98%
921
2 minutes
20
Electronic skin (e-skin) has attracted tremendous interest due to its diverse potential applications, including in physiological signal detection, health monitoring, and artificial throats. However, the major drawbacks of traditional e-skin are the weak adhesion of substrates, incompatibility between sensitivity and stretchability, and its single function. These shortcomings limit the application of e-skin and increase the complexity of its multifunctional integration. Herein, the synergistic network of crosslinked SWCNTs within and between multilayered graphene layers was directly drip coated onto the PU thin film with self-adhesion to fabricate versatile e-skin. The excellent mechanical properties of prepared e-skin arise from the sufficient conductive paths guaranteed by SWCNTs in small and large deformation under various strains. The prepared e-skin exhibits a low detection limit, as small as 0.5% strain, and compatibility between sensitivity and stretchability with a gauge factor (GF) of 964 at a strain of 0-30%, and 2743 at a strain of 30-60%. In physiological signals detection application, the e-skin demonstrates the detection of subtle motions, such as artery pulse and blinking, as well as large body motions, such as knee joint bending, elbow movement, and neck movement. In artificial throat application, the e-skin integrates sound recognition and sound emitting and shows clear and distinct responses between different throat muscle movements and different words for sound signal acquisition and recognition, in conjunction with superior sound emission performance with a sound spectrum response of 71 dB (f = 12.5 kHz). Overall, the presented comprehensive study of novel materials, structures, properties, and mechanisms offers promising potential in physiological signals detection and artificial throat applications.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9823652 | PMC |
http://dx.doi.org/10.3390/nano13010179 | DOI Listing |
J Colloid Interface Sci
August 2025
Hubei Provincial Key Laboratory of Green Materials for Light Industry, Hubei University of Technology, Wuhan 430068, China. Electronic address:
Human-machine interaction (HMI) textile interfaces with safe ingredients for intelligent wearable sensing systems are critical in the era of information and the metaverse. To address the dual limitations of traditional synthetic polymer hydrogels (poor biocompatibility) and pure protein-based materials (limited mechanical performance), this study has redesigned the protein structure for a bovine serum albumin (BSA)-based composite hydrogel fibers system. By leveraging the synergistic interplay of dynamic ionic crosslinking and covalent crosslinking, the hydrogel system achieves enhancements in both mechanical strength and processability.
View Article and Find Full Text PDFJ Colloid Interface Sci
August 2025
School of Textiles and Fashion, Shanghai University of Engineering Science, Shanghai 201620, China. Electronic address:
Electronic skin (e-skin) faces challenges in achieving long-term signal stability and wearability due to the poor breathability, sweat accumulation, and limited sensitivity. This paper reports a multifunctional nanofibrous e-skin (PTZ-PPPB-PPT) fabricated via layer-by-layer electrospinning, integrating a hydrophobic layer (PVDF-TrFE/ZnO), a piezoelectric enhancement layer (PAN/PVP/PDA@BTO), and a thermochromic layer (PAN/PVP/TCM). Benefited from the asymmetric wettability and hierarchical fiber structure, the device enables unidirectional sweat transport (contact angle reduces from 132.
View Article and Find Full Text PDFACS Appl Mater Interfaces
August 2025
National Engineering Research Center for Colloidal Materials, School of Chemistry and Chemical Engineering, Shandong University, Jinan, Shandong 250100, China.
Flexible piezoresistive pressure sensors are crucial for next-generation wearable electronics, yet achieving simultaneous high sensitivity, durability, and mechanical robustness remains a challenge. Herein, we report a high-performance piezoresistive sensor fabricated through the integration of two-dimensional MXene nanosheets with a hierarchically structured modified polyamide 6 nanofiber net (D-PA6 NFN) using scalable vacuum filtration. Benefiting from the synergistic combination of MXene's excellent electrical properties, web-like architecture, the composite nanofiber tensile strength (52 MPa), and flexibility (40%), the resulting sensor exhibited good sensitivity (0.
View Article and Find Full Text PDFNanoscale Horiz
August 2025
Department of Semiconductor Engineering, Gachon University, Seongnam 13120, Republic of Korea.
Advancements in artificial intelligence have broadened the capabilities of robots, particularly in caregiving applications that are essential for aging societies facing a growing shortage of human caregivers. Humanoid caregiving robots require sophisticated sensing systems to perform delicate tasks such as monitoring vital signs and providing physical assistance without causing discomfort. In particular, functionalities such as close-range proximity sensing, tactile feedback, and physiological and electrophysiological signal monitoring are essential for ensuring safe and effective caregiving.
View Article and Find Full Text PDFCurr Drug Saf
August 2025
PSIT-Pranveer Singh Institute of Technology (Pharmacy), Bhauti Kanpur, Uttar Pradesh, India.
A transdermal drug delivery system is a convenient drug delivery system where the drug enters the systemic circulation through the protective barrier, i.e., skin.
View Article and Find Full Text PDF