Quinoliporphyrin as an Aromatic Monoanionic Porphyrinoid and Its Degradation Promoted by Cu.

This study presents the first synthesis and characterization of quinoliporphyrin (), a unique aromatic monoanionic macrocycle featuring a quinoline unit within the porphyrinoid core. Previously, quinoline-containing porphyrins had their quinoline units positioned at peripheral locations. This structural feature exhibits exclusive reactivity with Cu, leading to rapid degradation at μM concentrations within 30 min at room temperature and the formation of a fluorogenic product ().

Comparative Arthroscopic Rotator Cuff Repair Outcomes Associated with Continuous Interscalene Block vs. Bolus Interscalene Block with Intravenous Dexmedetomidine: A Retrospective Cohort Study.

This retrospective cohort study compared the outcomes (postoperative pain, morphine consumption, sleep disturbance, and function) of patients undergoing arthroscopic rotator cuff repair involving either continuous interscalene block (CISB group) or single-injection interscalene block with intravenous dexmedetomidine (SISB group) analgesia. : This study included 61 patients, aged 59-71 years, who underwent elective arthroscopic rotator cuff repair and for whom complete electronic health records were available. Patients in the SISB group received a single-injection nerve block plus intraoperative intravenous dexmedetomidine and postoperative patient-controlled analgesia (PCA; morphine and dexmedetomidine; = 33).

Electronic Melting of Silicon in Nanostructures using X-ray Forbidden Bragg Reflections.

We carried out a short beamtime at the Pohang Accelerator Laboratory x-ray Free Electron Laser to perform a pump-probe (PP) laser excitation diffraction experiment on the silicon (222) forbidden Bragg peak. To limit the x-ray penetration, we used a "device layer" silicon film wafer bonded to a silicon substrate. The sample, specially fabricated by MEMC Electronic Materials, had a Si(100) substrate bonded to a 170 nm Si(100) film rotated at 45° for crystallographic isolation.

Fabrication of a Spiral Microfluidic Chip for the Mass Production of Lipid Nanoparticles Using Laser Engraving.

A spiral microfluidic chip (SMC) and multi-spiral microfluidic chip (MSMC) for lipid nanoparticle (LNP) production were fabricated using a CO laser engraving method, using perfluoropolyether (PFPE) and poly(ethylene glycol) diacrylate as photopolymerizable base materials. The SMC includes a spiral microchannel that enables rapid fluid mixing, thereby facilitating the production of small and uniform LNPs with a size of 72.82 ± 24.

Enhancing resolution with the extended image restoration method: strain field energy and correlation length analysis in Bragg coherent X-ray diffraction imaging.

Understanding atomic-level imperfections is crucial in various technological applications. Bragg coherent X-ray diffraction imaging (BCDI) enables non-destructive, three-dimensional imaging of those materials under in situ and operando conditions but has limited spatial resolution. This limitation hinders accurate calculations of physical quantities, e.

Comparable clinical outcome with greater thickness and lesser re-tear rate following allogenous dermal scaffold augmentation for large to massive rotator cuff tears: a retrospective case-controlled study.

Background: Allogenous dermal scaffold augmentation enhances partial rotator cuff repairs by providing structural support and a biologic scaffold that promotes tissue regeneration, reduces mechanical strain, and compensates for poor tendon quality in large to massive rotator cuff tears. This approach helps lower the risk of retear and improves functional recovery.

Methods: This study included 55 patients with large to massive rotator cuff tears, divided into two groups.

Production of Uniform Droplets and Lipid Nanoparticles Using Perfluoropolyether-Based Microfluidic Devices.

Microfluidic devices are greatly affected by the materials used. The materials used in previous studies had problems in various aspects, such as processing, adsorption, and price. This study will investigate the materials needed to overcome such problems.

Nonmelting Disordering Facilitated by Electron Delocalization.

Disordering atomic structures offers a functionality hardly expected in ordered states, including phase-change memory and photonic computing, offering the potential to renovate von Neumann architecture for neuromorphic engineering with low latency. However, significant energy consumption during the disordering compromises the data reliability and integration efficiency, which is traditionally regarded to take place after melting. Here, we investigate time for disordering in isochronal and isochoric manners, challenging the conventional melt-quenching theory.

Intuitive and Minimally Invasive Surgical Technique for Comminuted Mid-Shaft Clavicle Fractures: Fixation with an Anterior Mini Plate and Superior Locking Compression Plate.

: We have applied an anterior locking compression mini plate in addition to a conventional superior locking compression plate for the treatment of wedge or multifragmentary clavicular fractures. : Medical and radiologic data were retrospectively reviewed for patients who underwent surgical fixation with an anterior locking compression mini plate and conventional anatomical locking compression plate in a clavicle fracture of AO/OTA 15.2 B and 15.

Clinical and Radiologic Outcomes of Augmented Partial Repair with Acellular Dermal Allograft and Superior Capsular Reconstruction in Massive Rotator Cuff Tears: 2-Year Follow-Up.

To evaluate the clinical and radiologic outcomes of arthroscopic augmented partial repair (APR) with acellular dermal matrix versus arthroscopic superior capsular reconstruction (SCR) in massive rotator cuff tears. The study included a total of 49 patients with massive rotator cuff tears who underwent arthroscopic APR (26 patients) and SCR (23 patients) between March 2018 and June 2021. Clinical scores, visual analog scores, and range of motion were collected preoperatively and postoperatively until the last follow-up.

Multi-objective optimization of dynamic VO metagrating: broadband polarization-independent transmission modulator.

In this paper, a novel thermo-optic metagrating based on phase-change material (vanadium dioxide, VO) is proposed for broadband, polarization-independent, and non-dispersive transmission modulation at the telecommunication wavelengths. In the pursuit of concurrent attainment of multiple performance objectives, nanostructured VO metagratings are optimized numerically using inverse design algorithms. Notably, adjoint optimization pertaining to both phases of VO facilitates better modulation capabilities within free-form shaped VO metagratings compared to shape-optimized methods with predetermined designs.

Will Mobile-Bearing Total Knee Arthroplasty Be Lost to History? A Comparative Study of Long-Term Follow-Up.

Mobile-bearing (MB) total knee arthroplasty (TKA) implants were introduced as an alternative to fixed-bearing (FB) implants because of their theoretical advantages related to femorotibial rotational mismatch. The purpose of this study is to compare the clinical and radiologic outcomes of MB and FB TKA after approximately 13 years of follow-up. We compared the results of 88 patients with a mean age of 66 years who had received a rotating platform MB implant or a FB implant.

Copper-Catalyzed Diamination of Alkenes using -Benzoylhydroxylamines to Access the Four Azaindoline Families.

A mild and efficient method for the copper-catalyzed diamination of alkenes is described. In this reaction, -benzoylhydroxylamine serves as an electrophilic nitrogen source for the regioselective formation of C-N bonds. This transformation provides a novel strategy for synthesizing all four isomeric 2,3-disubstituted azaindoline families and offers a wide substrate scope.

Fabrication of Perfluoropolyether Microfluidic Devices Using Laser Engraving for Uniform Droplet Production.

A perfluoropolyether (PFPE)-based microfluidic device with cross-junction microchannels was fabricated with the purpose of producing uniform droplets. The microchannels were developed using CO laser engraving. PFPE was chosen as the main material because of its excellent solvent resistance.

Risk Factors for Major Lower Limb Amputation and Effect of Endovascular Revascularization in Patients with Diabetic Foot Wound.

Objective: Major lower extremity amputation (LEA) such as below-knee or above-knee amputations can result in more physical disabilities and poorer socioeconomic functions than minor LEAs in diabetic foot ulcer (DFU). Therefore, identification of risk factors for major LEA and investigation of effectiveness of endovascular revascularization are critical for prevention and better prognosis of DFU patients.

Methods: From January 2014 to December 2017, a total of 125 patients with DFU treated with any level of amputation were included in this study.

Which is better? Early versus delayed rehabilitation after arthroscopic rotator cuff repair.

Purpose: This study aimed to compare the 5-year clinical and functional outcomes, including repaired tendon healing status, between early and delayed rehabilitation after arthroscopic rotator cuff repair METHODS: A total of 75 patients with rotator cuff tears (less than 5 cm) underwent arthroscopic repairs over a 60-month period. Participants were randomly assigned to early and delayed postoperative rehabilitation groups with distinct protocols. Clinical and functional outcome measures included Constant score, University of California at Los Angeles (UCLA) score, visual analogue scale for pain and isokinetic dynamometer test for muscle strength recovery.

Effects of Electron-Withdrawing and Electron-Donating Groups on Aromaticity in Cyclic Conjugated Polyenes.

Determining the aromaticity of various fluorinated benzenes is challenging as easily obtained experimental aromaticity [Δδ( - )] necessitates the chemical shifts of inner and outer protons. This issue was addressed in porphyrinoids by replacing the electron-withdrawing (E.W.

Design, synthesis of new 3H-imidazo[4,5-b]pyridine derivatives and evaluation of their inhibitory properties as mixed lineage kinase 3 inhibitors.

Mixed-lineage protein kinase 3 (MLK3) is implicated in several human cancers and neurodegenerative diseases. A series of 3H-imidazo[4,5-b]pyridine derivatives were designed, synthesized and evaluated as novel MLK3 inhibitors. A homology model of MLK3 was developed and all designed compounds were docked to assess their binding pattern and affinity toward the MLK3 active site.

Improved prediction of clinical pregnancy using artificial intelligence with enhanced inner cell mass and trophectoderm images.

This study aimed to assess the performance of an artificial intelligence (AI) model for predicting clinical pregnancy using enhanced inner cell mass (ICM) and trophectoderm (TE) images. In this retrospective study, we included static images of 2555 day-5-blastocysts from seven in vitro fertilization centers in South Korea. The main outcome of the study was the predictive capability of the model to detect clinical pregnancies (gestational sac).

Octyl gallate has potent anti-inflammasome activity by directly binding to NLRP3 LRR domain.

The NOD-, LRR-, and Pyrin domain-containing protein 3 (NLRP3) inflammasome plays key roles in regulating inflammation. Numerous studies show that the abnormal activation of NLRP3 associates with the initiation and progression of various diseases. Hence, the NLRP3 inflammasome may be a promising therapeutic target for these diseases.

Can multiple miniplates improve the treatment of comminuted patellar fracture?

Background: We have applied primarily multiple locking compression miniplates in treating multifragmentary, comminuted patellar fracture in combination with conventional fixation methods.

Methods: Medical and radiologic data were retrospectively reviewed for the patients surgically fixated with locking compression miniplates in patellar fracture of AO/OTA 34-C3. The primary outcome was bone union at the final follow-up, and the secondary outcomes were functional outcomes and postoperative complications associated with the procedure.

Simultaneous bright- and dark-field X-ray microscopy at X-ray free electron lasers.

The structures, strain fields, and defect distributions in solid materials underlie the mechanical and physical properties across numerous applications. Many modern microstructural microscopy tools characterize crystal grains, domains and defects required to map lattice distortions or deformation, but are limited to studies of the (near) surface. Generally speaking, such tools cannot probe the structural dynamics in a way that is representative of bulk behavior.

Temperature-insensitive label-free SARS-CoV-2 spike protein detection based on complementary refractive index and temperature dependence of multi-mode interference and grating resonance.

We demonstrated temperature-insensitive, label-free detection of SARS-CoV-2 spike protein (SSP) by harnessing the complementary refractive index and temperature dependence of multi-mode interference (MMI) created by a no-core fiber (NCF) and phase-matched resonance generated by a long-period fiber grating (LPFG). To combine MMI and grating resonance, primarily sensitive to the surrounding medium refractive index (SMRI) and ambient temperature, respectively, a fiber-optic transducer was fabricated by splicing an NCF segment with an LPFG inscribed on double-clad fiber. The transducer was functionalized with human ACE2 receptors to selectively capture SSP.

Effects of Plasma-Activated Water Treatment on the Inactivation of Microorganisms Present on Cherry Tomatoes and in Used Wash Solution.

Herein, we investigated the potential of plasma-activated water (PAW) as a wash solution for the microbial decontamination of cherry tomatoes. We analyzed the efficacy of PAW as a bactericidal agent based on reactive species and pH. Immersion for 5 min in PAW15 (generated via plasma activation for 15 min) was determined as optimal for microbial decontamination of fresh produce.

Microfluidic Bioreactor with Fibrous Micromixers for In Vitro mRNA Transcription.

A new type of microfluidic bioreactor with fibrous micromixers for the ingredient mixing and a long macrochannel for the in vitro transcription reaction was fabricated for the continuous production of mRNA. The diameter of the fibrous microchannels in the micromixers was tuned by using an electrospun microfibrous disc with different microfiber diameters. The micromixer with a larger diameter of fibrous microchannels exhibited a better mixing performance than the others.