Label-free SERS-ML detection of cocaine trace in human blood plasma.

The widespread consumption of cocaine poses a significant threat to modern society. The most effective way to combat this problem is to control the distribution of cocaine, based on its accurate and sensitive detection. Here, we proposed the detection of cocaine in human blood plasma using a combination of surface enhanced Raman spectroscopy and machine learning (SERS-ML).

Polymer-Metal Bilayer with Alkoxy Groups for Antibacterial Improvement.

Many bio-applicable materials, medical devices, and prosthetics combine both polymer and metal components to benefit from their complementary properties. This goal is normally achieved by their mechanical bonding or casting only. Here, we report an alternative easy method for the chemical grafting of a polymer on the surfaces of a metal or metal alloys using alkoxy amine salt as a coupling agent.

Smart multi stimuli-responsive electrospun nanofibers for on-demand drug release.

Here, we report poly(N-isopropylacrylamide-co-acrylic acid) (PNIPAm-co-AAc) microgel-loaded polycaprolactone (PCL) nanofibers as temperature-, pH- and electro-responsive materials. First, the PNIPAm-co-AAc microgels were prepared by precipitation polymerization and then electrospun with PCL. The morphology of the prepared materials, analysed by scanning electron microscopy, showed a narrow nanofiber distribution in the range of 500-800 nm, depending on microgel content.

Creation and Plasmon-Assisted Photosensitization of Annealed Z-Schemes for Sunlight-Only Water Splitting.

Solely light-induced water splitting represents a promising avenue for a carbon-free energy future, based on reliable energy sources. Such processes can be performed using coupled semiconductor materials (the so-called direct Z-scheme design) that facilitate spatial separation of (photo)excited electrons and holes, prevent their recombination, and allow water-splitting half-reactions proceeding at each corresponding semiconductor side. In this work, we proposed and prepared a specific structure, based on WO/CdWO/CdS coupled semiconductors, created by annealing of a common WO/CdS direct Z-scheme.

Coupling of plasmonic hot spots with shurikens for superchiral SERS-based enantiomer recognition.

Detection of enantiomers is a challenging problem in drug development as well as environmental and food quality monitoring where traditional optical detection methods suffer from low signals and sensitivity. Application of surface enhanced Raman scattering (SERS) for enantiomeric discrimination is a powerful approach for the analysis of optically active small organic or large biomolecules. In this work, we proposed the coupling of disposable chiral plasmonic shurikens supporting the chiral near-field distribution with SERS active silver nanoclusters for enantio-selective sensing.

Beyond the Platinum Era─Scalable Preparation and Electrochemical Activation of TaS Flakes.

Among 2D materials, transition-metal dichalcogenides (TMDCs) of group 5 metals recently have attracted substantial interest due to their superior electrocatalytic activity toward hydrogen evolution reaction (HER). However, a straightforward and efficient synthesis of the TMDCs which can be easily scaled up is missing. Herein, we report an innovative, simple, and scalable method for tantalum disulfide (TaS) synthesis, involving CS as a sulfurizing agent and TaO as a metal precursor.

Ciprofloxacin-Loaded Poly(-isopropylacrylamide--acrylamide)/Polycaprolactone Nanofibers as Dual Thermo- and pH-Responsive Antibacterial Materials.

Nanofibers are an attractive option in drug release, especially as antibacterial materials. However, there is no universal antibacterial material and little attention has been devoted to bacteria-nanofiber attachment. Poly(-isopropylacrylamide--acrylamide) is particularly interesting due to its dual thermo- and pH-responsive nature.

SERS and advanced chemometrics - Utilization of Siamese neural network for picomolar identification of beta-lactam antibiotics resistance gene fragment.

The enormous development and expansion of antibiotic-resistant bacterial strains impel the intensive search for new methods for fast and reliable detection of antibiotic susceptibility markers. Here, we combined DNA-targeted surface functionalization, surface-enhanced Raman spectroscopy (SERS) measurements, and subsequent spectra processing by decision system (DS) for detection of a specific oligonucleotide (ODN) sequence identical to a fragment of blaNDM-1 gene, responsible for β-lactam antibiotic resistance. The SERS signal was measured on plasmonic gold grating, functionalized with capture ODN, ensuring the binding of corresponded ODNs.

Physically Switchable Antimicrobial Surfaces and Coatings: General Concept and Recent Achievements.

Bacterial environmental colonization and subsequent biofilm formation on surfaces represents a significant and alarming problem in various fields, ranging from contamination of medical devices up to safe food packaging. Therefore, the development of surfaces resistant to bacterial colonization is a challenging and actively solved task. In this field, the current promising direction is the design and creation of nanostructured smart surfaces with on-demand activated amicrobial protection.

Printable Resin Modified by Grafted Silver Nanoparticles for Preparation of Antifouling Microstructures with Antibacterial Effect.

The usage of three-dimensional (3D) printed materials in many bioapplications has been one of the fastest-growing sectors in the nanobiomaterial industry in the last couple of years. In this work, we present a chemical approach for grafting silver nanoparticles (AgNPs) into a resin matrix, which is convenient for 3D printing. In this way, the samples can be prepared and are able to release silver ions (Ag) with excellent antibacterial effect against bacterial strains of and .

Switchable PNIPAm/PPyNT Hydrogel for Smart Supercapacitors: External Control of Capacitance for Pulsed Energy Generation or Prolongation of Discharge Time.

Supercapacitors based on nonresponsive polymer hydrogels are gaining significant attention due to their fabrication simplicity and high potential for wearable electronics. However, the use of smart hydrogels in supercapacitor design remains unexplored. In this work, a smart externally controlled supercapacitor based on a temperature-responsive hydrogel doped with polypyrrole nanotubes (PPyNTs) is proposed.

Polypyrrole-Based Nanorobots Powered by Light and Glucose for Pollutant Degradation in Water.

Novel photoactive and enzymatically active nanomotors were developed for efficient organic pollutant degradation. The developed preparation route is simple and scalable. Light-absorbing polypyrrole nanoparticles were equipped with a bi-enzyme [glucose oxidase/catalase (GOx/Cat)] system enabling the simultaneous utilization of light and glucose as energy sources for jet-induced nanoparticle movement and active radical production.

Enantioselective SERS sensing of pseudoephedrine in blood plasma biomatrix by hierarchical mesoporous Au films coated with a homochiral MOF.

Here, we present a new family of hierarchical porous hybrid materials as an innovative tool for ultrasensitive and selective sensing of enantiomeric drugs in complex biosamples via chiral surface-enhanced Raman spectroscopy (SERS). Hierarchical porous hybrid films were prepared by the combination of mesoporous plasmonic Au films and microporous homochiral metal-organic frameworks (HMOFs). The proposed hierarchical porous substrates enable extremely low limit of detection values (10 M) for pseudoephedrine in undiluted blood plasma due to dual enhancement mechanisms (physical enhancement by the mesoporous Au nanostructures and chemical enhancement by HMOF), chemical recognition by HMOF, and a discriminant function for bio-samples containing large biomolecules, such as blood components.

Can Plasmon Change Reaction Path? Decomposition of Unsymmetrical Iodonium Salts as an Organic Probe.

Plasmon-assisted transformations of organic compounds represent a novel opportunity for conversion of light to chemical energy at room temperature. However, the mechanistic insights of interaction between plasmon energy and organic molecules is still under debate. Herein, we proposed a comprehensive study of the plasmon-assisted reaction mechanism using unsymmetric iodonium salts (ISs) as an organic probe.

Fast and All-Optical Hydrogen Sensor Based on Gold-Coated Optical Fiber Functionalized with Metal-Organic Framework Layer.

Remote detection of hydrogen, without the utilization of electronic component or elevated temperature, is one of the hot topics in the hydrogen technology and safety. In this work, the design and realization of the optical fiber-based hydrogen sensor with unique characteristics are proposed. The proposed sensor is based on the gold-coated multimode fiber, providing the plasmon properties, decorated by the IRMOF-20 layer with high selectivity and affinity toward hydrogen.

Application of Plasmon-Induced Lithography for Creation of a Residual-Free Pattern and Simple Surface Modifications.

Here, we propose a plasmon-induced redistribution of a thin polymer layer as a unique way for a residual layer-free lithographic approach. In particular, we demonstrate an ultrafast area-selective fabrication method using a low-intensity visible laser irradiation to direct the polymer mass flow, under the plasmon-active substrates. Plasmon-supported substrates were created by thermal annealing of Ag thin films and covered by thin polystyrene layers.

Helicene-SPP-Based Chiral Plasmonic Hybrid Structure: Toward Direct Enantiomers SERS Discrimination.

Achieving chiral plasmon response based on the combination of achiral plasmonic nanostructures with highly chiral surrounding medium represents an attractive way for creation of hybrid optically active plasmonic materials. In this work, we present an attractive design and fabrication of chiral plasmon substrates based on a surface plasmon-polariton-supported structure coupled with extremely optically active helicene enantiomers. Such approach allows us to excite chiral plasmon waves and to design optically active surface-enhanced Raman spectroscopy substrates.

Smart, Piezo-Responsive Polyvinylidenefluoride/Polymethylmethacrylate Surface with Triggerable Water/Oil Wettability and Adhesion.

The design of smart surfaces with externally triggerable water/oil wettability and adhesion represents one of the most up-to-date challenges in the field of material science. In this work, the intelligent surface with electrically triggerable wettability and water/oil adhesion is presented. As a basic material background exhibiting electric field (EF) sensitivity, the piezo-responsive polymethylmethacrylate/polyvinylidenefluoride polymer fibers were used.

Synthesis, Characterization, and Antimicrobial Activity of Near-IR Photoactive Functionalized Gold Multibranched Nanoparticles.

Surface-modified gold multibranched nanoparticles (AuMs) were prepared by simple chemical reduction of gold chloride aqueous solution followed by in situ modification by using water-soluble arenediazonium tosylates with different functional organic groups. Chemical and morphological structures of the prepared nanoparticles were examined by using transmission electron and scanning electron microscopies. The covalent grafting of organic compounds was confirmed by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) and Raman spectroscopy techniques.

Temperature-responsive PLLA/PNIPAM nanofibers for switchable release.

Smart antimicrobial materials with on-demand drug release are highly desired for biomedical applications. Herein, we report about temperature-responsive poly(N-isopropylacrylamide) (PNIPAM) nanospheres doped with crystal violet (CV) and incorporated into the poly-l-lactide (PLLA) nanofibers. The nanofibers were prepared by electrospinning, using different initial polymers ratios.

Light-activated polymethylmethacrylate nanofibers with antibacterial activity.

The creation of an antibacterial material with triggerable properties enables us to avoid the overuse or misuse of antibacterial substances and, thus, prevent the emergence of resistant bacterial strains. As a potential light-activated antibacterial material, polymethylmethacrylate (PMMA) nanofibers doped with silver nanoparticles (AgNPs) and meso-tetraphenylporphyrin (TPP) were prepared by electrospinning. TPP was chosen as an effectively reactive oxygen species (ROS) producer.

Preparation of periodic surface structures on doped poly(methyl metacrylate) films by irradiation with KrF excimer laser.

In this work, we describe laser modification of poly(methyl methacrylate) films doped with Fast Red ITR, followed by dopant exclusion from the bulk polymer. By this procedure, the polymer can be modified under extremely mild conditions. Creation of surface ordered structure was observed already after application of 15 pulses and 12 mJ cm(-2) fluence.