Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Novel ternary nanohybrids, consisting of tetraethylenepentamine (TEPA), graphene oxide (GO) and manganese ferrite magnetic nanoparticles (TEPA-GO/MnFeO), were prepared by a facile hydrothermal method and utilized to remove Pb(II) from aqueous solution effectively. The adsorbents were characterized by SEM, TEM, XRD, FTIR, zeta potential analysis, magnetization hysteresis loop, BET and XPS. These nanoparticles exhibited superparamagnetic behavior as well as high removal efficiency for Pb(II). Moreover, numerous amino groups of the functionalized pendant TEPA on GO coupled with the porous structure of TEPA-GO/MnFeO contribute to high Pb(II) adsorption capacity. The maximum Pb(II) adsorption capacity of TEPA-GO/MnFeO was determined to be 263.2 mg/g at the optimized solution pH of 5.5, much higher than that of GO/MnFeO (133.3 mg/g) and GO (196.1 mg/g). The kinetics and isotherm data fitted well with the pseudo-second-order kinetics and the Langmuir isotherm model, respectively. Thermodynamic studies revealed that the Pb(II) adsorption of TEPA-GO/MnFeO was a endothermic and spontaneous process. The experimental results corroborated that TEPA-GO/MnFeO can be efficaciously reused after washed with HCl, indicative of its potential applications in environmental cleanup.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jhazmat.2018.06.071DOI Listing

Publication Analysis

Top Keywords

pbii adsorption
12
novel ternary
8
ternary nanohybrids
8
graphene oxide
8
magnetic nanoparticles
8
adsorption capacity
8
pbii
6
tepa-go/mnfeo
5
nanohybrids tetraethylenepentamine
4
tetraethylenepentamine graphene
4

Similar Publications

Ball-milled biochar-vermiculite/zeolite magnetic composites for adsorption of lead and p-nitrophenol from wastewater: Synthesis, performance, and mechanisms.

Environ Res

September 2025

School of Resources and Environment, Northeast Agricultural University, Harbin, 150030, China; School of Ecology and Environment, Hainan University, Haikou 570228, China. Electronic address:

Herein, ball-milled magnetic biochar-vermiculite composite (MBC@VT) and ball-milled magnetic biochar-zeolite composite (MBC@ZT) were synthesized via one-step ball-milling, and their adsorption capacities for Pb(II)/P-nitrophenol (PNP) in water were compared. The results demonstrated that the removal of Pb(II) and PNP through both materials was a complex, endothermic reaction mainly driven by chemisorption, with strong tolerance to pH changes and co-existing ions. MBC@VT showed superior adsorption for Pb(II) (reaching 367.

View Article and Find Full Text PDF

Remediation of heavy metal pollution is essential for safeguarding ecological integrity and public health. The present work aimed to prepare a novel biochar from leaves (EC-biochar) for the effective removal of Cd and Pb cations, as representative heavy metals, from aqueous solutions. The adsorption performance of Cd and Pb cations by EC-biochar was assessed by varying different operating parameters ( pH, temperature, EC-biochar dose, adsorption time, and adsorbate concentration).

View Article and Find Full Text PDF

This study assessed the health risks of heavy metal contamination in groundwater in Siwa Oasis, Egypt's northwestern desert, and their potential decontamination using a marble-based nanoporous Ca-MCM-41 structure as an adsorbent. Fe, Cd, Cr, Pb, and Mn contents exceeded World Health Organization (WHO) guidelines with potential non-carcinogenic risks and carcinogenic risks based on the hazard index (HI) and Monte Carlo simulations. Ca-MCM-41 showed significant performances in the removal of most of these toxic ions with batch saturation uptake capacities of 239 mg/g Cd(II), 252 mg/g Fe(II), 308 mg/g Pb(II), 132 mg/g Cr(VI), and 154.

View Article and Find Full Text PDF

The present study focuses on the synthesis of coconut shell-derived biochar (BC), molybdenum disulfide (MoS), and poly(acrylic acid) (PAA) (BC/MoS/PAA) composite. The composite was synthesized a simple hydrothermal method. The structural and morphological features of the resulting composite were thoroughly characterized using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), Brunauer-Emmett-Teller (BET) surface analysis, and Raman spectroscopy.

View Article and Find Full Text PDF

This study investigates the potential of valorized wood bark waste as an efficient, low-cost adsorbent for removing Pb(II) ions from aqueous solutions. Valorization via pyrolysis significantly enhanced the surface area (from 105.3 to 344.

View Article and Find Full Text PDF