Low-Temperature Exsolution of Rh from Mixed ZnFeRh Oxides toward Stable and Selective Catalysts in Liquid-Phase Hydroformylation.

The exsolution of metal nanoparticles offers a promising strategy to enhance catalyst stability and fine-tune metal-support interactions. Expanding the use of exsolved nanoparticles in heterogeneous catalysis requires the development of low-temperature ( < 400 °C) exsolution processes. In this study, we report the synthesis of phase-pure ZnFeRhO metal oxide precursors with a spinel-type crystal structure.

Rationally designed laterally-condensed-catalysts deliver robust activity and selectivity for ethylene production in acetylene hydrogenation.

Future carbon management strategies require storage in elemental form, achievable through a sequence of CO hydrogenation reactions. Hydrogen is recycled from molecular intermediates by dehydrogenation, and side product acetylene selectively hydrogenated to ethylene. Existing Pd alloy catalysts for gas purification underperform in concentrated feeds, necessitating novel concepts.

CO Oxidation Catalyzed by Perovskites: The Role of Crystallographic Distortions Highlighted by Systematic Experiments and Artificial Intelligence.

The identification of key materials' parameters correlated with the performance can accelerate the development of heterogeneous catalysts and unveil the relevant underlying physical processes. However, the analysis of correlations is often hindered by inconsistent data. Besides, nontrivial, yet unknown relationships may be important, and the intricacy of the various processes may be significant.

Direct observation of the complex S(IV) equilibria at the liquid-vapor interface.

The multi-phase oxidation of S(IV) plays a crucial role in the atmosphere, leading to the formation of haze and severe pollution episodes. We here contribute to its understanding on a molecular level by reporting experimentally determined pK values of the various S(IV) tautomers and reaction barriers for SO formation pathways. Complementary state-of-the-art molecular-dynamics simulations reveal a depletion of bisulfite at low pH at the liquid-vapor interface, resulting in a different tautomer ratio at the interface compared to the bulk.

Achieving Digital Catalysis: Strategies for Data Acquisition, Storage and Use.

Heterogeneous catalysis is an important area of research that generates data as intricate as the phenomenon itself. Complexity is inherently coupled to the function of the catalyst and advance in knowledge can only be achieved if this complexity is adequately captured and accounted for. This requires integration of experiment and theory, high data quality and quality control, close interdisciplinary collaboration, and sharing of data and metadata, which is facilitated by the application of joint data management strategies.

Data-Centric Heterogeneous Catalysis: Identifying Rules and Materials Genes of Alkane Selective Oxidation.

Artificial intelligence (AI) can accelerate catalyst design by identifying key physicochemical descriptive parameters correlated with the underlying processes triggering, favoring, or hindering the performance. In analogy to genes in biology, these parameters might be called "materials genes" of heterogeneous catalysis. However, widely used AI methods require big data, and only the smallest part of the available data meets the quality requirement for data-efficient AI.

Shape-Dependent CO Hydrogenation to Methanol over CuO Nanocubes Supported on ZnO.

The hydrogenation of CO to methanol over Cu/ZnO-based catalysts is highly sensitive to the surface composition and catalyst structure. Thus, its optimization requires a deep understanding of the influence of the pre-catalyst structure on its evolution under realistic reaction conditions, including the formation and stabilization of the most active sites. Here, the role of the pre-catalyst shape (cubic vs spherical) in the activity and selectivity of ZnO-supported Cu nanoparticles was investigated during methanol synthesis.

Green synthesis of propylene oxide directly from propane.

The chemical industry faces the challenge of bringing emissions of climate-damaging CO to zero. However, the synthesis of important intermediates, such as olefins or epoxides, is still associated with the release of large amounts of greenhouse gases. This is due to both a high energy input for many process steps and insufficient selectivity of the underlying catalyzed reactions.

Transition-Metal-Doping of CaO as Catalyst for the OCM Reaction, a Reality Check.

In this study, first-row transition metal-doped calcium oxide materials (Mn, Ni, Cr, Co., and Zn) were synthesized, characterized, and tested for the OCM reaction. Doped carbonate precursors were prepared by a co-precipitation method.

The Influence of the Chemical Potential on Defects and Function of Perovskites in Catalysis.

A Sm-deficient SmMnO perovskite was prepared on a gram scale to investigate the influence of the chemical potential of the gas phase on the defect concentration, the oxidation states of the metals and the nature of the oxygen species at the surface. The oxide was treated at 450°C in nitrogen, synthetic air, oxygen, water vapor or CO and investigated for its properties as a catalyst in the oxidative dehydrogenation of propane both before and after treatment. After treatment in water vapor, but especially after treatment with CO, increased selectivity to propene was observed, but only when water vapor was added to the reaction gas.

Enhancing the Catalytic Activity of Palladium Nanoparticles via Sandwich-Like Confinement by Thin Titanate Nanosheets.

As atomically thin oxide layers deposited on flat (noble) metal surfaces have been proven to have a significant influence on the electronic structure and thus the catalytic activity of the metal, we sought to mimic this architecture at the bulk scale. This could be achieved by intercalating small positively charged Pd nanoparticles of size 3.8 nm into a nematic liquid crystalline phase of lepidocrocite-type layered titanate.

Materials genes of heterogeneous catalysis from clean experiments and artificial intelligence.

Abstract: The performance in heterogeneous catalysis is an example of a complex materials function, governed by an intricate interplay of several processes (e.g., the different surface chemical reactions, and the dynamic restructuring of the catalyst material at reaction conditions).

Nanoparticles Supported on Sub-Nanometer Oxide Films: Scaling Model Systems to Bulk Materials.

Ultrathin layers of oxides deposited on atomically flat metal surfaces have been shown to significantly influence the electronic structure of the underlying metal, which in turn alters the catalytic performance. Upscaling of the specifically designed architectures as required for technical utilization of the effect has yet not been achieved. Here, we apply liquid crystalline phases of fluorohectorite nanosheets to fabricate such architectures in bulk.

Tungsten-niobium oxide bronzes: a bulk and surface structural study.

Materials from the WO3-Nb2O5 system, presenting bronze-type crystal structures, display outstanding functional properties for several applications as thermoelectric materials, lithium-ion battery electrodes, or catalysts. In this work, a series of W-Nb-O oxide bronzes have been synthesized by the hydrothermal method (with Nb/(W + Nb) ratios in the range of 0-1). A combination of bulk and surface characterisation techniques has been applied to get further insights into: (i) the effect of thermal treatments on as-prepared materials and (ii) the surface chemical nature of W-Nb-O oxide bronzes.

Fluctuating Storage of the Active Phase in a Mn-Na WO /SiO Catalyst for the Oxidative Coupling of Methane.

Structural dynamics of a Mn-Na WO /SiO catalyst were detected directly under reaction conditions during the oxidative coupling of methane via in situ XRD and operando Raman spectroscopy. A new concept of fluctuating storage and release of an active phase in heterogeneous catalysis is proposed that involves the transient generation of active sodium oxide species via a reversible reaction of Na WO with Mn SiO . The process is enabled by phase transitions and melting at the high reaction temperatures that are typically applied.

Site specific and localized structural displacements in open structured multimetallic oxides.

The structures of solids can locally differ from the macroscopic picture obtained by structural averaging techniques. This difference significantly influences the performance of any functional material. Measurements of these local structures are challenging.

Catalytic activity, water formation, and sintering: Methane activation over Co- and Fe-doped MgO nanocrystals.

Microstructure, structure, and compositional homogeneity of metal oxide nanoparticles can change dramatically during catalysis. Considering the different stabilities of cobalt and iron ions in the MgO host lattice [M. Niedermaier et al.

Atomic-Scale Observation of the Metal-Promoter Interaction in Rh-Based Syngas-Upgrading Catalysts.

The direct conversion of syngas to ethanol, typically using promoted Rh catalysts, is a cornerstone reaction in CO utilization and hydrogen storage technologies. A rational catalyst development requires a detailed structural understanding of the activated catalyst and the role of promoters in driving chemoselectivity. Herein, we report a comprehensive atomic-scale study of metal-promoter interactions in silica-supported Rh, Rh-Mn, and Rh-Mn-Fe catalysts by aberration-corrected (AC) TEM.

How to control selectivity in alkane oxidation?

The well-defined particle morphology of crystalline MnWO catalysts investigated in the present study facilitates obtaining insight into the origin of selectivity limitations in alkane oxidation. Hydrothermal synthesis at variable pH values granted access to a series of phase-pure MnWO catalysts with particles ranging from cube-like (aspect ratio 1.5) to rod- or needle-like (aspect ratio 6.

Comparative study of the strongest solid Lewis acids known: ACF and HS-AlF.

Aluminium chlorofluoride (ACF) and high-surface aluminium fluoride (HS-AlF3) were analyzed by a set of characterization methods to assess their acidic properties: NH3-TPD, CO adsorption followed by DRIFTS, CD3CN-PAS-FTIR and MAS NMR spectroscopy after 15N-pyridine adsorption. Both catalysts contain very strong and medium-strong Lewis acid sites as confirmed by CO adsorption, in which small differences arise from the morphological properties of each catalyst, with ACF being microporous and HS-AlF3 mesoporous. Shifts of the CO vibration band of up to 77 cm-1 were observed, which account for very strong Lewis acid sites.

Insights into structure and dynamics of (Mn,Fe)O-promoted Rh nanoparticles.

The mutual interaction between Rh nanoparticles and manganese/iron oxide promoters in silica-supported Rh catalysts for the hydrogenation of CO to higher alcohols was analyzed by applying a combination of integral techniques including temperature-programmed reduction (TPR), X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS) and Fourier transform infrared (FTIR) spectroscopy with local analysis by using high angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) in combination with energy dispersive X-ray spectroscopy (EDX). The promoted catalysts show reduced CO adsorption capacity as evidenced through FTIR spectroscopy, which is attributed to a perforated core-shell structure of the Rh nano-particles in accordance with the microstructural analysis from electron microscopy. Iron and manganese occur in low formal oxidation states between 2+ and zero in the reduced catalysts as shown by using TPR and XAS.