Photoelectrochemical approaches for the conversion of lignin at room temperature.

The selective cleavage of C-C/C-O linkages represents a key step toward achieving the chemical conversion of biomass to targeted value-added chemical products under ambient conditions. Using photoelectrosynthetic solar cells is a promising method to address the energy intensive depolymerization of lignin for the production of biofuels and valuable chemicals. This feature article gives an in-depth overview of recent progress using dye-sensitized photoelectrosynthetic solar cells (DSPECs) to initiate the cleavage of C-C/C-O bonds in lignin and related model compounds.

BiVO Photoanodes for TEMPO-Mediated Benzyl Alcohol Oxidation in Organic Media.

The photoelectrochemical production of fuels, exemplified by light-driven water splitting to hydrogen and oxygen, offers a sustainable option to offset dependence on fossil fuels. A low-cost, efficient, and stable photoelectrochemical approach to solar fuels remains elusive but using similar materials and photoelectrodes for chemical production or biomass conversion offers an appealing alternative. This work reports a facile method for fabricating pristine (undoped) BiVO photoanodes to carry out TEMPO-mediated benzyl alcohol oxidation to benzaldehyde in organic media (TEMPO=2,2,6,6-tetramethylpiperidinyl-N-oxyl).

Enhanced Photocatalytic Alcohol Oxidation at the Interface of RuC-Coated TiO Nanorod Arrays.

Visible-light-driven organic oxidations carried out under mild conditions offer a sustainable approach to performing chemical transformations important to the chemical industry. This work reports an efficient photocatalytic benzyl alcohol oxidation process using one-dimensional (1D) TiO nanorod (NR)-based photoanodes with surface-adsorbed ruthenium polypyridyl photocatalysts at room temperature. The photocatalyst bis(2,2'-bipyridine)(4,4'-dicarboxy-2,2'-bipyridine)Ru(II) (RuC) was covalently anchored onto TiO nanorod arrays grown on fluorine-doped tin oxide (FTO) electrode surfaces (FTO|t-TiO|RuC, = the thickness of TiO NR).

Sustainable hydrogen production from water using tandem dye-sensitized photoelectrochemical cells.

If generated from water using renewable energy, hydrogen could serve as a carbon-zero, environmentally benign fuel to meet the needs of modern society. Photoelectrochemical cells integrate the absorption and conversion of solar energy and chemical catalysis for the generation of high value products. Tandem photoelectrochemical devices have demonstrated impressive solar-to-hydrogen conversion efficiencies but have not become economically relevant due to high production cost.

Photocatalytic hydrogen evolution from biomass conversion.

Biomass has incredible potential as an alternative to fossil fuels for energy production that is sustainable for the future of humanity. Hydrogen evolution from photocatalytic biomass conversion not only produces valuable carbon-free energy in the form of molecular hydrogen but also provides an avenue of production for industrially relevant biomass products. This photocatalytic conversion can be realized with efficient, sustainable reaction materials (biomass) and inexhaustible sunlight as the only energy inputs.

A molecular tandem cell for efficient solar water splitting.

Artificial photosynthesis provides a way to store solar energy in chemical bonds. Achieving water splitting without an applied external potential bias provides the key to artificial photosynthetic devices. We describe here a tandem photoelectrochemical cell design that combines a dye-sensitized photoelectrosynthesis cell (DSPEC) and an organic solar cell (OSC) in a photoanode for water oxidation.

Hydrogen Peroxide Disproportionation with Manganese Macrocyclic Complexes of Cyclen and Pyclen.

The catalase family of enzymes, which include a variety with a binuclear manganese active site, mitigate the risk from reactive oxygen species by facilitating the disproportionation of hydrogen peroxide into molecular oxygen and water. In this work, hydrogen peroxide disproportionation using complexes formed between manganese and cyclen or pyclen were investigated due to the spectroscopic similarities with the native MnCAT enzyme. Potentiometric titrations were used to construct speciation diagrams that identify the manganese complex compositions at different pH values.

A stable dye-sensitized photoelectrosynthesis cell mediated by a NiO overlayer for water oxidation.

In the development of photoelectrochemical cells for water splitting or CO reduction, a major challenge is O evolution at photoelectrodes that, in behavior, mimic photosystem II. At an appropriate semiconductor electrode, a water oxidation catalyst must be integrated with a visible light absorber in a stable half-cell configuration. Here, we describe an electrode consisting of a light absorber, an intermediate electron donor layer, and a water oxidation catalyst for sustained light driven water oxidation catalysis.

A donor-chromophore-catalyst assembly for solar CO reduction.

We describe here the preparation and characterization of a photocathode assembly for CO reduction to CO in 0.1 M LiClO acetonitrile. The assembly was formed on 1.

Molecular Photoelectrode for Water Oxidation Inspired by Photosystem II.

In artificial photosynthesis, the sun drives water splitting into H and O or converts CO into a useful form of carbon. In most schemes, water oxidation is typically the limiting half-reaction. Here, we introduce a molecular approach to the design of a photoanode that incorporates an electron acceptor, a sensitizer, an electron donor, and a water oxidation catalyst in a single molecular assembly.

Stabilized photoanodes for water oxidation by integration of organic dyes, water oxidation catalysts, and electron-transfer mediators.

Stabilized photoanodes for light-driven water oxidation have been prepared on nanoparticle core/shell electrodes with surface-stabilized donor-acceptor chromophores, a water oxidation catalyst, and an electron-transfer mediator. For the electrode, fluorine-doped tin oxide FTO|SnO/TiO|-Org1-|1.1 nm AlO|-RuP-WOC (water oxidation catalyst) with Org1 (1-cyano-2-(4-(diphenylamino)phenyl)vinyl)phosphonic acid), the mediator RuP ([Ru(4,4-(POH)-2,2-bipyridine)(2,2-bipyridine)]), and the WOC, Ru(bda)(py(CH)P(OH)) (bda is 2,2-bipyridine-6,6-dicarboxylate with x = 3 or 10), solar excitation resulted in photocurrents of ∼500 µA/cm and quantitative O evolution at pH 4.

Light-Driven Water Splitting Mediated by Photogenerated Bromine.

Light-driven water splitting was achieved using a dye-sensitized mesoporous oxide film and the oxidation of bromide (Br ) to bromine (Br ) or tribromide (Br ). The chemical oxidant (Br or Br ) is formed during illumination at the photoanode and used as a sacrificial oxidant to drive a water oxidation catalyst (WOC), here demonstrated using [Ru(bda)(pic) ], (1; pic=picoline, bda=2,2'-bipyridine-6,6'-dicarboxylate). The photochemical oxidation of bromide produces a chemical oxidant with a potential of 1.

Polymer-based chromophore-catalyst assemblies for solar energy conversion.

The synthesis of polymer-based assemblies for light harvesting has been motivated by the multi-chromophore antennas that play a role in natural photosynthesis for the potential use in solar conversion technologies. This review describes a general strategy for using polymer-based chromophore-catalyst assemblies for solar-driven water oxidation at a photoanode in a dye-sensitized photoelectrochemical cell (DSPEC). This report begins with a summary of the synthetic methods and fundamental photophysical studies of light harvesting polychormophores in solution which show these materials can transport excited state energy to an acceptor where charge-separation can occur.

Interfacial Deposition of Ru(II) Bipyridine-Dicarboxylate Complexes by Ligand Substitution for Applications in Water Oxidation Catalysis.

Water oxidation is a critical step in artificial photosynthesis and provides the protons and electrons used in reduction reactions to make solar fuels. Significant advances have been made in the area of molecular water oxidation catalysts with a notable breakthrough in the development of Ru(II) complexes that use a planar "bda" ligand (bda is 2,2'-bipyridine-6,6'-dicarboxylate). These Ru(II)(bda) complexes show lower overpotentials for driving water oxidation making them ideal for light-driven applications with a suitable chromophore.

Mechanisms of molecular water oxidation in solution and on oxide surfaces.

Initial experiments on water oxidation by well-defined molecular catalysts were initiated with the goal of finding solutions to solar energy conversion. This account is a summary of research in this area by the T. J.

Modulating Hole Transport in Multilayered Photocathodes with Derivatized p-Type Nickel Oxide and Molecular Assemblies for Solar-Driven Water Splitting.

For solar water splitting, dye-sensitized NiO photocathodes have been a primary target. Despite marginal improvement in performance, limitations remain arising from the intrinsic disadvantages of NiO and insufficient catalysis. We report here a new approach to modifying NiO photocathodes with doped NiO bilayers and an additional layer of macro-mesoporous ITO.

Plasmon-enhanced light-driven water oxidation by a dye-sensitized photoanode.

Dye-sensitized photoelectrosynthesis cells (DSPECs) provide a flexible approach for solar water splitting based on the integration of molecular light absorption and catalysis on oxide electrodes. Recent advances in this area, including the use of core/shell oxide interfacial structures and surface stabilization by atomic layer deposition, have led to improved charge-separation lifetimes and the ability to obtain substantially improved photocurrent densities. Here, we investigate the introduction of Ag nanoparticles into the core/shell structure and report that they greatly enhance light-driven water oxidation at a DSPEC photoanode.

Layer-by-Layer Molecular Assemblies for Dye-Sensitized Photoelectrosynthesis Cells Prepared by Atomic Layer Deposition.

In a dye sensitized photoelectrosynthesis cell (DSPEC), the relative orientation of the catalyst and chromophore plays an important role in determining the device efficiency. Here we introduce a new, robust atomic layer deposition (ALD) procedure for the preparation of molecular chromophore-catalyst assemblies on wide bandgap semiconductors. In this procedure, solution deposited, phosphonate derivatized metal complexes on metal oxide surfaces are treated with reactive metal reagents in the gas phase by ALD to form an outer metal ion bridging group, which can bind a second phosphonate containing species from solution to establish a R-PO-O-M-O-PO-R type surface assembly.

Polymer Chromophore-Catalyst Assembly for Solar Fuel Generation.

A polystyrene-based chromophore-catalyst assembly (poly-2) has been synthesized and assembled at a mesoporous metal oxide photoanode. The assembly contains water oxidation catalyst centers based on [Ru(trpy) (phenq)] (Ru-Cat) and [Ru(bpy)] derivatives (Ru-C) as chromophores (trpy= 2,2';6,2″- terpyridine, phenq = 2-(quinol-8'-yl)-1,10-phenanthroline and bpy = 2,2'-bipyridine). The photophysical and electrochemical properties of the polychromophore-oxidation catalyst assembly were investigated in solution and at the surface of mesoporous metal oxide films.

Inner Layer Control of Performance in a Dye-Sensitized Photoelectrosynthesis Cell.

Interfacial charge transfer and core-shell structures play important roles in dye-sensitized photoelectrosynthesis cells (DSPEC) for water splitting into H and O. An important element in the design of the photoanode in these devices is a core/shell structure which controls local electron transfer dynamics. Here, we introduce a new element, an internal layer of AlO lying between the Sb:SnO/TiO layers in a core/shell electrode which can improve photocurrents by up to 300%.

All-in-One Derivatized Tandem pn-Silicon-SnO/TiO Water Splitting Photoelectrochemical Cell.

Mesoporous metal oxide film electrodes consisting of derivatized 5.5 μm thick SnO films with an outer 4.3 nm shell of TiO added by atomic layer deposition (ALD) have been investigated to explore unbiased water splitting on p, n, and pn type silicon substrates.

A Dye-Sensitized Photoelectrochemical Tandem Cell for Light Driven Hydrogen Production from Water.

Tandem junction photoelectrochemical water-splitting devices, whereby two light absorbing electrodes targeting separate portions of the solar spectrum generate the voltage required to convert water to oxygen and hydrogen, enable much higher possible efficiencies than single absorber systems. We report here on the development of a tandem system consisting of a dye-sensitized photoelectrochemical cell (DSPEC) wired in series with a dye-sensitized solar cell (DSC). The DSPEC photoanode incorporates a tris(bipyridine)ruthenium(II)-type chromophore and molecular ruthenium based water oxidation catalyst.

Two Electrode Collector-Generator Method for the Detection of Electrochemically or Photoelectrochemically Produced O2.

A dual working electrode technique for the in situ production and quantification of electrochemically or photoelectrochemically produced O2 is described. This technique, termed a collector-generator cell, utilizes a transparent fluorine doped tin oxide electrode to sense O2. This setup is specifically designed for detecting O2 in dye sensitized photoelectrosynthesis cells.

Efficient Light-Driven Oxidation of Alcohols Using an Organic Chromophore-Catalyst Assembly Anchored to TiO2.

The ligand 5-PO3H2-2,2':5',2″-terthiophene-5-trpy, T3 (trpy = 2,2':6',2″-terpyridine), was prepared and studied in aqueous solutions along with its metal complex assembly [Ru(T3)(bpy)(OH2)](2+) (T3-Ru-OH2, bpy = 2,2'-bipyridine). T3 contains a phosphonic acid group for anchoring to a TiO2 photoanode under aqueous conditions, a terthiophene fragment for light absorption and electron injection into TiO2, and a terminal trpy ligand for the construction of assemblies comprising a molecular oxidation catalyst. At a TiO2 photoanode, T3 displays efficient injection at pH 4.