Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Context: A novel 2D InN/GaN lateral heterostructure (LHT) was simulated by stitching monolayer of 2D InN and monolayer of 2D GaN. The structural stability, electronic structure, and optical properties were systematically investigated using first-principle calculations and by considering the effects of strain. The results indicated that the designed heterostructure has a direct bandgap of 2.26 eV which is further affected by applied biaxial strain. The bandgap of 2D InN/GaN lateral heterostructure decreases with the increase in biaxial strain, and tensile strain triggers a direct-to-indirect energy gap changeover at + 6%. Additionally, under compressive strain, heterostructure remains a direct bandgap semiconductor. Furthermore, the strain significantly affects the optical characteristics of lateral heterostructure. It has been noticed that the first optical absorption peak moves from 2.51 eV (ɛ =  - 4%) to 1.40 eV (ɛ = 10%). Therefore, 2D InN/GaN lateral heterostructure provides an approachable way for utilizing in optoelectronic devices through the creation of in-plane lateral heterostructures.

Methods: We performed all the computations using a self-consistent method based upon density functional theory. We used the PBEsol functional in the GGA to account for the exchange-correlation effects. We introduced a 10-Å vacuum region in the z-direction to avoid interaction between periodic images. We considered non-negligible weak dispersion correction in the lateral heterostructure using Grimme's DFT-D3 approach. In this study, we also computed the electrical and optical properties employing the local modified Becke-Johnson (lmBJ) exchange potential under meta-GGA functional to obtain more precise results.

Download full-text PDF

Source
http://dx.doi.org/10.1007/s00894-024-06121-wDOI Listing

Publication Analysis

Top Keywords

lateral heterostructure
16
heterostructure
8
optical properties
8
direct bandgap
8
biaxial strain
8
inn/gan lateral
8
strain
6
lateral
5
high-throughput screening
4
screening optoelectronic
4

Similar Publications

The growth of atomically flat CdSe nanoplatelets (NPLs) thicker than 5 monolayers (ML) remains a major challenge in colloidal semiconductor synthesis, particularly for core/crown heterostructures. Here we report the successful synthesis of zinc-blende CdSe NPLs with unprecedented thicknesses of 6 and 7 ML, exhibiting sharp photoluminescence at 579 and 596 nm, respectively. We demonstrate that these thick NPLs can serve as cores for CdSe/CdS core/crown heterostructures, confirmed by lateral size expansion and the emergence of characteristic CdS absorption features.

View Article and Find Full Text PDF

Neuromorphic systems that emulate the information transmission of biological neural networks face challenges in their integration owing to the disparate features of neuron- and synapse-mimicking devices, leading to complex and inefficient system architectures. Herein, the study proposes a steep-switching nonvolatile field-effect transistor leveraging a CuInPS/h-BN/WSe heterostructure to enable reconfigurable neuron- and synapse-modes by electrostatically modulating the carrier density of the channel to control its Fermi level, thereby facilitating leaky-integrate-and-fire (LiF) neuron operation. In addition, an additional ferroelectric-gating effect enhances the chemical potential of the channel through interactions between ferroelectric dipoles and channel carriers, allowing LiF operation at a reduced operating bias condition.

View Article and Find Full Text PDF

Integrating two-dimensional transition-metal dichalcogenides with graphene is attractive for low-power memory and neuromorphic hardware, yet sequential wet transfer leaves polymer residues and high contact resistance. We demonstrate a complementary metal-oxide-semiconductor (CMOS)-compatible, transfer-free route in which an atomically thin amorphous MoS precursor is RF-sputtered directly onto chemical vapor-deposited few-layer graphene and crystallized by confined-space sulfurization at 800 °C. Grazing-incidence X-ray reflectivity, Raman spectroscopy, and X-ray photoelectron spectroscopy confirm the formation of residue-free, three-to-four-layer 2H-MoS (roughness: 0.

View Article and Find Full Text PDF

Interlayer Electronic Hybridization for Friction Control in MoSe/WS Heterostructures.

Small

August 2025

State Key Laboratory of Tribology in Advanced Equipment, Tsinghua University, School of Mechanical Engineering, Beijing, 100084, China.

Van der Waals heterostructures, with atomically sharp interfaces and excellent optoelectronic properties, are prime building blocks for ultra-low-power nanoelectronics. Yet unavoidable interfacial friction in such micro/nanoscale stacks still throttles performance and reliability. Hybridized interlayer states are expected to flatten the sliding-energy landscape and curb frictional energy dissipation, yet their impact on friction remains unverified because electronic states and lateral forces are seldom measured in a directly comparable way.

View Article and Find Full Text PDF

Tunable bilayer WS-WSe and WS-MoS lateral heterostructures for self-powered photodetectors.

Nanoscale

August 2025

School of Physics, and Hunan Key Laboratory for Super-Microstructure and Ultrafast Process, and Hunan Key Laboratory of Nanophotonics and Devices, Central South University, Changsha 410083, China.

Two-dimensional lateral heterostructures based on transition metal dichalcogenides (TMDs) are promising for optoelectronics due to their layer thickness-dependent properties. Bilayer structures, in particular, offer advantages like enhanced electron mobility and improved stability. However, precisely controlling layer growth in these heterostructures remains a challenge.

View Article and Find Full Text PDF