undesirable in most cases as biofilms can cause degradation of the instruments and its performance along with contamination of the samples being processed in those systems.

Femtogram-level detection of Clostridium botulinum neurotoxin type A by sandwich immunoassay using nanoporous substrate and ultra-bright fluorescent suprananoparticles.

We report a simple, robust fluorescence biosensor for the ultra-sensitive detection of Clostridium botulinum Neurotoxin Type A (BoNT/A) in complex, real-world media. High intrinsic signal amplification was achieved through the combined use of ultra-bright, photostable dye-doped nanoparticle (DOSNP) tags and high surface area nanoporous organosilicate (NPO) thin films. DOSNP with 22 nm diameter were synthesized with more than 200 times equivalent free dye fluorescence and conjugated to antibodies with average degree of substitution of 90 dyes per antibody, representing an order of magnitude increase compared with conventional dye-labeled antibodies.

Confeito-like assembly of organosilicate-caged fluorophores: ultrabright suprananoparticles for fluorescence imaging.

We report ultrabright, photostable, sub-25 nm nanoparticle agglomerates (suprananoparticles) assembled from a few hundred 3.3 ± 0.9 nm units, each hosting on average a single rhodamine 6G (Rh6G) dye molecule encased in a thin organosilicate cage.

Sputter-deposition of silver nanoparticles into ionic liquid as a sacrificial reservoir in antimicrobial organosilicate nanocomposite coatings.

We present a new approach for fabricating robust, regenerable antimicrobial coatings containing an ionic liquid (IL) phase incorporating silver nanoparticles (AgNPs) as a reservoir for Ag(0)/Ag(+) species within sol-gel-derived nanocomposite films integrating organosilicate nanoparticles. The IL serves as an ultralow volatility (vacuum-compatible) liquid target, allowing for the direct deposition and dispersion of a high-density AgNP "ionosol" following conventional sputtering techniques. Two like-anion ILs were investigated in this work: methyltrioctylammonium bis(trifluoromethylsulfonyl)imide, [N(8881)][Tf(2)N], and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [emim][Tf(2)N].

Sub-minute formation of supported nanoporous mesoscale patterns programmed by surface energy.

We demonstrate an original and powerful concept for elaborating spontaneous, high fidelity patterns of nanoporosity from nanoscale building blocks using patterned surface chemistry (i.e., "surface energy gating") to corral the growth of colloidal structures at a solid surface.

Entropy driven spontaneous formation of highly porous films from polymer-nanoparticle composites.

Nanoporous materials have become indispensable in many fields ranging from photonics, catalysis and semiconductor processing to biosensor infrastructure. Rapid and energy efficient process fabrication of these materials is, however, nontrivial. In this communication, we describe a simple method for the rapid fabrication of these materials from colloidal dispersions of Polymethyl Silsesquioxane nanoparticles.