Crystal Growth Modulation of Tin-Lead Halide Perovskites via Chaotropic Agent.

Mixed tin-lead (Sn-Pb) halide perovskites, with their tunable bandgaps (1.2-1.4 eV), show great promise for the development of highly efficient all-perovskite tandem solar cells.

Unveiling the Role of Guanidinium for Enhanced Charge Extraction in Inverted Perovskite Solar Cells.

The incorporation of guanidinium (Gua) cations has significantly enhanced the optoelectronic properties of various perovskite compositions. When combined with other A-site cations in perovskite solar cells (PSCs), Gua cations not only enhance the power conversion efficiency of the solar cells but often improve their overall stability. While most studies examining the impact of Gua focus on PSCs with the n-i-p (conventional) structure, fewer have investigated its effects on the mechanism and performance of the p-i-n (inverted) structure.

Donor-Interacting Arylated Carbazole Self-Assembled Monolayer Enables Highly Efficient and Stable Organic Photovoltaics.

Carbazole-derived self-assembled monolayers (SAMs) are promising materials for hole-extraction layer (HEL) in conventional organic photovoltaics (OPVs). Here, a SAM Cbz-2Ph derived from 3,6-diphenylcarbazole is demonstrated. The large molecular dipole moment of Cbz-2Ph allows the modulation of electrode work function to facilitate hole extraction and maximize photovoltage, thus improving the OPV performance.

Overcoming Microstructural Defects at the Buried Interface of Formamidinium-Based Perovskite Solar Cells.

Since the advent of formamidinium (FA)-based perovskite photovoltaics (PVs), significant performance enhancements have been achieved. However, a critical challenge persists: the propensity for void formation in the perovskite film at the buried perovskite-interlayer interface has a deleterious effect on device performance. With most emerging perovskite PVs adopting the p-i-n architecture, the specific challenge lies at the perovskite-hole transport layer (HTL) interface, with previous strategies to overcome this limitation being limited to specific perovskite-HTL combinations; thus, the lack of universal approaches represents a bottleneck.

Enhancing the Efficiency and Stability of Tin-Lead Perovskite Solar Cells via Sodium Hydroxide Dedoping of PEDOT:PSS.

Tin-lead (Sn-Pb) perovskite solar cells (PSCs) have gained interest as candidates for the bottom cell of all-perovskite tandem solar cells due to their broad absorption of the solar spectrum. A notable challenge arises from the prevalent use of the hole transport layer, PEDOT:PSS, known for its inherently high doping level. This high doping level can lead to interfacial recombination, imposing a significant limitation on efficiency.

Development and Validation of a 3D Resnet Model for Prediction of Lymph Node Metastasis in Head and Neck Cancer Patients.

The accurate diagnosis and staging of lymph node metastasis (LNM) are crucial for determining the optimal treatment strategy for head and neck cancer patients. We aimed to develop a 3D Resnet model and investigate its prediction value in detecting LNM. This study enrolled 156 head and neck cancer patients and analyzed 342 lymph nodes segmented from surgical pathologic reports.

Biotoxicity of Halide Perovskites in Mice.

Halide perovskites are crystalline semiconductors with exceptional optoelectronic properties, rapidly developing toward large-scale applications. Lead (II) (Pb ) is the core element used to prepare halide perovskites. Pb can displace key 2+ elements, including calcium, zinc and iron, that regulate vital physiological functions.

Ambient Fabrication of Organic-Inorganic Hybrid Perovskite Solar Cells.

Organic-inorganic hybrid perovskite solar cells (PSCs) have attracted significant attention in recent years due to their high-power conversion efficiency, simple fabrication, and low material cost. However, due to their high sensitivity to moisture and oxygen, high efficiency PSCs are mainly constructed in an inert environment. This has led to significant concerns associated with the long-term stability and manufacturing costs, which are some of the major limitations for the commercialization of this cutting-edge technology.

Phosphorene Nanoribbon-Augmented Optoelectronics for Enhanced Hole Extraction.

Phosphorene nanoribbons (PNRs) have been widely predicted to exhibit a range of superlative functional properties; however, because they have only recently been isolated, these properties are yet to be shown to translate to improved performance in any application. PNRs show particular promise for optoelectronics, given their predicted high exciton binding energies, tunable bandgaps, and ultrahigh hole mobilities. Here, we verify the theorized enhanced hole mobility in both solar cells and space-charge-limited-current devices, demonstrating the potential for PNRs improving hole extraction in universal optoelectronic applications.

Additive-Free, Low-Temperature Crystallization of Stable α-FAPbI Perovskite.

Formamidinium lead triiodide (FAPbI ) is attractive for photovoltaic devices due to its optimal bandgap at around 1.45 eV and improved thermal stability compared with methylammonium-based perovskites. Crystallization of phase-pure α-FAPbI conventionally requires high-temperature thermal annealing at 150 °C whilst the obtained α-FAPbI is metastable at room temperature.

A Comparison of Charge Carrier Dynamics in Organic and Perovskite Solar Cells.

The charge carrier dynamics in organic solar cells and organic-inorganic hybrid metal halide perovskite solar cells, two leading technologies in thin-film photovoltaics, are compared. The similarities and differences in charge generation, charge separation, charge transport, charge collection, and charge recombination in these two technologies are discussed, linking these back to the intrinsic material properties of organic and perovskite semiconductors, and how these factors impact on photovoltaic device performance is elucidated. In particular, the impact of exciton binding energy, charge transfer states, bimolecular recombination, charge carrier transport, sub-bandgap tail states, and surface recombination is evaluated, and the lessons learned from transient optical and optoelectronic measurements are discussed.

Correlating the Active Layer Structure and Composition with the Device Performance and Lifetime of Amino-Acid-Modified Perovskite Solar Cells.

Additive engineering is emerging as a powerful strategy to further enhance the performance of perovskite solar cells (PSCs), with the incorporation of bulky cations and amino acid (AA) derivatives being shown as a promising strategy for enhanced device stability. However, the incorporation of such additives typically results in photocurrent losses owing to their saturated carbon backbones, hindering charge transport and collection. Here, we investigate the use of AAs with varying carbon chain lengths as zwitterionic additives to enhance the PSC device stability, in air and nitrogen, under illumination.

ZnO-PCBM bilayers as electron transport layers in low-temperature processed perovskite solar cells.

We investigate an electron transport bilayer fabricated at <110 °C to form all low-temperature processed, thermally stable, efficient perovskite solar cells with negligible hysteresis. The components of the bilayer create a symbiosis that results in improved devices compared with either of the components being used in isolation. A sol-gel derived ZnO layer facilitates improved energy level alignment and enhanced charge carrier extraction and a [6,6]-phenyl-C-butyric acid methyl ester (PCBM) layer to reduce hysteresis and enhance perovskite thermal stability.

Valproic acid mediates the synaptic excitatory/inhibitory balance through astrocytes--a preliminary study.

Valproic acid (VPA) is one of the most widely used anticonvulsant and mood-stabilizing agents for the treatment of epilepsy and bipolar disorder. However, the underlying therapeutic mechanisms of the treatment of each disease remain unclear. Recently, the anti-epileptic effect of VPA has been found to lead to modulation of the synaptic excitatory/inhibitory balance.