Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Electrochemical Atomic Layer Deposition (E-ALD) technique has demonstrated to be a suitable process for growing compound semiconductors, by alternating the under-potential deposition (UPD) of the metallic element with the UPD of the non-metallic element. The cycle can be repeated several times to build up films with sub-micrometric thickness. We show that it is possible to grow, by E-ALD, CuS ultra-thin films on Ag(111) with high structural quality. They show a well ordered layered crystal structure made on alternating pseudohexagonal layers in lower coordination. As reported in literature for minerals in the Cu-S compositional field, these are based on CuS triangular groups, with layers occupied by highly mobile Cu ions. This structural model is closely related to the one of the low chalcocite. The domain size of such films is more than 1000 Å in lateral size and extends with a high crystallinity in the vertical growth direction up to more than 10 nm. E-ALD process results in the growth of highly ordered and almost unstrained ultra-thin films. This growth can lead to the design of semiconductors with optimal transport proprieties by an appropriate doping of the intra metallic layer. The present study enables E-ALD as an efficient synthetic route for the growth of semiconducting heterostructures with tailored properties.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5431668PMC
http://dx.doi.org/10.1038/s41598-017-01717-0DOI Listing

Publication Analysis

Top Keywords

ultra-thin films
12
cus ultra-thin
8
growth
5
films
5
operando sxrd
4
sxrd study
4
study structure
4
structure growth
4
growth process
4
process cus
4

Similar Publications

Room-Temperature Ferroelectricity in Ultra-Thin p-Type BiCuSeO Films.

Adv Mater

September 2025

Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China.

Atomically thin 2D layered ferroelectric semiconductors, where polarization switching transpires within the channel material itself, are pivotal to advancing the next generation of high-performance electronics. Nevertheless, the challenge remains in either the controllable synthesis of films or the manipulation of associated ferroelectricity. Here, 2D p-type BiCuSeO (BCSO) films with a thickness down to ≈3 nm are successfully synthesized using molecular beam epitaxy.

View Article and Find Full Text PDF

Observation of thickness dependent anomalous spin filtration in MoS2 ultra-thin films.

J Chem Phys

August 2025

Department of Applied Physics and Materials Engineering, National Institute of Technology, Patna 800005, India.

This study exposes novel spin filtering phenomena in ultra-thin MoS2 films deposited on indium tin oxide (ITO) substrates. The novelty lies in the explicit dependence of spin polarization and filtering efficiency on the film thickness. MoS2, a transition metal dichalcogenide, exhibits promising spintronic properties due to its intrinsic spin-orbit coupling and the potential to control spin orientation.

View Article and Find Full Text PDF

This research investigates the deposition, characterization of SiC ultra-thin films deposited by nanosecond pulsed Nd3 ⁺ laser deposition technique and laser assisted doping. These SiC films possess better qualities in terms of surface roughness varying from 2-5 nm. Using an atom probe tomography (APT) and a transmission electron microscope (TEM), key elemental maps showed desirable concentrations of Si of ~50 at.

View Article and Find Full Text PDF

Ultimate-vertical-gate-all-around (UVGAA) MOSFET represent an advanced evolution of VGAA architectures, featuring source-drain symmetry enabled by simultaneous formation of both terminals. Derived from the fabrication methods of three dimensional (3D) NAND flash memory, UVGAA MOSFET offer potential for vertically stacked logic circuits. However, their implementation demands ultra-thin sacrificial SiNlayers and higher lateral-high-aspect-ratio (LHAR) trench structures compared to 3D NAND flash memory.

View Article and Find Full Text PDF

High-throughput characterisation and fast sample quality feedback loops are essential for accelerating the development of advanced materials and their technological applications. This is particularly pertinent to the chemical vapor deposition (CVD) driven industrialisation of ultra-thin device materials, like hBN, where a complex texture at the atomic layer level remains hard to characterise efficiently, particularly over large areas. Here, we show that secondary electron contrast can be used to fingerprint the alignment of monolayer hBN domains with the Ni(111) surface, thus opening fast crystallographic texture mapping capabilities with conventional scanning electron microscopy (SEM).

View Article and Find Full Text PDF