98%
921
2 minutes
20
Conventional microalgal drying consumes huge time and contributes to 60-80% of downstream process costs. With the aim to develop an effective and rapid drying process, the present study evaluated the performance of microwave based drying (MWD) with a power range of 360-900 W and compared with the conventional oven drying (OD) at 40-100 °C. MWD was found to be efficient due to uniform and volumetric heating because of dipolar interaction, with an effective diffusivity of 0.47 × 10-1.63 × 10 m s, comparatively higher than OD. Activation and specific energy of 32.43 W g and 42.9-56.07 kWh kg was projected respectively, and a falling rate period with best fit for Newton and Henderson-Pabis model was observed for MWD. Uniform heating from internal sub-surface avoided cell distress, resulting in 14.4% higher lipid yield and significant preservation of biochemical components that can be processed into bioenergy and valuable products in microalgal biorefinery.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.biortech.2021.125721 | DOI Listing |
Physiol Rep
September 2025
Department of Physiology, Nutrition and Biomechanics, Swedish School of Sport and Health Sciences, Stockholm, Sweden.
Human skeletal muscle comprises slow-twitch (type I) and fast-twitch (type II) fibers. Fiber type-specific analyses often require manual isolation of fibers, necessitating effective tissue preservation. While freeze-drying remains the standard, alternative preservation methods such as RNAlater and RNAlater-ICE are increasingly used.
View Article and Find Full Text PDFInt J Biol Macromol
September 2025
Laboratory of Marine Chemical Resource Development, Faculty of Fisheries Sciences, Hokkaido University, Hakodate, Hokkaido, 041-8611, Japan.
The properties of gelatin derived from fish processing by-products, such as Atlantic salmon (Salmo salar) skin, are strongly influenced by the drying method used during production. This study investigated the impacts of four drying methods on the extraction yield, physicochemical attributes, and gel characteristics of gelatin: freeze-dried gelatin (FDG), spray-dried gelatin (SDG), vacuum-dried gelatin (VDG), and hot air-dried gelatin (HDG) extracted from Atlantic salmon (Salmo salar) skin. The yields of FDG, VDG, and HDG were similar (15.
View Article and Find Full Text PDFInt J Biol Macromol
September 2025
School of Materials Science and Engineering, Zhejiang Sci-Tech University, Hangzhou, 310018, China. Electronic address:
Efficient water-absorbing and water-holding materials have shown notable promise in various applications, including hygiene products, agriculture, and drug delivery systems. Opposed to traditional absorbents prepared using synthetic polymers, bio-based, environmentally friendly efficient absorbents have attracted more attention from both academia and the industry. Herein, the aerogel absorbents from functional sodium carboxymethyl cellulose (CMCNa), citric acid (CA) crosslinker, and cellulose nanofibers (CNF) have been developed via freeze-drying and cross-linking process.
View Article and Find Full Text PDFFood Chem
September 2025
Division of Food Science and Technology, SKUAST-Kashmir, Shalimar 190025, India.
The Indo-Himalayan region (IHR) is a biodiversity hotspot, home to numerous endangered medicinal plants, including Saussurea costus, a critically endangered species known for its therapeutic properties. This study aimed to standardize the extraction of bioactive compounds from S. costus roots using supercritical fluid extraction and stabilize the extracts through freeze-drying.
View Article and Find Full Text PDFWaste Manag
September 2025
School of Environmental Science and Engineering, Tianjin University, Tianjin 300350, PR China.
This study investigated the pyrolysis of mixed medical waste (MMW) in an indirectly heated rotary kiln, focusing on the effects of operating parameters (filling ratio, heat source temperature, and rotation speed) on the heat transfer performance and product distribution. The pyrolysis behaviors of individual components (cotton swabs, paper, bandages, and plastics) and their composite mixtures were characterized using thermogravimetric-differential thermal analysis (TG-DTA). The heat transfer characteristics, chemical reaction properties, kiln operating parameters, and interactions between the processes were also investigated.
View Article and Find Full Text PDF