Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
In this work, the novel β-cyclodextrin modified mesostructured silica coated multi-walled carbon nanotubes (MWCNTs) composites were synthesized and applied for the removal of parabens in aqueous solution. The prepared MWCNTs/SiO/β-CD composites were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy and thermogravimetric analysis. The effects of the amount of adsorbent, pH and elution solvents on the removal efficiency of parabens from water solutions were investigated. Under the optimized conditions, over 95% removal efficiency was achieved by using 40 mg of MWCNTs/SiO/β-CD adsorbents to absorb the parabens from 60 mL of 0.5 μg/mL parabens solutions. The solution pH in the range from 5 to 9 has no influence on the removal efficiency and the parabens sorption capacity of the prepared adsorbents were around 0.75 μg/mg. Furthermore, the stability and reusability studies demonstrated that the prepared MWCNTs/SiO/β-CD composites are cost-effective adsorbents for the removal of parabens from water with high regeneration efficiency. The composites fabricated in this study could become an attractive candidate for water purification.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.2166/wst.2018.257 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Rapid Removal of Azo Cationic Dyes Using a Cu(II) Hydrogen-Π-Bonded Organic Framework and Its Derived Oxide: A Combined Adsorption and Photocatalysis Study.
Langmuir
September 2025
Laboratory of Electrochemistry-Corrosion, Metallurgy and Inorganic Chemistry, Faculty of Chemistry, USTHB, BP 32, 16111, Algiers, Algeria.
Azo dyes, prevalent in various industries, including textile dyeing, food, and cosmetics, pose significant environmental and health risks due to their chemical stability and toxicity. This study introduces the synthesis and application of a copper hydrogen-π-bonded benzoate framework (Cu-HBF) and its derived marigold flower-like copper oxide (MFL-CuO) in a synergetic adsorption-photocatalytic process for efficiently removing cationic azo dyes from water, specifically crystal violet (CV), methylene blue (MB), and rhodamine B (RhB). The Cu-HBF, previously available only in single crystal form, is prepared here as a crystalline powder for the first time, using a low-cost and facile procedure, allowing its application as an adsorbent and also serving as a precursor for synthesizing well-structured copper oxide (MFL-CuO).
View Article and Find Full Text PDFNitrogen removal efficiency and pathways of the simultaneous nitrification and denitrification process under ultra-low oxygen conditions.
Environ Technol
September 2025
School of Environmental Science and Engineering, Southwest Jiaotong University, Chengdu, People's Republic of China.
To explore strategies for further reducing aeration energy consumption in the simultaneous nitrification and denitrification (SND) process, an SND reactor was constructed to treat low carbon-to-nitrogen (C/N) ratio domestic wastewater under ultra-low dissolved oxygen (DO) conditions (DO < 0.05 mg·L⁻). The effects of hydraulic retention time (HRT) and C/N ratio on nitrogen removal performance were systematically evaluated, and batch experiments were conducted to determine nitrification and denitrification rates.
View Article and Find Full Text PDFTowards Real Zero-Shot Camouflaged Object Segmentation without Camouflaged Annotations.
IEEE Trans Pattern Anal Mach Intell
September 2025
Camouflaged Object Segmentation (COS) faces significant challenges due to the scarcity of annotated data, where meticulous pixel-level annotation is both labor-intensive and costly, primarily due to the intricate object-background boundaries. Addressing the core question, "Can COS be effectively achieved in a zero-shot manner without manual annotations for any camouflaged object?", we propose an affirmative solution. We analyze the learned attention patterns for camouflaged objects and introduce a robust zero-shot COS framework.
View Article and Find Full Text PDFAdsorptive behavior of multi-walled carbon nanotubes functionalized with iron nanoparticles for bisphenol A removal.
Environ Sci Pollut Res Int
September 2025
School of Chemical Engineering, State University of Campinas-Universidade Estadual de Campinas, Albert Einstein Av., 500, Campinas, SP, 13083-852, Brazil.
Bisphenol A (BPA) is a persistent organic pollutant with toxic effects on human health and ecosystems. In this study, the performance of MWCNT-OH functionalized with iron nanoparticles (MWCNT-OH@Fe) using sugarcane bagasse extract as a reducing agent (green synthesis) was evaluated for BPA adsorption. The kinetics are fast, between 10 and 20 min in the range of concentrations evaluated and the resistance to external film diffusion (external film mass transfer) identified as the rate-limiting step of the process.
View Article and Find Full Text PDFA target responsive benzimidazole-based self-assembled micellar system embedded smart hydrogel: an integrated approach for quantification and removal of phenylbutazone.
J Mater Chem B
September 2025
Department of Chemistry, Indian Institute of Technology Ropar, Rupnagar, Punjab 140001, India.
The unregulated use and improper disposal of active pharmaceutical ingredients (APIs), particularly phenylbutazone (PBZ), are contaminating water resources and posing serious risks to the food chain. PBZ is a nonsteroidal anti-inflammatory drug (NSAID) commonly used for treating pain and fever in animals, and its persistence in the environment due to inadequate waste management has become a cause of concern. To address this, we report the fabrication of benzimidazole-based self-assembled nanomicelles (R2 NMs) for selective detection and removal of PBZ.
View Article and Find Full Text PDF