Anion-Doped Thickness-Insensitive Electron Transport Layer for Efficient Organic Solar Cells.

In organic solar cells, interfacial materials play essential roles in charge extraction, transportation, and collection. Currently, highly efficient and thickness-insensitive interfacial materials are urgently needed in printable large area module devices. Herein, water/alcohol-soluble conjugated polyelectrolyte PFNBT-Br, with medium bandgap based on benzothiadiazole, are doped by two alkali metal sodium salts, NaH PO , Na C O with different counter anions, to pursue high efficiency and thickness-insensitive electron-transport layers.

Color-Stable and High-Efficiency Blue Perovskite Nanocrystal Light-Emitting Diodes via Monovalent Copper Ion Lowering Lead Defects.

Light-emitting diodes using metal halide perovskite (PeLEDs) exhibit a strong potential for emerging display technologies due to their unique optoelectronic characteristics. However, for blue emission PeLEDs, there remains a huge challenge to achieve high performance, an issue that has been addressed in their red and green counterparts. The community is circumventing the challenges in synthesizing stable, high-quantum-efficiency, and low-defect-density blue emitters.

Robust nonfullerene solar cells approaching unity external quantum efficiency enabled by suppression of geminate recombination.

Nonfullerene solar cells have increased their efficiencies up to 13%, yet quantum efficiencies are still limited to 80%. Here we report efficient nonfullerene solar cells with quantum efficiencies approaching unity. This is achieved with overlapping absorption bands of donor and acceptor that increases the photon absorption strength in the range from about 570 to 700 nm, thus, almost all incident photons are absorbed in the active layer.

ZnO-PCBM bilayers as electron transport layers in low-temperature processed perovskite solar cells.

We investigate an electron transport bilayer fabricated at <110 °C to form all low-temperature processed, thermally stable, efficient perovskite solar cells with negligible hysteresis. The components of the bilayer create a symbiosis that results in improved devices compared with either of the components being used in isolation. A sol-gel derived ZnO layer facilitates improved energy level alignment and enhanced charge carrier extraction and a [6,6]-phenyl-C-butyric acid methyl ester (PCBM) layer to reduce hysteresis and enhance perovskite thermal stability.

Barbiturate end-capped non-fullerene acceptors for organic solar cells: tuning acceptor energetics to suppress geminate recombination losses.

We report the synthesis of two barbiturate end-capped non-fullerene acceptors and demonstrate their efficient function in high voltage output organic solar cells. The acceptor with the lower LUMO level is shown to exhibit suppressed geminate recombination losses, resulting in enhanced photocurrent generation and higher overall device efficiency.

Impact of Aggregation on the Photochemistry of Fullerene Films: Correlating Stability to Triplet Exciton Kinetics.

The photochemistry and stability of fullerene films is found to be strongly dependent upon film nanomorphology. In particular, PCBM blend films, dispersed with polystyrene, are found to be more susceptible to photobleaching in air than the more aggregated neat films. This enhanced photobleaching correlated with increased oxygen quenching of PCBM triplet states and the appearance of a carbonyl FTIR absorption band indicative of fullerene oxidation, suggesting PCBM photo-oxidation is primarily due to triplet-mediated singlet oxygen generation.

High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor.

Solution-processed organic photovoltaics (OPV) offer the attractive prospect of low-cost, light-weight and environmentally benign solar energy production. The highest efficiency OPV at present use low-bandgap donor polymers, many of which suffer from problems with stability and synthetic scalability. They also rely on fullerene-based acceptors, which themselves have issues with cost, stability and limited spectral absorption.

Toward Improved Lifetimes of Organic Solar Cells under Thermal Stress: Substrate-Dependent Morphological Stability of PCDTBT:PCBM Films and Devices.

Unlabelled: Morphological stability is a key requirement for outdoor operation of organic solar cells. We demonstrate that morphological stability and lifetime of polymer/fullerene based solar cells under thermal stress depend strongly on the substrate interface on which the active layer is deposited. In particular, we find that the stability of benchmark PCDTBT/PCBM solar cells under modest thermal stress is substantially increased in inverted solar cells employing a ZnO substrate compared to conventional devices employing a

Pedot: PSS substrate.

A rhodanine flanked nonfullerene acceptor for solution-processed organic photovoltaics.

A novel small molecule, FBR, bearing 3-ethylrhodanine flanking groups was synthesized as a nonfullerene electron acceptor for solution-processed bulk heterojunction organic photovoltaics (OPV). A straightforward synthesis route was employed, offering the potential for large scale preparation of this material. Inverted OPV devices employing poly(3-hexylthiophene) (P3HT) as the donor polymer and FBR as the acceptor gave power conversion efficiencies (PCE) up to 4.

Enhancing fullerene-based solar cell lifetimes by addition of a fullerene dumbbell.

Cost-effective, solution-processable organic photovoltaics (OPV) present an interesting alternative to inorganic silicon-based solar cells. However, one of the major remaining challenges of OPV devices is their lack of long-term operational stability, especially at elevated temperatures. The synthesis of a fullerene dumbbell and its use as an additive in the active layer of a PCDTBT:PCBM-based OPV device is reported.

Morphological stability and performance of polymer-fullerene solar cells under thermal stress: the impact of photoinduced PC60BM oligomerization.

We report a general light processing strategy for organic solar cells (OSC) that exploits the propensity of the fullerene derivative PC60BM to photo-oligomerize, which is capable of both stabilizing the polymer:PC60BM active layer morphology and enhancing the device stability under thermal annealing. The observations hold for blends of PC60BM with an array of benchmark donor polymer systems, including P3HT, DPP-TT-T, PTB7, and PCDTBT. The morphology and kinetics of the thermally induced PC60BM crystallization within the blend films are investigated as a function of substrate and temperature.

Performance enhancement of fullerene-based solar cells by light processing.

A key challenge to the commercialization of organic bulk heterojunction solar cells is the achievement of morphological stability, particularly under thermal stress conditions. Here we show that a low-level light exposure processing step during fabrication of blend polymer:PC60BM solar cells can result in a 10-fold increase in device thermal stability and, under certain conditions, enhanced device performance. The enhanced stability is linked to the light-induced oligomerization of PC60BM that effectively hinders their diffusion and crystallization in the blend.

Pretension effects of the Dynesys cord on the tissue responses and screw-spacer behaviors of the lumbosacral construct with hybrid fixation.

Study Design: The pretension of the Dynesys cord was varied to evaluate its effects on both tissue responses and screw-spacer behaviors by the finite-element method.

Objective: This study aimed to provide detailed information about the motion-preserving and load-shielding mechanisms of the Dynesys screw-spacer joint.

Summary Of Background Data: Intuitively, higher cord pretension aims to ensure the occurrence of screw-spacer contact, thus making the spacer the transmitter of the vertebral loads.