Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Activated carbon (AC) and biochar (BC) are porous substances derived from any carbonous material known to be highly effective adsorbents, making them valuable for removing pollutants like heavy metals. This study evaluated and compared the potential of AC and BC produced from sp. by chemical activation and pyrolysis process for heavy metal removal, specifically Co ions, to commercial AC (COMAC). Various techniques were employed to characterize these samples including FTIR, zeta potential, and surface area. Additionally, considering parameters such as pH, initial solution concentration, and the effect of AC/BC dose were investigated. The adsorption isotherm was also assessed. The results showed that a strong dependence of the adsorption capacity on pH was observed with optimal performance at ~6.8. Additionally, the optimal initial solution concentration was determined to be ~2 mmol/L. According to the Langmuir isotherm model, AC derived- sp. exhibited maximum uptakes of 468.97 mg/g, higher than COMAC and BC. The experiment at different adsorbent dosages revealed that AC from sp. outperformed other samples, with adsorption capacity observed at 94.94% as the dosage increased.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC12386870PMC
http://dx.doi.org/10.3390/ijms26167666DOI Listing

Publication Analysis

Top Keywords

activated carbon
8
carbon biochar
8
initial solution
8
solution concentration
8
adsorption capacity
8
capacity observed
8
cobalt ion
4
ion removal
4
removal activated
4
biochar derived
4

Similar Publications

The rapid development of industry and agriculture has led to a significant increase in the toxicity and pollution of cadmium (Cd) and lead (Pb) in soil. Consequently, soil remediation employing biochar or modified biochar has emerged as a cost-effective and environmentally sustainable approach to address the issue of heavy metal (HM) ion pollution. PEI-functionalization biochar (PBC) derived from corn straw (PBCC), wood straw (PBCW), and rice straw (PBCR) was synthesized to immobilize Cd and Pb in contaminated acidic yellow soil.

View Article and Find Full Text PDF

Advances in the application of carbon materials for anammox enhancement: A comprehensive review.

J Environ Manage

September 2025

National and Local Joint Engineering Laboratory of Municipal Sewage Resource Utilization Technology, Jiangsu Collaborative Innovation Center of Technology and Material of Water Treatment, School of Environmental Science and Engineering, Suzhou University of Science and Technology, Suzhou, 215009, Ch

The anaerobic ammonia oxidation (anammox) process has attracted considerable interest for its advantages in low energy requirements, reduced sludge output, and eliminating the need for external carbon sources. However, its application is constrained by the long generation time, slow growth, and challenges in enriching anammox bacteria. Studies indicate that carbon material addition significantly accelerates anammox bacteria proliferation, enhances nitrogen removal efficiency, and improves anammox microbial activity.

View Article and Find Full Text PDF

Biological denitrification is an essential method for sewage treatment, though its efficiency is often constrained by low temperatures and insufficient organic carbon sources. In this study, a novel cold-tolerant heterotrophic nitrification-aerobic denitrification bacterium, Pseudomonas fluorescens sp. Z03, was isolated from activated sludge, and its denitrification performance was evaluated.

View Article and Find Full Text PDF

The sustainable synthesis of bio-based monomers from renewable biomass intermediates is a central goal in green chemistry and biorefinery innovation. This study introduces a synergistic catalytic-enzymatic strategy for the efficient and eco-friendly oxidation of 5-hydroxymethylfurfural (5-HMF) into 2,5-furandicarboxylic acid (FDCA), a key monomer for next-generation biodegradable plastics. The catalytic phase employed non-noble metal catalysts, MnO and Co-Mn supported on activated carbon (Co-Mn/AC), under mild batch reaction conditions at 90 °C.

View Article and Find Full Text PDF

pH-responsive activation of Tet-On inducible CAR-T cells enables spatially selective treatment of targeted solid tumors at reduced safety risk.

Natl Sci Rev

September 2025

Institute of Functional Nano & Soft Materials (FUNSOM), Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Soochow University, Suzhou 215123, China.

Chimeric antigen receptor T (CAR-T)-cell therapy is a promising resolution for solid tumors, but its corresponding clinical translation has been hindered by unsatisfactory therapeutic potency and severe cytokine release syndrome. Herein, tetracycline (Tet)-On inducible human epidermal growth factor receptor 1 (HER1)-targeted CAR-T (Tet-HER1-CAR-T) cells were engineered to enable spatially selective activation at tumor sites by doxycycline (Doxy), which is delivered by pH-responsive stealth liposomal calcium carbonate nanoparticles (Doxy@CaCO-PEG). Compared with the intravenous administration of conventional HER1-CAR-T cells and Tet-HER1-CAR-T cells activated by free Doxy, concurrent intravenous administration of Tet-HER1-CAR-T cells and Doxy@CaCO-PEG leads to the localized tumor activation of Tet-HER1-CAR-T cells and reduced systemic secretion of inflammatory cytokines.

View Article and Find Full Text PDF