98%
921
2 minutes
20
Surface wetting phenomena impact chemistry, physics, biology, and engineering. The wetting behaviors of partially miscible binary liquid systems are especially complex. Here, we report evidence of universal behavior in the divergence of wetting layer growth at liquid-vapor interfaces of the cyclohexane + aniline, hexane + o-toluidine, and methanol + carbon disulfide systems. Layer growth on the micron scale was followed using visible light scattering from stirred samples. The layer thicknesses were found to diverge with decreasing temperature when coexistence was approached from the one-phase region, but only for solutions richer in the higher density/higher surface tension component. The onset of divergence was <1 K above the bulk coexistence temperature; nearer the critical composition, the onset temperature was the critical temperature itself. All three systems showed identical divergent wetting properties after variable normalization. In contrast, no divergent wetting layer formation was seen in the benzene + 1,2-propanediol or water + phenol systems. The mathematical sign of the Hamaker constant correlates with the contrasting behaviors. Collectively, these results have implications for theoretical descriptions of adsorption layer growth and crossover behavior, for measurements of complete wetting temperatures, and for practical applications.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1063/5.0105690 | DOI Listing |
Int J Biol Macromol
September 2025
Jiangsu Provincial Key Lab for The Chemistry and Utilization of Agro-forest Biomass, Jiangsu Key Lab of Biomass Based Green Fuels and Chemicals, College of Chemical Engineering, Nanjing Forestry University, Nanjing, 210037, China.
Aramid films are potential separator candidates for high-safety lithium-ion batteries (LIBs) due to their inherent flame retardancy and outstanding thermal stability. However, both weak liquid electrolyte wettability and poor mechanical properties of aramid separators for lithium-ion batteries result in low ionic conductivity and unsatisfactory electrochemical performance for LIBs. Herein, a novel asymmetric porous composite separator composed of a relatively dense nanocellulose (CNC) layer and a porous poly(m-phenylene isophthalamide) (PMIA) supporting layer has been fabricated by using a water-induced phase conversion process.
View Article and Find Full Text PDFCarbohydr Polym
November 2025
College of Safety and Environmental Engineering, Shandong University of Science and Technology, Qingdao 266590, China; State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technol
Aiming at the problems such as large dust in each production process of open-pit mines, insufficient water resistance of the curing layer of dust control materials, and poor mechanical strength, this research applied the network generated by Schiff base reaction between oxidized starch (OS) and gelatin (GEL) as the basis, and combined with polyvinyl alcohol (PVA) and calcium chloride (CaCl). This material improves the problem of poor dust suppression effect caused by the environment of open-pit coal mines. It was found that the large number of amino groups contained in GEL attack the carbon atoms in the carbonyl group of OS to form carbon-nitrogen double bonds, generating Schiff bases as the crosslinking network, which enhanced the water resistance of the polymers.
View Article and Find Full Text PDFLangmuir
September 2025
Northeast Petroleum University, Daqing 163318, China.
CO flooding holds significant potential for the EOR in high-wax reservoirs. Wax crystals precipitated from high-wax oil adhere to pore channels, reducing productivity. The mechanisms of wettability reversal driven by wax/CO interactions and CO-induced stripping of wax deposits are critical.
View Article and Find Full Text PDFLangmuir
September 2025
State Key Laboratory for Inorganic Synthesis and Preparative Chemistry, College of Chemistry, Jilin University, Changchun 130012, P. R. China.
In this work, we successfully transformed poly(vinyl alcohol) (PVA) thin films into all-purpose, self-cleaning coatings with unprecedented mechanical durability by using dimethyl sulfoxide (DMSO) as a casting or wetting solvent, followed by high-temperature curing. These coatings effectively cleanse themselves not only of liquid oil and solidified wax upon simple water action but also of ice with gentle airflow within several seconds, even after 100 cycles of destructive surface scratching. Surface-specific spectroscopic analysis revealed that, owing to DMSO acting as a hydrogen-bond-accepting capping agent, nearly all of the OH groups in the PVA coatings─both in the bulk phase and on the surfaces─were effectively prevented from forming hydrogen bonds and, simultaneously, thermodynamically driven to orient outward, minimizing surface energy in air.
View Article and Find Full Text PDFACS Macro Lett
September 2025
School of Advanced Materials, Peking University Shenzhen Graduate School, Shenzhen 518055, P. R. China.
Achieving both high efficiency and operational stability in solution-processed organic light-emitting diodes (OLEDs) remains a significant challenge due to charge imbalance and the limited structural robustness of polymeric hole transport layers (HTLs). Herein, we report a sterically engineered polymer HTM, TFPHS, designed by incorporating a bulky 1-methyl-4-phenylnaphthalene side group into a TFB-derived conjugated backbone. This structural modification enhances backbone rigidity, suppresses dihedral torsion, and enables balanced hole and electron transport.
View Article and Find Full Text PDF