Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
Water electrolysis to produce hydrogen (H) using renewable energy is one of the most promising candidates for realizing carbon neutrality, but its reaction kinetics is hindered by sluggish anodic oxygen evolution reaction (OER). Ruthenium (Ru) in its high-valence state (oxide) provides one of the most active OER sites and is less costly, but thermodynamically unstable. The strong interaction between Ru nanoparticles (NPs) and nickel hydroxide (Ni(OH)) is leveraged to directly form Ru-Ni(OH) on the surface of a porous nickel foam (NF) electrode via spontaneous galvanic replacement reaction. The formation of Ru─O─Ni bonds at the interface of the Ru NPs and Ni(OH) (Ru-Ni(OH)) on the surface oxidized NF significantly enhance stability of the Ru-Ni(OH)/NF electrode. In addition to OER, the catalyst is active enough for the hydrogen evolution reaction (HER). As a result, it is able to deliver overpotentials of 228 and 15 mV to reach 10 mA cm for OER and HER, respectively. An industry-scale evaluation using Ru-Ni(OH)/NF as both OER and HER electrodes demonstrates a high current density of 1500 mA cm (OER: 410 mV; HER: 240 mV), surpassing commercial RuO (OER: 600 mV) and Pt/C based performance (HER: 265 mV).
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/adma.202403151 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Development of Receptor-Binding Domain (RBD)-Loaded PEG-PCL Nanoparticle Formulations Against SARS-CoV-2.
Macromol Biosci
September 2025
Department of Pharmaceutical Technology, Faculty of Pharmacy, Ankara University, Tandogan, Ankara, Turkey.
The COVID-19 pandemic caused by the novel coronavirus SARS-CoV-2 has highlighted the critical need for safe and effective vaccines. In this study, subunit nanovaccine formulations were developed using the receptor-binding domain (RBD) of the SARS-CoV-2 spike (S) protein encapsulated in polymeric nanoparticles composed of poly(ethylene glycol)-block-poly(ε-caprolactone) (PEG-PCL). Two surfactants, poly(vinyl alcohol) (PVA) and sodium cholate (SC), were evaluated during formulation via a modified water-in-oil-in-water (w/o/w) emulsion-solvent evaporation method.
View Article and Find Full Text PDFReliable Strategy for the Covalent Bonding of MOFs to SiC Membranes for Ultrastable Noble Metal Capture in Harsh Environments.
ACS Appl Mater Interfaces
September 2025
School of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, 333 Long Teng Road, Shanghai 201620, P.R. China.
Silicon carbide (SiC) membranes combine exceptional chemical, thermal, and mechanical stability but suffer from surface inertness that precludes functionalization. Conversely, MOFs offer unmatched molecular selectivity but are typically powders, severely limiting their practical use. To address this, we develop a generalizable route to fabricate ultrastable MOF@SiC membranes via sequential oxidation and acidification, creating abundant Si-OH sites on SiC surfaces that covalently bond with Zr-MOF crystals; the bonding mechanism between MOFs and substrates has been extensively studied.
View Article and Find Full Text PDFFEA-based optimal design of special suction cups temperature-controlled coatings.
Sci Prog
September 2025
School of Mechanical and Automotive Engineering, Shanghai University of Engineering Science, Shanghai, China.
To address the growing demand for temperature control precision and uniformity in wafer processing, a specialized electrostatic chuck temperature control system based on thermal control coatings is proposed, aiming to enhance thermal management robustness and homogeneity. This study employs a zoned control methodology using metal-oxide conductive coatings on silicon carbide wafer heating plates. A quadrant-based thermal control coating model was established, and finite element analysis was conducted to compare temperature distribution characteristics across three geometric configurations: sectorial, spiral, and zoned designs.
View Article and Find Full Text PDFClinical and Esthetic Outcomes of Anodized Titanium Abutments: A Systematic Review of Randomized Controlled Trials.
Clin Cosmet Investig Dent
August 2025
Department of Periodontology, Faculty of Dentistry, Universitas Padjadjaran, Sumedang, West Java, Indonesia.
Titanium is widely used for dental implant abutments due to its mechanical strength, biocompatibility, and corrosion resistance; however, its gray coloration can compromise esthetic outcomes, particularly in patients with thin or translucent gingival biotypes. Anodization, a surface modification technique altering the titanium oxide layer, has been proposed to improve soft tissue aesthetics by producing abutments with warmer tones (eg, pink or gold) that harmonize with the surrounding gingiva. This systematic review aimed to evaluate the clinical and aesthetic outcomes of anodized titanium abutments compared to non-anodized titanium and other materials, with a focus on peri-implant soft tissue health and visual integration.
View Article and Find Full Text PDFDesign of a scandium-integrated MOF hybrid hydrogel for simultaneous dye adsorption and antibacterial activity.
Front Chem
August 2025
Faculty of Educational Sciences, Al-Ahliyya Amman University, Amman, Jordan.
In this study, a novel hybrid hydrogel incorporating a scandium-based metal-organic framework (scandium-integrated MOF-hydrogel hybrid) was developed using scandium nitrate, 1,4-naphthalenedicarboxylic acid, oxidized pectin, and chitosan. The synthesized scandium-integrated MOF-hydrogel hybrid demonstrated remarkable dual-functionality in both the adsorption of hazardous dye pollutants and the inhibition of pathogenic bacteria commonly found in wastewater. Characterization of the scandium-integrated MOF-hydrogel hybrid was performed using FT-IR, XRD, SEM, EDAX, CHNO elemental, BET, and XPS analyses, confirming successful MOF integration and a porous, reactive surface.
View Article and Find Full Text PDF