Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

We propose and numerically demonstrate an 800 Gbps silicon photonic transmitter with sub-decibel surface-normal optical interfaces. The silicon photonic transmitter is composed of eight silicon Mach-Zehnder optical modulators and an interleaved AMMI WDM device. This WDM device comprises two 1 × 4 angled MMI and a Mach-Zehnder interferometer (MZI) optical interleaver with an apodized bidirectional grating which has about -0.5 dB coupling loss. Both the Mach-Zehnder electro-optical modulators and MZI optical interleaver regard the bidirectional grating coupler as vertical optical coupler and 3-dB power splitter/combiner. By importing the S-parameter matrices of all the components which have been carefully designed in simulation software, the circuit-level model of the optical transmitter can be built up. On this basis, the static and dynamic performance characterization were carried out numerically. For NRZ modulation, the optical transmitter exhibits the overall optical loss of 4.86-6.72 dB for eight wavelength channels. For PAM4 modulation, the optical loss is about 0.5 dB larger than that of NRZ modulation, which varies between 5.38-7.27 dB. From the eye diagram test results, the WDM silicon photonic transmitter can achieve single channel data transmission at 100 Gb/s NRZ data or 50 GBaud/s PAM4 symbol rate with acceptable bit error rate.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8880022PMC
http://dx.doi.org/10.3390/mi13020251DOI Listing

Publication Analysis

Top Keywords

silicon photonic
16
photonic transmitter
16
optical
10
800 gbps
8
wdm silicon
8
transmitter sub-decibel
8
sub-decibel surface-normal
8
surface-normal optical
8
optical interfaces
8
wdm device
8

Similar Publications

Enhanced Bendability and Viscoelastic behavior in High-quality 2H-SiC@SiO2 Nanowires.

Nanotechnology

September 2025

State Key Laboratory of Optoelectronic Materials and Technologies School of Chemistry and Chemical Engineering, Sun Yat-Sen University, No 135, XinGangXi Road, Guangzhou 510275, guangzhou, 510275, CHINA.

Silicon carbide nanowires (SiC NWs) combine the benefits of bulk SiC materials with the properties of low-dimensional nanomaterials. They are known for their excellent mechanical strength and durability, which are critical for their potential applications in high-stress environments and micro-nano functional systems. Here, the mechanical properties and deformation mechanisms of 2H-SiC NWs with rare defects in the [0001] orientation are reported.

View Article and Find Full Text PDF

Scanning probe microscopy (SPM) is a powerful technique for mapping nanoscale surface properties through tip-sample interactions. Thermal scanning-probe lithography (tSPL) is an advanced SPM variant that uses a silicon tip on a heated cantilever to sculpt and measure the topography of polymer films with nanometer precision. The surfaces produced by tSPL-smooth topographic landscapes-allow mathematically defined contours to be fabricated on the nanoscale, enabling sophisticated functionalities for photonic, electronic, chemical and biological technologies.

View Article and Find Full Text PDF

On-chip near-infrared gas sensing based on slow light mode multiplexing in photonic crystal waveguides.

Lab Chip

September 2025

State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, Changchun 130012, China.

Photonic crystal slow light waveguides present a breakthrough in the manipulation of optical signals and enhancing the interaction between light and matter. In particular, two-dimensional (2D) photonic crystal waveguides (PCWs) on silicon photonic chips hold promise in improving the sensitivity of on-chip gas sensors. However, the development of the gas sensors based on 2D PCWs suffers from a high propagation loss and a narrow slow light bandwidth.

View Article and Find Full Text PDF

Composite nano copper carrier combining cuproptosis and photodynamic therapy for spatiotemporal synergistic anti-tumor therapy.

Biomater Sci

September 2025

Britton Chance Center for Biomedical Photonics at Wuhan National Laboratory for Optoelectronics Hubei Bioinformatics & Molecular Imaging Key Laboratory, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, Hubei,

Cuproptosis is a copper-dependent programmed cell death triggered by mitochondrial dysfunction, which offers significant anti-tumor potential but requires tumor-specific copper delivery to avoid systemic toxicity. Here, we developed a synergistic nanoplatform (CuO@SiO-Ce6, CSC) integrating cuproptosis induction with photodynamic therapy (PDT). A cuprous oxide (CuO) core was encapsulated in silicon dioxide and covalently linked to the photosensitizer Ce6.

View Article and Find Full Text PDF

Background: Photon-counting computed tomography (CT) bears promise to substantially improve spectral and spatial resolution. One reason for the relatively slow evolution of photon-counting detectors in CT-the technology has been used in nuclear medicine and planar radiology for decades-is pulse pileup, that is, the random staggering of pulses, resulting in count loss and spectral distortion, which in turn cause image bias and reduced contrast-to-noise ratio (CNR). The deterministic effects of pileup can be mitigated with a pileup-correction algorithm, but the loss of CNR cannot be recovered, and must be minimized by hardware design.

View Article and Find Full Text PDF